Debian Install Problem
Hi.
I am having a problem installing Debian-68k, ver. 2.1, that you folks might
be able to help me with.
I have an Amiga 1200 with an Apollo 1230 (Wildfire132) acellerator card.
The card has 32 Mb. of RAM, a FPU and MMU. The Amiga has version 3.1 of
the os.
Now the problem. When I try to install Debian 2.1 I get the following error
message and dump:
***COPROCESSOR PROTOCOL VIOLATION*** FORMAT=9
current process id is 1
BAD KERNEL TRAP:00000000
PC: 0000355e
SR: 2700 SP: 01f66d5c
d0: 00001919 d1: 00000212 d2: 000f4200 d3: 00000001
d4: 00000000 d5: 00000000 a0: 01d2ca22 a1: 001bd626
Process init (pid: 1, stackpage=001bc000)
Frame format=9 instr addr=00003558
Stack from 01f66d98:
00000000 000f41f6 01d2c810 001bd414 01001400 01001000 01f66dec 0000c7e8
00002010 00000001 00000000 00000000 00000000 00002000 01f66e00 010efda0
c698d8ca 3c94fcac 365ce951 f90cf05d bec67b21 01f66e08 0000cb34 00000000
01f66e20 01f66e20 01d2c810 01f66e24 000f3aa0 0008f528 01f66e28 001bcf9c
00000005 01d2c9fe 01f67e20 00000000 01f66e00 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace:
[<0000c7e8>] [<00002010>] [<00002000>] [<0000cb34>]
[<0008f528>] [<0008ecab>] [<0008ed4c>]
Code: f229 9c00 0078 fe69 0084 2e69 0000 4cdf 7cc0 2069
(whew)
The computer works normally, otherwise. In fact, until this effort, it had
NetBSD installed.
In the linux-68k FAQ on www.linux-68k.org there is a known bug listed called
the TT-FPU bug. It concerns a hardware fix in an Atari 32Mb ram card and
instructs the user to tie pin 11 of a 16L8 PAL to +5vdc. Says it is to
keep the PAL from "tri-stating AS and DS until XBACK has gone low."
The FAQ states that this bug is only relevant if the victim has that Atari
RAM card.
There it is, folks. If you can help me with this, I would appreciate it.
Sincerely:
Robert Craig
Reply to: