[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: cdrecord: problem in auto-formatting blank DVD+RW



On Mon, 27 Nov 2006 01:03:19 +0100, Joerg.Schilling@fokus.fraunhofer.de
(Joerg Schilling) wrote:


>> Is there a quick way to test if cdrecord thinks a dvd+rw is maiden or not,
>> without issuing a format or write command? Ie, is there a command like
>> "-atip" or similar which will prints out if the dvd+rw is maiden?
>
>Could you please check cdrtools-2.01.01a21 with the medium that is not
>detected as "maiden"?
>Please call "cdrecord -minfo" and report the result for the "maiden" medium.

I'm afraid you didn't receive my email dated 2006-11-21 in which I said that
since you added the maiden info at the end of -atip cdrecord would correctly
detect maiden status (even if not autoformatting probably due to firmware
bug); unfortunately I cannot test with the problematic system right now, I'm
attaching my email and the logs.

=========== 2006-11-21
I upgraded cdrecord to 2.01.01.a20.
New cdrecord displays if media is maiden at the end of -atip;
cdrecord will correctly detect that it's maiden (like dvd+rw-mediainfo), but
with this particular burner it will not autoformat (it  autoformats ok with
other burners).
I'm attaching the logs.

I understand this is probably a firmware/burner problem, so this email is
just FYI, I'm not expecting a solution.

Unfortunately I can test with this system only occasionally, so I don't know
when I'll be able to do more tests.
=================================
-atip on maiden media (detected as maiden/unformatted)
=================================
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg transport code version 'schily-scsi-linux-sg.c-1.86'
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01.01a20 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
Using remote (pipe) mode for interactive i/o.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PHILIPS '
Identifikation : 'DVD+-RW DVD8801 '
Revision       : '4D28'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+RW
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW (current)
Profile: DVD-RW sequential overwrite 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Feature: 'Profile List' (current) (persistent)
Feature: 'Core' (current) (persistent)
Feature: 'Morphing' (current) (persistent)
Feature: 'Removable Medium' (current) (persistent)
Feature: 'Random Readable'  
Feature: 'Multi Read'  
Feature: 'CD Read'  
Feature: 'DVD Read'  
Feature: 'Random Writable'  
Feature: 'Incremental Streaming Writable'  
Feature: 'Formattable' (current) 
Feature: 'Restricted Overwrite'  
Feature: 'DVD+RW' (current) 
Feature: 'DVD+R'  
Feature: 'Rigid Restricted Overwrite'  
Feature: 'CD Track at Once'  
Feature: 'CD Mastering'  
Feature: 'DVD-R/-RW Write'  
Feature: 'DVD+R/DL Read'  
Feature: 'Power Management' (current) (persistent)
Feature: 'CD Audio analog play'  
Feature: 'Time-out' (current) (persistent)
Feature: 'DVD-CSS'  
Feature: 'Real Time Streaming' (current) 
Feature: 'Logical Unit Serial Number' (current) (persistent)	Serial: 'VA155S63161990      '
Feature: 'Disk Control Blocks'  
Feature: 'DVD CPRM'  
Feature: 'VCPS'  
Feature: 0xFFDE (current) 
Feature: 0xFFDF (current) (persistent)
Drive current speed: 4
Drive default speed: 4
Drive max speed    : 4
Selected speed     : 4
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 655360 = 640 KB
 01 00 A0 00 00 00 00 01 00 00 00 00
 01 00 A1 00 00 00 00 00 00 00 00 00
 01 00 A2 00 00 00 00 00 02 00 00 00

Executing 'log sense' command on Bus 2 Target 0, Lun 0 timeout 100s
CDB:  4D 00 43 00 00 00 00 00 FF 00
/tmp/cdrecord: Input/output error. log sense: scsi sendcmd: no error
CDB:  4D 00 43 00 00 00 00 00 FF 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 100s

Executing 'log sense' command on Bus 2 Target 0, Lun 0 timeout 100s
CDB:  4D 00 71 00 00 00 00 00 FF 00
/tmp/cdrecord: Input/output error. log sense: scsi sendcmd: no error
CDB:  4D 00 71 00 00 00 00 00 FF 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 100s
Disk info: 00 20 10 01 01 01 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Disk info: 00 20 10 01 01 01 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Track 1 start 0
Current Secsize: 2048
Supported DVD (readable) structures: 01 04 11 C0 FF
Page 00 read        (40) len 2048
Page 01 read        (40) len 4
Page 02 read        (40) len 2048
Page 04 read        (40) len 2048
Page 05 read/write  (C0) len 4
Page 06 read        (40) len 20
Page 07 read        (40) len 24576
Category/Version	92
Disk size		0F
Disk structure		04
Recoding density	00
Manufacturer:		'MBIPG101'
Media type:		'W04'
Product revision	0
ADIP numbytes		57
Reference speed		35
Max speed		0
copyr prot type: 0
region mgt info: 0
rzone number:       1
border number:      1
damage:             0
reserved:           0 blank: 1 incremental: 0
nwa valid:          0
rzone start:        0
next wr addr:       0
free blocks:        2295104
blocking factor:    16
rzone size:         2295104
last recorded addr: 0
rzone number:       1
border number:      1
damage:             0
reserved:           0 blank: 1 incremental: 0
nwa valid:          0
rzone start:        0
next wr addr:       0
free blocks:        2295104
blocking factor:    16
rzone size:         2295104
last recorded addr: 0

    Capacity  Blklen/Sparesz.  Type
     2295104             2048  Unformated or Blank Media
     2295104                0  Reserved (0)
=================================
writing attempt on maiden media
=================================
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01.01a20 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PHILIPS '
Identifikation : 'DVD+-RW DVD8801 '
Revision       : '4D28'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+RW
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW (current)
Profile: DVD-RW sequential overwrite 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 655360 = 640 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data     1 MB        
Total size:        1 MB = 979 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 2294125
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds.   8 seconds.   7 seconds.   6 seconds.   5 seconds.   4 seconds.   3 seconds.   2 seconds.   1 seconds.   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0

Track 01:    0 of    1 MB written./tmp/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.003s timeout 100s
/tmp/cdrecord: A write error occured.
/tmp/cdrecord: Please properly read the error message above.

write track data: error after 0 bytes
Writing  time:    5.029s
Average write speed   0.3x.
Fixating...
Fixating time:    0.003s
/tmp/cdrecord: fifo had 32 puts and 1 gets.
/tmp/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
=================================
format on maiden media  ("format was not needed")
=================================
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01.01a20 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PHILIPS '
Identifikation : 'DVD+-RW DVD8801 '
Revision       : '4D28'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD+RW
Profile: DVD+R/DL 
Profile: DVD+R 
Profile: DVD+RW (current)
Profile: DVD-RW sequential overwrite 
Profile: DVD-RW restricted overwrite 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 655360 = 640 KB
Current Secsize: 2048
Format was not needed.
Starting to write CD/DVD at speed 4 in real force FORMAT mode for single session.
Last chance to quit, starting real write in 9 seconds.   8 seconds.   7 seconds.   6 seconds.   5 seconds.   4 seconds.   3 seconds.   2 seconds.   1 seconds.   0 seconds. Operation starts.
Formatting media
Formatting time:  142.920s
-- 
giulioo@pobox.com



Reply to: