[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Need Help with Mac II cx

> reset scsi bus
> scsi0 at port 50f100000 irq 19
> options CAN_QUEUE=-16 CMD_PER_LUN=2 release=1
> scsi0
> scsi: 1 host Vendor Quantum model CTS80S Type Direct Access ANSI SCSI rev:v2
> detected scsi disk sda at scsi0 channel 0 id 0 lun0
> scsi0: warning: target bitmask 00 lun0 not in disconnect queue
> scsi0 reselection after won arbitration?
> scsi aborting due to timeout: id:3, scsi0, channel 0, id 1, lun 0, inquiry 00 00 00 ff 00
> scsi0 aborting command
> scsi 0 destination target 1, lun 0 command=inquiry 00 00 00 ff 00

Two things you can try:

- use amother disk

- play with the mac5380=<can_queue>,<cmd_per_lun> kernel option. Setting
one of the two to 1 (I forgot which) will disable disconnects. 

Basically, the disk you use is misbehaving in a way that confuses the SCSI
driver. No point in arguing that MacOS likes the disk, neither disk nor
Linux kernel will listen.


Reply to: