Re: bug mate-settings-daemon
Le 30/06/2016 23:49, hamster a écrit :
cd /home
mv /home/hamster /home/hamster.OLD
mkdir -p hamster
cp /etc/skel/.* /home/hamster
chown -R 1000:1000 hamster
Je vais essayer, mais la aussi je n'ai qu'une méthode pour savoir si ca
améliore ou pas : travailler sur l'ordi un certain temps.
Apres ces quelques manips j'ai redémarré l'ordi et j'ai eu un joli
bureau tout propre et tout vide (comme prévu). Ca a mis moins d'une
minute a planter a nouveau. Fichiers de log en piece jointe, sauf pour
tail -f .xsession-errors parce que le fichier fait plus de 5 Mo. Il
contiens a l'infini la ligne qu'on voit dans tail-n-xsession-errors.txt,
avec en plus intercalé entre toutes ces lignes de temps en temps cette
autre ligne :
(mate-panel:2200): dconf-CRITICAL **: unable to create file
'/run/user/1000/dconf/user': Permission non accordée. dconf will not
work properly.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2+deb8u2 (2016-06-25)
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7d37ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f7d3800-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0006fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 0.3 present.
[ 0.000000] DMI: Dell Inc. Latitude D510 /0N8719, BIOS A04 12/27/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f7d3 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[ 0.000000] BRK [0x0179e000, 0x0179ffff] PGTABLE
[ 0.000000] BRK [0x017a0000, 0x017a0fff] PGTABLE
[ 0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x363f4000-0x371f1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC9B0 000014 (v00 DELL )
[ 0.000000] ACPI: RSDT 0x000000003F7D3FD3 000040 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: FACP 0x000000003F7D4C00 000074 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: DSDT 0x000000003F7D5800 0033B3 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x000000003F7E4000 000040
[ 0.000000] ACPI: APIC 0x000000003F7D5400 000068 (v01 DELL D05 27D50C1B ASL 00000047)
[ 0.000000] ACPI: MCFG 0x000000003F7D53C0 00003E (v16 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: BOOT 0x000000003F7D4FC0 000028 (v01 DELL D05 27D50C1B ASL 00000061)
[ 0.000000] ACPI: SSDT 0x000000003F7D43E6 00023E (v01 PmRef Cpu0Ist 00003000 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D420E 0001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 0x000000003F7D4013 0001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 129MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x017a2000, 0x017a2fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f7d2fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7d2fff]
[ 0.000000] On node 0 totalpages: 259953
[ 0.000000] free_area_init_node: node 0, pgdat c165d200, node_mem_map f5c04020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222718 pages, LIFO batch:31
[ 0.000000] HighMem zone: 260 pages used for memmap
[ 0.000000] HighMem zone: 33237 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f75db000 s34752 r0 d22592 u57344
[ 0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258181
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=aed75f73-f52e-48ca-ace8-5782de2eb5c8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000375fe:0003f7d3)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008540K/1039812K available (4610K kernel code, 522K rwdata, 1452K rodata, 660K init, 460K bss, 31272K reserved, 132948K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc1671000 - 0xc1716000 ( 660 kB)
.data : 0xc1480d4c - 0xc166fbc0 (1979 kB)
.text : 0xc1000000 - 0xc1480d4c (4611 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1728.895 MHz processor
[ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.79 BogoMIPS (lpj=6915580)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004043] ACPI: Core revision 20140424
[ 0.012684] ACPI: All ACPI Tables successfully acquired
[ 0.012726] Security Framework initialized
[ 0.012747] AppArmor: AppArmor disabled by boot time parameter
[ 0.012749] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.012785] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.012789] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.013233] Initializing cgroup subsys memory
[ 0.013245] Initializing cgroup subsys devices
[ 0.013259] Initializing cgroup subsys freezer
[ 0.013265] Initializing cgroup subsys net_cls
[ 0.013275] Initializing cgroup subsys blkio
[ 0.013284] Initializing cgroup subsys perf_event
[ 0.013289] Initializing cgroup subsys net_prio
[ 0.013327] Disabled fast string operations
[ 0.013337] mce: CPU supports 5 MCE banks
[ 0.013349] CPU0: Thermal monitoring enabled (TM1)
[ 0.013365] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.024008] ftrace: allocating 20815 entries in 41 pages
[ 0.036123] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036578] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079274] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[ 0.080000] Performance Events: p6 PMU driver.
[ 0.080000] ... version: 0
[ 0.080000] ... bit width: 32
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 00000000ffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 0000000000000003
[ 0.080000] x86: Booted up 1 node, 1 CPUs
[ 0.080000] smpboot: Total of 1 processors activated (3457.79 BogoMIPS)
[ 0.080000] devtmpfs: initialized
[ 0.080093] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.082005] pinctrl core: initialized pinctrl subsystem
[ 0.082114] NET: Registered protocol family 16
[ 0.082293] cpuidle: using governor ladder
[ 0.082298] cpuidle: using governor menu
[ 0.082379] ACPI: bus type PCI registered
[ 0.082382] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.082503] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.082507] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.082509] PCI: Using MMCONFIG for extended config space
[ 0.082512] PCI: Using configuration type 1 for base access
[ 0.082528] dmi type 0xB1 record - unknown flag
[ 0.084153] ACPI: Added _OSI(Module Device)
[ 0.084156] ACPI: Added _OSI(Processor Device)
[ 0.084159] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084162] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.090785] ACPI: Interpreter enabled
[ 0.090801] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.090808] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.090828] ACPI: (supports S0 S3 S4 S5)
[ 0.090830] ACPI: Using IOAPIC for interrupt routing
[ 0.090870] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.107585] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[ 0.111956] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
[ 0.120902] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.120910] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.120918] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.137483] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.137488] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.137491] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.137495] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.137498] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[ 0.137502] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[ 0.137505] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[ 0.137509] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[ 0.137512] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[ 0.137516] PCI: root bus 00: using default resources
[ 0.137756] PCI host bridge to bus 0000:00
[ 0.137763] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.137767] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.137770] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.137782] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.137926] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.137938] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
[ 0.137945] pci 0000:00:02.0: reg 0x14: [io 0xec38-0xec3f]
[ 0.137952] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.137959] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
[ 0.138090] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.138100] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
[ 0.138282] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.138336] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[ 0.138437] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.138513] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.138567] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[ 0.138663] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.138740] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.138794] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[ 0.138892] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.138968] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.139022] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[ 0.139118] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.139207] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.139231] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.139332] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.139410] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.139490] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.139613] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.139695] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.139716] pci 0000:00:1e.2: reg 0x10: [io 0xed00-0xedff]
[ 0.139728] pci 0000:00:1e.2: reg 0x14: [io 0xec40-0xec7f]
[ 0.139741] pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
[ 0.139754] pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
[ 0.139815] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.139950] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.140060] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.140070] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.140077] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.140082] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.140206] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.140227] pci 0000:00:1f.2: reg 0x10: [io 0x01f0-0x01f7]
[ 0.140240] pci 0000:00:1f.2: reg 0x14: [io 0x03f4-0x03f7]
[ 0.140252] pci 0000:00:1f.2: reg 0x18: [io 0x0170-0x0177]
[ 0.140264] pci 0000:00:1f.2: reg 0x1c: [io 0x0374-0x0377]
[ 0.140277] pci 0000:00:1f.2: reg 0x20: [io 0xbfa0-0xbfaf]
[ 0.140303] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.140306] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.140309] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.140312] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.140344] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140582] pci 0000:02:00.0: [14e4:170c] type 00 class 0x020000
[ 0.140605] pci 0000:02:00.0: reg 0x10: [mem 0xdfdfa000-0xdfdfbfff]
[ 0.140698] pci 0000:02:00.0: supports D1 D2
[ 0.140701] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140804] pci 0000:02:01.0: [104c:8036] type 02 class 0x060700
[ 0.140828] pci 0000:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.140870] pci 0000:02:01.0: supports D1 D2
[ 0.140873] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140985] pci 0000:02:01.2: [104c:8037] type 00 class 0x0c0010
[ 0.141011] pci 0000:02:01.2: reg 0x10: [mem 0xdfdf8800-0xdfdf8fff]
[ 0.141026] pci 0000:02:01.2: reg 0x14: [mem 0xdfdfc000-0xdfdfffff]
[ 0.141128] pci 0000:02:01.2: supports D1 D2
[ 0.141131] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.141248] pci 0000:02:03.0: [8086:4220] type 00 class 0x028000
[ 0.141274] pci 0000:02:03.0: reg 0x10: [mem 0xdfdf9000-0xdfdf9fff]
[ 0.141388] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.141527] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.141537] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.141546] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.141549] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.141628] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.141635] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[ 0.141639] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.141646] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.141651] pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
[ 0.141661] pci_bus 0000:00: on NUMA node 0
[ 0.145449] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.145581] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.145711] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.145840] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.145952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.146068] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.146183] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.147514] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.147717] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.147721] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.147726] vgaarb: loaded
[ 0.147728] vgaarb: bridge control possible 0000:00:02.0
[ 0.147818] PCI: Using ACPI for IRQ routing
[ 0.158400] PCI: pci_cache_line_size set to 64 bytes
[ 0.158455] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.158459] e820: reserve RAM buffer [mem 0x3f7d3800-0x3fffffff]
[ 0.158837] hpet clockevent registered
[ 0.158842] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.158849] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.158855] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.160029] Switched to clocksource hpet
[ 0.170356] pnp: PnP ACPI init
[ 0.170385] ACPI: bus type PNP registered
[ 0.180996] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.181001] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.181005] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.181010] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.181014] system 00:00: [mem 0x00100000-0x3f7d37ff] could not be reserved
[ 0.181018] system 00:00: [mem 0x3f7d3800-0x3f7fffff] has been reserved
[ 0.181022] system 00:00: [mem 0x3f800000-0x3fffffff] has been reserved
[ 0.181026] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
[ 0.181031] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.181035] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.181039] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.181043] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.181050] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.181054] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.181058] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.181062] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[ 0.181066] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.181070] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.181076] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.181124] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.181128] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.181179] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.181184] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.181220] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.181225] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.181229] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.181281] system 00:02: [io 0xf400-0xf4fe] has been reserved
[ 0.181286] system 00:02: [io 0x1080-0x10bf] has been reserved
[ 0.181290] system 00:02: [io 0x10c0-0x10df] has been reserved
[ 0.181294] system 00:02: [io 0x10e0-0x10ff] could not be reserved
[ 0.181298] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.181379] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.181448] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.181515] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.181598] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.181603] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.181607] system 00:06: [io 0x0920-0x092f] has been reserved
[ 0.181610] system 00:06: [io 0x0930-0x093f] has been reserved
[ 0.181614] system 00:06: [io 0x0940-0x097f] has been reserved
[ 0.181619] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.186916] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.195487] pnp 00:08: [dma 1]
[ 0.195625] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.197302] pnp: PnP ACPI: found 9 devices
[ 0.197305] ACPI: bus type PNP unregistered
[ 0.197314] PnPBIOS: Disabled by ACPI PNP
[ 0.234922] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.234927] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.234933] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.234944] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.234956] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.234965] pci 0000:02:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.234968] pci 0000:02:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.234972] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.234975] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.234982] pci 0000:02:01.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
[ 0.234991] pci 0000:02:01.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[ 0.234996] pci 0000:02:01.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.235000] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.235004] pci 0000:02:01.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.235008] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
[ 0.235011] pci 0000:02:01.0: bridge window [io 0x2000-0x20ff]
[ 0.235018] pci 0000:02:01.0: bridge window [io 0x2400-0x24ff]
[ 0.235025] pci 0000:02:01.0: bridge window [mem 0x44000000-0x47ffffff pref]
[ 0.235032] pci 0000:02:01.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.235038] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.235043] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.235050] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.235063] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.235066] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.235070] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.235073] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.235077] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.235080] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.235084] pci_bus 0000:03: resource 0 [io 0x2000-0x20ff]
[ 0.235087] pci_bus 0000:03: resource 1 [io 0x2400-0x24ff]
[ 0.235090] pci_bus 0000:03: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.235094] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.235141] NET: Registered protocol family 2
[ 0.235530] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.235564] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.235622] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.235665] TCP: reno registered
[ 0.235671] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235686] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235771] NET: Registered protocol family 1
[ 0.235800] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.237650] PCI: CLS 64 bytes, default 64
[ 0.237740] Unpacking initramfs...
[ 0.722256] Freeing initrd memory: 14328K (f63f4000 - f71f2000)
[ 0.722388] Simple Boot Flag at 0x79 set to 0x1
[ 0.722567] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.722674] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.723138] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.723209] audit: initializing netlink subsys (disabled)
[ 0.723251] audit: type=2000 audit(1467326960.720:1): initialized
[ 0.723794] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.723821] zbud: loaded
[ 0.723917] VFS: Disk quotas dquot_6.5.2
[ 0.723939] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.724076] msgmni has been set to 1738
[ 0.724547] alg: No test for stdrng (krng)
[ 0.724579] bounce: pool size: 64 pages
[ 0.724597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.724658] io scheduler noop registered
[ 0.724663] io scheduler deadline registered
[ 0.724712] io scheduler cfq registered (default)
[ 0.724874] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.724908] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.724951] intel_idle: does not run on family 6 model 13
[ 0.725014] GHES: HEST is not enabled!
[ 0.725052] isapnp: Scanning for PnP cards...
[ 1.078871] isapnp: No Plug & Play device found
[ 1.078988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.099591] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.100126] Linux agpgart interface v0.103
[ 1.100262] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 1.100284] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.101163] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.101327] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.101577] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.106674] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.106683] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.106886] mousedev: PS/2 mouse device common for all mice
[ 1.107135] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.107171] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.107193] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.108051] TCP: cubic registered
[ 1.108075] NET: Registered protocol family 10
[ 1.108404] mip6: Mobile IPv6
[ 1.108410] NET: Registered protocol family 17
[ 1.108418] mpls_gso: MPLS GSO support
[ 1.108632] Using IPI No-Shortcut mode
[ 1.108805] registered taskstats version 1
[ 1.109255] rtc_cmos 00:05: setting system clock to 2016-06-30 22:49:21 UTC (1467326961)
[ 1.109344] PM: Hibernation image not present or could not be loaded.
[ 1.109688] Freeing unused kernel memory: 660K (c1671000 - c1716000)
[ 1.109736] Write protecting the kernel text: 4612k
[ 1.109786] Write protecting the kernel read-only data: 1456k
[ 1.109787] NX-protecting the kernel data: 3580k
[ 1.111954] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.124170] systemd-udevd[55]: starting version 215
[ 1.124555] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.156239] ACPI: bus type USB registered
[ 1.156292] usbcore: registered new interface driver usbfs
[ 1.156311] usbcore: registered new interface driver hub
[ 1.161201] usbcore: registered new device driver usb
[ 1.161986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.162189] ehci-pci: EHCI PCI platform driver
[ 1.162476] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.162488] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.162506] ehci-pci 0000:00:1d.7: debug port 1
[ 1.166421] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.167006] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.167526] ehci-pci 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 1.176028] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.176150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.176154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.176158] usb usb1: Product: EHCI Host Controller
[ 1.176161] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.176164] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.176401] hub 1-0:1.0: USB hub found
[ 1.176415] hub 1-0:1.0: 8 ports detected
[ 1.177274] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.177285] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.177295] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.177319] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 1.177399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.177402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.177405] usb usb2: Product: UHCI Host Controller
[ 1.177408] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.177411] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.177590] hub 2-0:1.0: USB hub found
[ 1.177601] hub 2-0:1.0: 2 ports detected
[ 1.177940] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.177948] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.177956] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.177997] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 1.178066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.178070] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178073] usb usb3: Product: UHCI Host Controller
[ 1.178076] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.178079] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.178254] hub 3-0:1.0: USB hub found
[ 1.178263] hub 3-0:1.0: 2 ports detected
[ 1.178603] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.178614] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.178623] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.178658] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 1.178718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.178722] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178725] usb usb4: Product: UHCI Host Controller
[ 1.178728] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.178731] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.178905] hub 4-0:1.0: USB hub found
[ 1.178915] hub 4-0:1.0: 2 ports detected
[ 1.179257] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.179265] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.179274] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.179308] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 1.179367] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.179371] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.179374] usb usb5: Product: UHCI Host Controller
[ 1.179377] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.179380] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.179559] hub 5-0:1.0: USB hub found
[ 1.179569] hub 5-0:1.0: 2 ports detected
[ 1.193334] SCSI subsystem initialized
[ 1.205311] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.205317] ACPI: Thermal Zone [THM] (48 C)
[ 1.212165] libata version 3.00 loaded.
[ 1.213329] ahci 0000:00:1f.2: version 3.0
[ 1.213536] ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
[ 1.216080] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
[ 1.216089] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.216096] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.216103] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.216699] ata_piix 0000:00:1f.2: version 2.13
[ 1.216882] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.256152] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.256198] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.276864] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:14:22:d7:c4:e6
[ 1.312061] firewire_ohci 0000:02:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.373347] scsi0 : ata_piix
[ 1.373536] scsi1 : ata_piix
[ 1.373620] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 1.373623] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 1.488022] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1.536681] ata1.00: ATA-6: ST960822A, 8.03, max UDMA/100
[ 1.536686] ata1.00: 117210240 sectors, multi 8: LBA48
[ 1.536690] ata1.00: applying bridge limits
[ 1.552576] ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462C, DE01, max UDMA/33
[ 1.552997] ata1.00: configured for UDMA/100
[ 1.553137] scsi 0:0:0:0: Direct-Access ATA ST960822A 8.03 PQ: 0 ANSI: 5
[ 1.584237] ata2.00: configured for UDMA/33
[ 1.585063] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5
[ 1.598713] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 1.598794] sd 0:0:0:0: [sda] Write Protect is off
[ 1.598798] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.598828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.605073] sr0: scsi3-mmc drive: 10x/24x writer cd/rw xa/form2 cdda tray
[ 1.605077] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.605257] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.606598] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.606844] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.621702] usb 1-8: New USB device found, idVendor=05e3, idProduct=0605
[ 1.621707] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.621710] usb 1-8: Product: USB2.0 Hub
[ 1.622137] hub 1-8:1.0: USB hub found
[ 1.622449] hub 1-8:1.0: 4 ports detected
[ 1.631292] sda: sda1 sda2 sda3 sda4
[ 1.632018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.720022] tsc: Refined TSC clocksource calibration: 1728.999 MHz
[ 1.812177] firewire_core 0000:02:01.2: created device fw0: GUID 394fc00008aa9050, S400
[ 1.892026] usb 1-8.1: new low-speed USB device number 3 using ehci-pci
[ 1.988578] usb 1-8.1: New USB device found, idVendor=046d, idProduct=c016
[ 1.988584] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.988587] usb 1-8.1: Product: Optical USB Mouse
[ 1.988590] usb 1-8.1: Manufacturer: Logitech
[ 1.991241] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.995448] usbcore: registered new interface driver usbhid
[ 1.995451] usbhid: USB HID core driver
[ 1.997535] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C016.0001/input/input4
[ 1.997730] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-8.1/input0
[ 2.060019] usb 1-8.4: new low-speed USB device number 4 using ehci-pci
[ 2.157831] usb 1-8.4: New USB device found, idVendor=0e8f, idProduct=0020
[ 2.157851] usb 1-8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.157855] usb 1-8.4: Product: PS2toUSB Adapter
[ 2.157858] usb 1-8.4: Manufacturer: GASIA
[ 2.163223] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.0/0003:0E8F:0020.0002/input/input5
[ 2.163343] hid-generic 0003:0E8F:0020.0002: input,hidraw1: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input0
[ 2.173115] input: GASIA PS2toUSB Adapter as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.4/1-8.4:1.1/0003:0E8F:0020.0003/input/input6
[ 2.173304] hid-generic 0003:0E8F:0020.0003: input,hidraw2: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-0000:00:1d.7-8.4/input1
[ 2.192748] PM: Starting manual resume from disk
[ 2.192756] PM: Hibernation image partition 8:1 present
[ 2.192758] PM: Looking for hibernation image.
[ 2.219060] PM: Image not found (code -22)
[ 2.219063] PM: Hibernation image not present or could not be loaded.
[ 2.232153] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input3
[ 2.251322] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 2.433742] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.720079] Switched to clocksource tsc
[ 3.729923] random: nonblocking pool is initialized
[ 5.481386] lp: driver loaded but no devices found
[ 5.505174] ppdev: user-space parallel port driver
[ 5.525970] parport_pc 00:08: reported by Plug and Play ACPI
[ 5.526040] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.620146] lp0: using parport0 (interrupt-driven).
[ 5.760912] fuse init (API version 7.23)
[ 5.970197] systemd-udevd[155]: starting version 215
[ 7.554580] tsc: Marking TSC unstable due to TSC halts in idle
[ 7.554603] ACPI: acpi_idle registered with cpuidle
[ 7.560033] Switched to clocksource hpet
[ 7.700827] ACPI: AC Adapter [AC] (on-line)
[ 7.794369] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 7.794927] ACPI: Lid Switch [LID]
[ 7.795014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[ 7.795020] ACPI: Power Button [PBTN]
[ 7.795099] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input9
[ 7.795103] ACPI: Sleep Button [SBTN]
[ 7.829207] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 7.829564] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input10
[ 7.829608] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 7.890140] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.942567] NET: Registered protocol family 23
[ 8.095912] intel_rng: FWH not detected
[ 8.101034] ACPI: Battery Slot [BAT0] (battery present)
[ 8.101106] ACPI: Battery Slot [BAT1] (battery absent)
[ 8.347086] [drm] Initialized drm 1.1.0 20060810
[ 8.781136] yenta_cardbus 0000:02:01.0: enabling device (0000 -> 0003)
[ 8.781374] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01af]
[ 8.781405] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 8.781412] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 8.781423] yenta_cardbus 0000:02:01.0: TI: mfunc 0x01001022, devctl 0x64
[ 8.909551] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 8.918940] lib80211: common routines for IEEE802.11 drivers
[ 8.918944] lib80211_crypt: registered algorithm 'NULL'
[ 8.986375] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.012728] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c78, PCI irq 19
[ 9.012740] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 9.012749] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 9.012767] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 9.012776] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
[ 9.014151] excluding 0x2000-0x20ff 0x2400-0x24ff
[ 9.022964] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdfd00000-0xdfdfffff]
[ 9.022970] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdfd00000-0xdfdfffff:
[ 9.022988] excluding 0xdfdf0000-0xdfdfffff
[ 9.038757] cfg80211: Calling CRDA to update world regulatory domain
[ 9.058503] libipw: 802.11 data/management/control stack, git-1.1.13
[ 9.058508] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 9.078306] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 9.078311] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 9.078583] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 9.110933] ipw2200 0000:02:03.0: firmware: failed to load ipw2200-bss.fw (-2)
[ 9.110988] ipw2200 0000:02:03.0: Direct firmware load failed with error -2
[ 9.110991] ipw2200 0000:02:03.0: Falling back to user helper
[ 9.219759] iTCO_vendor_support: vendor-support=0
[ 9.264811] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.264893] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 9.265399] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.359105] ipw2200: Unable to load firmware: -12
[ 9.359482] ipw2200: probe of 0000:02:03.0 failed with error -5
[ 9.466575] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 9.467640] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 9.468860] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 9.469257] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 9.469646] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 9.470268] clean.
[ 9.470306] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 9.471002] clean.
[ 9.471045] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 9.471056] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xf0000-0xfffff
[ 9.471127] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 9.471168] clean.
[ 9.471205] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 9.471245] clean.
[ 9.471282] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 9.471997] clean.
[ 9.584045] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 55224 usecs (2661 samples)
[ 9.584052] snd_intel8x0 0000:00:1e.2: clocking to 48000
[ 9.586237] [drm] Memory usable by graphics device = 256M
[ 9.586242] [drm] Replacing VGA console driver
[ 9.587041] Console: switching to colour dummy device 80x25
[ 9.590600] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.590606] [drm] Driver supports precise vblank timestamp query.
[ 9.590722] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.010686] [drm] initialized overlay support
[ 10.285535] fbcon: inteldrmfb (fb0) is primary device
[ 10.516168] cfg80211: World regulatory domain updated:
[ 10.516173] cfg80211: DFS Master region: unset
[ 10.516174] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.516179] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.516183] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.516187] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.516192] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.516198] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.516202] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.516206] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.516210] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.563079] Console: switching to colour frame buffer device 128x48
[ 11.567839] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 11.567842] i915 0000:00:02.0: registered panic notifier
[ 11.567861] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.334080] Adding 1023996k swap on /dev/sda1. Priority:-1 extents:1 across:1023996k FS
[ 17.450388] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 17.538327] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 19.058013] RPC: Registered named UNIX socket transport module.
[ 19.058023] RPC: Registered udp transport module.
[ 19.058027] RPC: Registered tcp transport module.
[ 19.058032] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.095644] FS-Cache: Loaded
[ 19.143761] FS-Cache: Netfs 'nfs' registered for caching
[ 19.206187] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 35.266532] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 38.816198] b44 ssb0:0 eth0: Link is up at 100 Mbps, full duplex
[ 38.816204] b44 ssb0:0 eth0: Flow control is off for TX and off for RX
[ 38.816300] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.829114] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 198.990757] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 199.174909] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 217.930267] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 217.968674] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jul 1 00:50:11 feu org.a11y.Bus[1715]: Successfully activated service 'org.a11y.atspi.Registry'
Jul 1 00:50:11 feu org.a11y.atspi.Registry[1721]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jul 1 00:50:25 feu org.a11y.Bus[1766]: Activating service name='org.a11y.atspi.Registry'
Jul 1 00:50:25 feu org.a11y.Bus[1766]: Successfully activated service 'org.a11y.atspi.Registry'
Jul 1 00:50:25 feu org.a11y.atspi.Registry[1823]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jul 1 00:50:29 feu org.gtk.Private.AfcVolumeMonitor[1766]: Volume monitor alive
Jul 1 00:52:39 feu kernel: [ 198.990757] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jul 1 00:52:39 feu kernel: [ 199.174909] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jul 1 00:52:58 feu kernel: [ 217.930267] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jul 1 00:52:58 feu kernel: [ 217.968674] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
(caja:1800): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(caja:1800): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(caja:1800): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(caja:1800): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
(caja:1800): dconf-CRITICAL **: unable to create file '/run/user/1000/dconf/user': Permission non accordée. dconf will not work properly.
Reply to: