LG GSA-4040B and dvdwrite

[Ole Jacob Taraldset <ojt@gexcon.com>]

I'm trying to get my LG GSA-4040B attached to a RedHat 8 box burn a iso doing 
"dvdrecord -v dev=0,0,0 -dao -dummy /iso/shrike-i386-disc1.iso", but nothing 
is written and I'm note sure what the error is. The disk is a DVD-R.

-Ole Jacob

dvdrtools v0.1.3
Portions (c) 2002 Red Hat, Inc.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4040B'
Revision       : 'A104'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1245184 = 1216 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  638 MB
Total size:     732 MB (72:35.41) = 326656 sectors
Lout start:     733 MB (72:37/31) = 326656 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 1326880 Blocks remaining: 1000224
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=1
BURN-Free is ON.
Sending CUE sheet...
Starting new track at sector: 1298438
Track 02:   0 of 638 MB written.dvdrecord: Input/output error. write_g1: scsi 
sendcmd: no error
CDB:  2A 00 00 13 D0 06 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0C 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching 
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 200s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0C 00 00 00 00 00 00
Writing  time:    5.040s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.006s
dvdrecord: fifo had 64 puts and 1 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.