HELP: can't access serial port???
hello,
i am still trying to get my Xircom CEM-28 pcmica-card modem to work, without
success at the moment, and the problem is really strange:
cat /var/run/stab
Socket 0: Xircom CEM28 Ethernet/Modem
0 network xirc2ps_cs 0 eth0
0 serial serial_cs 0 ttyS3 4 67
so the pcmcia controller recognized the card and the serial part of it...
lsmod gives (taking only pcmcia modules)
serial_cs 3836 0 (unused)
xirc2ps_cs 11288 1
ds 6144 4 [serial_cs xirc2ps_cs]
i82365 22456 2
pcmcia_core 41808 0 [serial_cs xirc2ps_cs ds i82365]
what bothers me is the unused flage behind the serial_cs module...
nevertheless:
setserial /dev/ttyS3
/dev/ttyS3, UART: 16450, Port: 0x02e8, IRQ: 7
which seems correct, if i take the card out it reverts to
setserial /dev/ttyS3
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 7
now i wanted to get connection to the modem:
kermit
C-Kermit 7.0.195 Beta.04, 30 Jan 1999, for Linux
Copyright (C) 1985, 1999,
Trustees of Columbia University in the City of New York.
Default file-transfer mode is AUTOMATIC
Type ? or HELP for help.
(/etc/pcmcia/) C-Kermit>set line /dev/ttyS0
(/etc/pcmcia/) C-Kermit>set line /dev/ttyS1
(/etc/pcmcia/) C-Kermit>set line /dev/ttyS2
/dev/ttyS2 is not a terminal device
Sorry, can't open connection: /dev/ttyS2
(/etc/pcmcia/) C-Kermit>set line /dev/ttyS3
/dev/ttyS3 is not a terminal device
Sorry, can't open connection: /dev/ttyS3
that there's nothing behind ttyS2 is normal, but ttyS3 should now work??? how
can it come that setserial see's the port but not kermit??
BTW is there a way to tell the pcmcia-card to use a specific ttyS* ? e.g.
setting it on ttyS2 instead of ttyS3?
but more important, how do i get that f*****g modem to work????
one more precision laptop is running debian-slink kernel 2.2.7 and
pcmcia-cs-3.0.8
--
ciao bboett
==============================================================
bboett@earthling.net
http://erm6.u-strasbg.fr/~bboett
===============================================================
the total amount of intelligence on earth is constant.
human population is growing....
Reply to: