Hi !
I applied the patch and now I get this:
[root@smooth bin]# ./cdrecord dev=3,0,0 blank=all
Cdrecord-ProDVD-ProBD-Clone 2.01.01a37 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2008 J?rg Schilling
scsidev: '3,0,0'
scsibus: 3 target: 0 lun: 0
Linux sg driver version: 3.5.34
./cdrecord: Warning Linux Bus mapping botch.
./cdrecord: Warning Linux Bus mapping botch.
./cdrecord: Warning Linux Bus mapping botch.
./cdrecord: Warning Linux Bus mapping botch.
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'BD B LH-2B1S '
Revision : 'AL09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-RE driver (mmc_bdre).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Starting to write CD/DVD/BD at speed 2 in real BLANK mode for
single session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
Running pad based emulation to blank the medium.
secsize 2048 padbytes 25025314816 padblocks 12219392 maxblocks
12219392
Track 00: 0 of 23866 MB pad written.
./cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 13 38 86 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 231.684s timeout 100s
write track pad data: error after 2579771392 bytes
./cdrecord: Input/output error. read buffer cap: scsi sendcmd:
fatal error
CDB: 5C 00 00 00 00 00 00 00 0C 00
resid: 12
cmd finished after 0.000s timeout 100s
./cdrecord: Cannot blank disk, aborting.
./cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: fatal error
CDB: 1E 00 00 00 00 00
cmd finished after 0.000s timeout 100s