Tomy Alarie wrote:
Hi, i've wanted to format my seagate barracuda 2.0 gb drive. I've
used Apple HD SC Setup patched, started to initialize.. And then it
bugged. So i've tryed back and the app doesnt see my drive. I've
downloaded APS PowerTools 4. Tryed to do a easy initialize and he
wasnt able to see anything on my drive ? How can i get my drive back >> ?
Try LIDO. Do some research at www.jagshouse.com. Do a search on his
site for LIDO. Works on PPC and m68k. About the best I've seen that's
free.
By the way. Just edit the /etc/network/interfaces file as follows for
DHCP:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
I just followed Christian Steigies' advice. And it worked.
One other trick. Make sure that your dhcp is working in MacOS. I've
seen the ethernet fail to work in Linux if it were not initialized and
working in MacOS. In other words, be using the ethernet for TCP/IP and
appletalk before booting into Linux.
I found that using the <dhclient-2.2.x> command or just <dhclient>
seems to get the trick down after doing an
<ifconfig eth0 down> But I guess the main thing is verifying that
DHCP is working on the MacOS side doesn't hurt.
Hank
--
To UNSUBSCRIBE, email to debian-68k-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org