Problems with cdrecord.prodvd
Hi there,
I wanted to write my first dvd with cdrecord.prodvd 2.01a12 through
xcdroast 0.98a14. My OS is MDK 9.1 and my dvd burner is a Pioneer DVD-RW
DVR-K1RA, which Jörg told me to be supported by cdrecord.prodvd.
I have used a Memorex DVD-RW 4.7Gb disc and xcdroast is not able to get
the ATIP info. I have tried to burn a track (231mb) with tao and sao and
I had no success.
The report is the following:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev= "0,0,0"
gracetime=10 fs=4096k -v driveropts=burnfree speed=16 -dao -eject -pad
-waiti tsize=118560s -
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C)
1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'DVD-RW DVR-K12RA'
Revision : '1.10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-RW sequential overwrite
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 231 MB padsize: 30 KB
Total size: 231 MB = 118575 sectors
Current Secsize: 2048
Total power on hours: 8878
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2179921
Starting to write CD/DVD at speed 1 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 03 07 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 FF FF FE 00 0E 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk -512 (not valid)
cmd finished after 0.006s timeout 100s
cdrecord.prodvd: A write error occured.
cdrecord.prodvd: Please properly read the error message above.
write track data: error after 1587200 bytes
Writing time: 97.278s
Average write speed 1.8x.
Fixating...
Fixating time: 0.005s
cdrecord.prodvd: fifo had 89 puts and 26 gets.
cdrecord.prodvd: fifo was 0 times empty and 5 times full, min fill was 89%.
I have tried to blank the dvd-rw, but I also got an error.
I have no problems with cd-r/rw burning. Could anyone help me with this.
Thanks,
Pablo
Reply to: