Re: CDRECORD PROBLEM ?
Sasa Ostrouska <sasa.ostrouska@volja.net> wrote:
> Hello to everybody,
>
> I tried to burn a DVD and I got this error, can somebody tell me
> what is on ? Is a brocen media ?
>
>
> Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev= "0,0,0"
> gracetime=10 fs=4096k -v driveropts=burnfree speed=16 -dao -eject -pad
> -waiti tsize=2107292s -
>
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.25
> SCSI buffer size: 64512
> Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C)
> 1995-2004 Jörg Schilling
> Unlocked features: ProDVD Clone
> Limited features:
> This copy of cdrecord is licensed for:
> private/research/educational_non-commercial_use
> TOC Type: 1 = CD-ROM
> Waiting for data on stdin...
> Using libscg version 'schily-0.8'.
> Driveropts: 'burnfree'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'PIONEER '
> Identifikation : 'DVD-RW DVR-K12D'
> Revision : '1.00'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: DVD+R
> Profile: DVD+R (current)
> Profile: DVD+RW
> Profile: DVD-RW sequential overwrite
> Profile: DVD-RW restricted overwrite
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
> Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 1605632 = 1568 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 4115 MB padsize: 30 KB
> Total size: 4115 MB = 2107307 sectors
> Current Secsize: 2048
> Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 187797
> Starting to write CD/DVD at speed 2 in real SAO mode for single session.
>
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Starting new track at sector: 0
> cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 07 2A 54 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 13 00 02 0E 26 01 31 E6 08 01 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0
> Sense flags: Blk 1245186 (not valid)
> cmd finished after 2.012s timeout 100s
> cdrecord.prodvd: A write error occured.
> cdrecord.prodvd: Please properly read the error message above.
Caused either by incorrect kernel DMA setup or by a defective kernel.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: