CDRECORD PROBLEM ?
Hello to everybody,
I tried to burn a DVD and I got this error, can somebody tell me
what is on ? Is a brocen media ?
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev= "0,0,0"
gracetime=10 fs=4096k -v driveropts=burnfree speed=16 -dao -eject -pad
-waiti tsize=2107292s -
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C)
1995-2004 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-K12D'
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4115 MB padsize: 30 KB
Total size: 4115 MB = 2107307 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 187797
Starting to write CD/DVD at speed 2 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Starting new track at sector: 0
cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 07 2A 54 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 13 00 02 0E 26 01 31 E6 08 01 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0
Sense flags: Blk 1245186 (not valid)
cmd finished after 2.012s timeout 100s
cdrecord.prodvd: A write error occured.
cdrecord.prodvd: Please properly read the error message above.
write track data: error after 961716224 bytes
Writing time: 436.614s
Average write speed 7.1x.
Min drive buffer fill was 6%
Fixating...
Trouble closing the last session
cdrecord.prodvd: Input/output error. close track/session: scsi sendcmd:
no error
Fixating time: 2.828s
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 44 D6 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0xD6 (internal target failure) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.667s timeout 1000s
cdrecord.prodvd: Input/output error. close track/session: scsi sendcmd:
no error
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 44 D6 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x44 Qual 0xD6 (internal target failure) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1.667s timeout 1000s
cmd finished after 1.667s timeout 1000s
cdrecord.prodvd: fifo had 15212 puts and 15149 gets.
cdrecord.prodvd: fifo was 1463 times empty and 1102 times full, min fill
was 0%.
Regards
--
Sasa Ostrouska <sasa.ostrouska@volja.net>
Reply to: