Re: solaris cdrecord BH08LS20 drive BD-R problems
> Do you still have problems with cdrecord on Solaris ?
Thank you for asking Jörg. Today I made some progress.
Sorry I have not had time to look at the USB driver bug.
Previously I was using the JMicron JM20336 USB-SATA bridge.
Now I have the JM20329, apparently a simpler (and slower) chip.
The BH08LS20 drive connected via USB 2.0, using blank BD-R disc.
Now I no longer get the I/O errors for cdrecord -atip (or -v -minfo).
However, even though cdrecord -atip shows that the disc is blank,
when I try to burn, cdrecord gives "capacity is unknown" message.
Please advise me what to try next.
Here is the output from the attempt to burn image to BD-R.
Below that is the output from -v -checkdrive.
# cdrecord -v dev=5,0,0 speed=2 driveropts=burnfree image.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (sparc-sun-solaris2.10) Copyright (C) 1995-2009 J\366rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'BD-RE BH08LS20 '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-ROM
Profile: BD-R sequential recording (current)
Profile: BD-R random recording
Profile: BD-RE
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 2097152 = 2048 KB
Drive pbuf size: 3932160 = 3840 KB
Drive DMA Speed: 3724 kB/s 21x CD 2x DVD 0x BD
FIFO size : 4194304 = 4096 KB
Track 01: data 14911 MB
Total size: 14911 MB = 7634764 sectors
Current Secsize: 2048
cdrecord: Disk capacity is unknown.
cdrecord: Data will not fit on any CD.
cdrecord: DVD/BD capacity is unknown.
cdrecord: Cannot write more than remaining DVD/BD capacity.
------------------------------------------------------
# cdrecord dev=5,0,0 -v -checkdrive
Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (sparc-sun-solaris2.10) Copyright (C) 1995-2009 J\366rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '5,0,0'
scsibus: 5 target: 0 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'BD-RE BH08LS20 '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-ROM
Profile: BD-R sequential recording (current)
Profile: BD-R random recording
Profile: BD-RE
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 2097152 = 2048 KB
Drive pbuf size: 3932160 = 3840 KB
Drive DMA Speed: 3731 kB/s 21x CD 2x DVD 0x BD
Reply to: