Re: kernel-image-2.6.7
On Sun, 2004-08-22 at 15:34, Christian T. Steigies wrote:
> images ready for testing will be available here, amiga is done already:
> http://people.debian.org/~cts/debian-m68k/kernel-image/
I'm affraid that's not an improvement for me: black screen, and still no
IDE disks. So it's actually worse than before.
Looks like the black screen is caused by this:
# CONFIG_FRAMEBUFFER_CONSOLE is not set
Ah, and no IDE disks is probably caused by this:
# CONFIG_IDE_GENERIC is not set
Below is the dmesg output.
Kind regards,
Kars.
Searching for SAVEKMSG magic...
Found 3706 bytes at 0x001dc010
>>>>>>>>>>>>>>>>>>>>
Linux version 2.6.8-amiga (root@skeeve) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 22 15:22:14 CEST 2004
Enabling workaround for errata I14
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
Built 1 zonelists
Kernel command line: ro root=/dev/sda2 init=/bin/bash debug=mem console=tty0
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 80x25
Linux version 2.6.8-amiga (root@skeeve) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 22 15:22:14 CEST 2004
Enabling workaround for errata I14
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
Built 1 zonelists
Kernel command line: ro root=/dev/sda1 init=/bin/bash debug=mem console=tty0
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 45840k/48640k available (1632k kernel code, 1016k data, 108k init)
Calibrating delay loop... 99.53 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
SCSI subsystem initialized
Zorro: Probing AutoConfig expansion devices: 1 device
fb0: Amiga AGA frame buffer device, using 1280K of video memory
audit: initializing netlink socket (disabled)
audit(1090510461.650:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A1200 style)
SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
esp0: FAST chip is Symbios Logic 53CF9x-2 (family=20, version=2)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Blizzard1230 SCSI IV
Using anticipatory io scheduler
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300N
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST32550W Rev: 8108
Type: Direct-Access ANSI SCSI revision: 02
Vendor: RICOH Model: MP6200S Rev: 2.20
Type: CD-ROM ANSI SCSI revision: 02
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4124736 512-byte hdwr sectors (2112 MB)
SCSI device sda: drive cache: write through
sda: RDSK sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdb: 4194058 512-byte hdwr sectors (2147 MB)
SCSI device sdb: drive cache: write through
sdb: RDSK sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
esp0: target 2 [period 100ns offset 15 10.00MHz FAST SCSI-II]
sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: Amiga keyboard
input: Amiga mouse at joy0dat
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
amikbd: keyboard interrupt
amikbd: Ctrl-Amiga-Amiga reset warning!!
<<<<<<<<<<<<<<<<<<<<
Reply to: