Problem getting my NEC ND-1300a to blank a DVCD+RW
Hi all,
I have serached the list archives for this particular problem, but I
seem to cannot find a solution to this.
I am using plain cdrecord-ProDVD 2.01a12 on my debian woody and I can
not convice my NEC drive to blank a written DVD+RW medium.
When I try the following command
Canot blank with non Ricoh based drive.
/usr/share/cdrecord-prodvd/cdrecord-ProDVD: Cannot blank disk, aborting.
all I get is:
Canot blank with non Ricoh based drive.
Cannot blank disk, aborting.
If I issue -force the drive seems to do something but in the end the
medium is not usable.
If I also add -vv to the comand the output is as follows:
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C)
1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
Using libscg transport code version 'schily-scsi-linux-sg.c-1.75'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+RW
Profile: DVD+R
Profile: DVD+RW (current)
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Drive current speed: 0
Drive default speed: 2
Drive max speed : 2
Selected speed : 2
Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
Track 1 start 0
01 00 A0 00 00 00 00 01 00 00 00 00
01 00 A1 00 00 00 00 00 00 00 00 00
01 00 A2 00 00 00 00 00 02 00 00 00
Current Secsize: 2048
Supported DVD (readable) structures: 00 01 04 05 FF
Page 00 read (40) len 2048
Page 01 read (40) len 4
Page 02 read (40) len 2048
Page 03 read (40) len 188
Page 04 read (40) len 2048
Page 05 read (40) len 4
Page 06 read (40) len 32768
Page 07 read (40) len 32768
Page 0C read (40) len 30720
Page 0D read (40) len 32768
Page 0E read (40) len 64
Page 0F read (40) len 18
Page 10 read (40) len 2048
Page 30 read (40) len 32768
Page C0 read (40) len 4
book type: DVD+RW, Version 2 (9.2)
disc size: 120mm (0)
minimum rate: Not specified (15)
number of layers:0
track path: Parallel Track Path (0)
layer type: illegal layer type (4)
linear density: 0.267 µm/bit (0)
track density: 0.74 µm/track (0)
phys start: 196608
phys end: 1994607
end layer 0: 0
bca: 0
phys size:... 1798000
Manufacturer: 'SENTINEL'
Media type: 'W01'
copyr prot type: 0
region mgt info: 0
cpm: 0
cgms: 0
rzone number: 1
border number: 1
damage: 0
reserved: 0 blank: 0 incremental: 0
nwa valid: 0
rzone start: 0
next wr addr: 0
free blocks: 0
blocking factor: 16
rzone size: 1798000
last recorded addr: 0
Executing 'log sense' command on Bus 0 Target 0, Lun 0 timeout 100s
CDB: 4D 00 43 00 00 00 00 00 FF 00
/usr/share/cdrecord-prodvd/cdrecord-ProDVD: Input/output error. log
sense: scsi sendcmd: no error
CDB: 4D 00 43 00 00 00 00 00 FF 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 100s
Executing 'log sense' command on Bus 0 Target 0, Lun 0 timeout 100s
CDB: 4D 00 71 00 00 00 00 00 FF 00
/usr/share/cdrecord-prodvd/cdrecord-ProDVD: Input/output error. log
sense: scsi sendcmd: no error
CDB: 4D 00 71 00 00 00 00 00 FF 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 100s
Disk info: 00 20 1E 01 01 01 01 01 FF 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00
Disk info: 00 20 1E 01 01 01 01 01 FF 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00
CD write parameter: 37 40 00 00 05 32 41 04 08 00 00 00 00 00 00 00 00
00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CD write parameter: 37 40 00 00 05 32 42 04 08 00 00 00 00 00 00 00 00
00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CD write parameter: 37 40 00 00 05 32 42 04 08 00 00 00 00 00 00 00 00
00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CD write parameter: 37 40 00 00 05 32 42 04 08 00 00 00 00 00 00 00 00
00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Starting to write CD/DVD at speed 0 in real BLANK mode for single session.
Does this error belong to the NEC drive or did I missed something?
Regards,
Stephan
--
Stephan Budach
Schrammstwiete 7a 22949 Ammersbek
Telefon: +49 40 60561525 Fax: +49 40 60559482
eMail: budy@stephanbudach.de
Reply to: