Re: Problems with cdrecord.prodvd
>From: Pablo Rodriguez <oinos@web.de>
>I wanted to write my first dvd with cdrecord.prodvd 2.01a12 through
>xcdroast 0.98a14. My OS is MDK 9.1 and my dvd burner is a Pioneer DVD-RW
>DVR-K1RA, which Jörg told me to be supported by cdrecord.prodvd.
>I have used a Memorex DVD-RW 4.7Gb disc and xcdroast is not able to get
>the ATIP info. I have tried to burn a track (231mb) with tao and sao and
>I had no success.
>The report is the following:
>Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORDPRODVD dev= "0,0,0"
>gracetime=10 fs=4096k -v driveropts=burnfree speed=16 -dao -eject -pad
>-waiti tsize=118560s -
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Linux sg driver version: 3.1.24
>Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C)
>1995-2003 Jörg Schilling
>Unlocked features: ProDVD Clone
>Limited features:
>This copy of cdrecord is licensed for:
>private/research/educational_non-commercial_use
>TOC Type: 1 = CD-ROM
>Waiting for data on stdin...
>Using libscg version 'schily-0.7'
>Driveropts: 'burnfree'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : 'PIONEER '
>Identifikation : 'DVD-RW DVR-K12RA'
>Revision : '1.10'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: DVD-RW sequential overwrite
>Profile: DVD+R
>Profile: DVD+RW
>Profile: DVD-RW sequential overwrite (current)
>Profile: DVD-RW restricted overwrite (current)
>Profile: DVD-R sequential recording (current)
>Profile: DVD-ROM
>Profile: CD-RW
>Profile: CD-R
>Profile: CD-ROM
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>Drive buf size : 1605632 = 1568 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: data 231 MB padsize: 30 KB
>Total size: 231 MB = 118575 sectors
>Current Secsize: 2048
>Total power on hours: 8878
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2179921
>Starting to write CD/DVD at speed 1 in real SAO mode for single session.
>Waiting for reader process to fill input buffer ...
>input buffer ready.
>BURN-Free is ON.
>Starting new track at sector: 0
>cdrecord.prodvd: Input/output error. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 03 07 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 71 00 03 FF FF FE 00 0E 00 00 00 00 0C 00 00 00
>Sense Key: 0x3 Medium Error, deferred error, Segment 0
>Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>Sense flags: Blk -512 (not valid)
>cmd finished after 0.006s timeout 100s
>cdrecord.prodvd: A write error occured.
>cdrecord.prodvd: Please properly read the error message above.
Start with cdrecord-ProDVD -atip on that media. Maybe it is a cheap
and bad media.
Also make sure that you get enough speed (DMA must be enabled).
It may be a wrong message from the drive....
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: