[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Alsa

Non ho compilato il kernel, ho installato la vertione
ufficiale della Debian.
alsaconf mi restituisce il seguente output.
All'avvio:
Unloading ALSA sound driver modules: snd-atiixp
snd-ac97-codec snd-pcm-oss snd-mixer-oss snd-pcm
snd-timer snd-page-alloc.
Building card database...

La rilevazione hardware:
atiixp ATI Technologies Inc IXP150 AC'97 Audio
Controller

Dopo la conferma:
unning update-modules...
Loading driver...
Setting default volumes...
Saving the mixer setup used for this in
/var/lib/alsa/asound.state.
/usr/sbin/alsactl: save_state:1194: No soundcards
found...


====================================================
 Now ALSA is ready to use.
 For adjustment of volumes, use your favorite mixer.

 Have a lot of fun!


Questo è quanto esegue alsaconf
Di seguito l'output di dmseg

Linux version 2.6.8-2-686-smp
(horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5
(Debian 1:3.3.5-12)) #1 SMP Thu May 19 17:27:55 JST
2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800
(usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000
(reserved)
 BIOS-e820: 0000000000100000 - 000000001ff70000
(usable)
 BIOS-e820: 000000001ff70000 - 000000001ff77000 (ACPI
data)
 BIOS-e820: 000000001ff77000 - 000000001ff80000 (ACPI
NVS)
 BIOS-e820: 000000001ff80000 - 0000000020000000
(reserved)
 BIOS-e820: 000000002ff80000 - 0000000030000000
(reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000
(reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000f60e0
On node 0 totalpages: 130928
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126832 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD                                
    ) @ 0x000f61e0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP
0x00000000) @ 0x1ff724f4
ACPI: FADT (v001 ATI    Wistron  0x06040000 ATI 
0x000f4240) @ 0x1ff76f24
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP
0x00000000) @ 0x1ff76f98
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL
0x20030224) @ 0x1ff72524
ACPI: DSDT (v001    ATI    SB200 0x06040000 MSFT
0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000]
gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000,
GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high
edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low
level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda7 ro 
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 3201.019 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
Memory: 510272k/523712k available (1663k kernel code,
12688k reserved, 768k data, 168k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay loop... 6356.99 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096
bytes)
CPU: After generic identify, caps: bfebfbff 00000000
00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps:        bfebfbff 00000000
00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
per-CPU timeslice cutoff: 1462.39 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6389.76 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000
00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps:        bfebfbff 00000000
00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Total of 2 processors activated (12746.75 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19,
2-20, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3199.0691 MHz.
..... host bus clock speed is 199.0980 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0:  online
 domain 0: span 03
  groups: 01 02
  domain 1: span 03
   groups: 03
CPU1:  online
 domain 0: span 03
  groups: 02 01
  domain 1: span 03
   groups: 03
checking if image is initramfs...it isn't (ungzip
failed); looks like an initrd
Freeing initrd memory: 4624k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd778, last
bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11)
*0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11)
*0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11)
*0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11)
*0, disabled.
ACPI: Embedded Controller [EC0] (gpe 3)
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at
0xc00f6220
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xae3b,
dseg 0x400
pnp: 00:00: ioport range 0x1080-0x1080 has been
reserved
pnp: 00:09: ioport range 0xf40-0xf41 has been reserved
pnp: 00:0a: ioport range 0xf44-0xf45 has been reserved
pnp: 00:0d: ioport range 0x40b-0x40b has been reserved
pnp: 00:0d: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0xc00-0xc01 has been reserved
pnp: 00:0d: ioport range 0xc14-0xc14 has been reserved
pnp: 00:0d: ioport range 0xc50-0xc51 has been reserved
pnp: 00:0d: ioport range 0xc52-0xc52 has been reserved
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by
driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 19 (level,
low) -> IRQ 177
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 19 (level,
low) -> IRQ 177
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 19 (level,
low) -> IRQ 177
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 16 (level,
low) -> IRQ 185
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 17 (level,
low) -> IRQ 193
ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 17 (level,
low) -> IRQ 193
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 19 (level,
low) -> IRQ 177
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 16 (level,
low) -> IRQ 185
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level,
low) -> IRQ 185
ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 16 (level,
low) -> IRQ 185
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 18 (level,
low) -> IRQ 201
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 16 (level,
low) -> IRQ 185
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 02000000
.......     : arbitration: 02
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    0    0   0   0    1    1    71
 0a 003 03  0    0    0   0   0    1    1    79
 0b 003 03  0    0    0   0   0    1    1    81
 0c 003 03  0    0    0   0   0    1    1    89
 0d 003 03  0    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 003 03  1    1    0   1   0    1    1    B9
 11 003 03  1    1    0   1   0    1    1    C1
 12 003 03  1    1    0   1   0    1    1    C9
 13 003 03  1    1    0   1   0    1    1    B1
 14 000 00  1    0    0   0   0    0    0    00
 15 003 03  0    1    0   1   0    1    1    A9
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ185 -> 0:16
IRQ193 -> 0:17
IRQ201 -> 0:18
IRQ177 -> 0:19
IRQ169 -> 0:21
.................................... done.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports,
IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 17 (level,
low) -> IRQ 193
RAMDISK driver initialized: 16 RAM disks of 8192K size
1024 blocksize
i8042.c: Detected active multiplexing controller, rev
1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind
32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4624 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 16 (level,
low) -> IRQ 185
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8070-0x8077, BIOS settings:
hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8078-0x807f, BIOS settings:
hdc:DMA, hdd:pio
hda: IC25N060ATMR04-0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache,
CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6
p7 p8 p9 >
hdc: PIONEER DVD-RW DVR-K13RA, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
VFS: Can't find ext3 filesystem on dev hda7.
VFS: Can't find ext2 filesystem on dev hda7.
ReiserFS: hda7: found reiserfs format "3.6" with
standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size
8192, journal first block 18, max trans len 1024, max
batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
Adding 297160k swap on /dev/hda6.  Priority:-1
extents:1
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB
Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Synaptics Touchpad, model: 1
 Firmware: 5.8
 180 degree mounted touchpad
 Sensor: 18
 new absolute packet format
 Touchpad has extended capability bits
 -> 4 multi-buttons, i.e. besides standard buttons
 -> multifinger detection
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ts: Compaq touchscreen protocol output
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ReiserFS: hda8: found reiserfs format "3.6" with
standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size
8192, journal first block 18, max trans len 1024, max
batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
ReiserFS: hda9: found reiserfs format "3.6" with
standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size
8192, journal first block 18, max trans len 1024, max
batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
ohci1394: $Rev: 1223 $ Ben Collins
<bcollins@debian.org>
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 16 (level,
low) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] 
MMIO=[d8206000-d82067ff]  Max Packet=[2048]
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 0000:02:04.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level,
low) -> IRQ 185
Yenta: CardBus bridge found at 0000:02:04.0
[1025:0052]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x01001022,
devctl 0x64
Yenta: ISA IRQ mask 0x0eb8, PCI irq 185
Socket status: 30000006
PCI: Enabling device 0000:02:04.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 16 (level,
low) -> IRQ 185
Yenta: CardBus bridge found at 0000:02:04.1
[1025:0052]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.1, mfunc 0x01001022,
devctl 0x64
Yenta: ISA IRQ mask 0x0eb8, PCI irq 185
Socket status: 30000006
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 16 (level,
low) -> IRQ 185
eth0: RealTek RTL8139 at 0xa000, 00:0a:e4:58:3b:1c,
IRQ 185
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ieee1394: Host added: ID:BUS[0-00:1023] 
GUID[241027ed000ae404]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet
(fw-host0)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP9100/M chipset
agpgart: Maximum main memory to use for agp memory:
439M
agpgart: AGP aperture is 64M @ 0xdc000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
pciehp: PCI Express Hot Plug Controller Driver
version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 19 (level,
low) -> IRQ 177
ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI
Technologies Inc)
ohci_hcd 0000:00:13.0: irq 177, pci mem e0c84000
ohci_hcd 0000:00:13.0: new USB bus registered,
assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 19 (level,
low) -> IRQ 177
ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI
Technologies Inc)
ohci_hcd 0000:00:13.1: irq 177, pci mem e0c86000
ohci_hcd 0000:00:13.1: new USB bus registered,
assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 2-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical
Mouse] on usb-0000:00:13.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 19 (level,
low) -> IRQ 177
ehci_hcd 0000:00:13.2: PCI device 1002:4345 (ATI
Technologies Inc)
ehci_hcd 0000:00:13.2: irq 177, pci mem e0cba000
ehci_hcd 0000:00:13.2: new USB bus registered,
assigned bus number 3
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00,
driver 2004-May-10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 2-1: USB disconnect, address 2
usb 2-1: new low speed USB device using address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical
Mouse] on usb-0000:00:13.1-1
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 17 (level,
low) -> IRQ 193
ATI IXP AC97 controller: probe of 0000:00:14.5 failed
with error -13
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8-2-686-smp
FDC 0 is a National Semiconductor PC87306
pnp: Device 00:15 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xc68-0xc6f
0xcd0-0xcd7
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c031e0c0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 17 (level,
low) -> IRQ 193
ATI IXP AC97 controller: probe of 0000:00:14.5 failed
with error -13


Ciao e grazie.


		
___________________________________ 
Yahoo! Messenger: chiamate gratuite in tutto il mondo 
http://it.beta.messenger.yahoo.com
Reply to: