Re: network printer problems
Subject: network printer problems
Date: Mon, May 03, 1999 at 02:17:41PM -0500
In reply to:Marc Mongeon
I am not, by any means a printer guru, but. I installed magicfilter
and the printcap I made using it, allows me to do:
lpr hellow.ps
No sweat, no strain.
HTH
Quoting Marc Mongeon(mongeon@bankoe.com):
> I am having a heck of a time setting up a "virtual" postscript
> printer. I am trying:
>
> $ cat hellow.ps | /etc/filter.ps | lpr -Praw
>
> where:
>
> ----- Begin hellow.ps -----
> %!
> /Helvetica findfont 72 scalefont setfont
> 72 72 moveto
> (Hello, world!) show
> showpage
>
> ----- Begin filter.ps -----
> #!/bin/sh
> /usr/bin/gs -q -dSAFER -sDEVICE=laserjet -dNOPAUSE -sOutputFile=- -
>
> ----- Begin printcap -----
> raw:\
> :lp=:\
> :rm=###.###.###.###:\
> :rp=LPT1_PASSTHRU:\
> :sd=/var/spool/lpd/service_ps:\
> :mx#0:\
> :sh:
>
>
> A blank sheet is spit out when the command is executed. The printer
> is an Okidata OL830 Plus, set to emulate the HP LaserJet Series II.
> The print server is an Intel NetportExpress 10/100. I can print plain
> text fine (echo hello | /etc/filter.pcl | lpr -Praw), where:
>
> ----- Begin filter.pcl -----
> #!/bin/sh
> # This is a simple filter for PCL language printers, i.e., most
> # HP DeskJet printers (see /etc/printcap).
>
> # reset the printer to its defaults
> echo -ne \\033\E
>
> # to avoid stair-stepping, convert "LF" to "CR+LF"
> echo -ne \\033\&k2G
>
> # print text
> cat
>
> # form feed
> echo -ne \\f
>
> # reset the printer on exit
> echo -ne \\033\E
> ----- End -----
>
>
> I understand that my final printer setup will not use a "raw" printer,
> but will have the appropriate filter specified as "if=" in the printcap
> entry-- I am only using this setup for debugging. I've tried different
> Postscript input, several different HP *jet device types, etc.
>
> Do I need to pass gs some additional switches to get the PCL output
> right? Is the Postscript input somehow flawed? I have spent a couple
> of days on this now, and am at my wit's end.
>
> Your help is appreciated.
>
> Marc Mongeon
>
> P.S. Here's some pertinent package information:
>
> Package: gs
> Version: 5.10-1
>
> Package: lpr
> Version: 1:0.33-3
>
> Package: gsfonts
> Version: 5.10a-1
>
> Package: gsfonts-other
> Version: 5.10-1
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
--
Old programmers never die. They just branch to a new address.
_______________________________________________________
Wayne T. Topa <wtopa@mindspring.com>
Reply to: