Bug#802275: xserver-xorg-core: X crashes after X -configure
Package: xserver-xorg-core
Version: 2:1.17.2-3
Severity: normal
Dear Maintainer,
* What led up to the situation?
I wanted to create a new xorg.conf for my Thinkpad X60s and my 19" display
attached to the docking station. In order to do that, I followed this
guideline: http://www.thinkwiki.org/wiki/Xorg_RandR_1.2
* What exactly did you do (or not do) that was effective (or
ineffective)?
I stoped the X-server with "service lightdm stop" and put in "X -configure"
* What was the outcome of this action?
I got this error-dump without special information:
X.Org X Server 1.17.2
Release Date: 2015-06-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
Current Operating System: Linux psyche 4.2.0-1-686-pae #1 SMP Debian 4.2.3-2
(2015-10-14) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-686-pae root=UUID=2e8153c3
-f74e-4aa7-a040-56cddec955c2 ro quiet
Build Date: 08 October 2015 10:05:01AM
xorg-server 2:1.17.2-3 (http://www.debian.org/support)
Current version of pixman: 0.33.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 18 23:28:13 2015
List of video drivers:
vmware
ztv
trident
tdfx
sisusb
siliconmotion
savage
r128
openchrome
nouveau
neomagic
mga
mach64
geode
cirrus
radeon
ati
intel
qxl
vesa
fbdev
modesetting
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x52) [0x80221cc2]
(EE) 1: /usr/lib/xorg/Xorg (0x8007d000+0x1a9072) [0x80226072]
(EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb770abc8]
(EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb46a0000+0xdd2e)
[0xb46add2e]
(EE) 4: /usr/lib/xorg/Xorg (0x8007d000+0xa1d08) [0x8011ed08]
(EE) 5: /usr/lib/xorg/Xorg (0x8007d000+0xa1e66) [0x8011ee66]
(EE) 6: /usr/lib/xorg/Xorg (0x8007d000+0xa2676) [0x8011f676]
(EE) 7: /usr/lib/xorg/Xorg (xf86CallDriverProbe+0x26) [0x800f1396]
(EE) 8: /usr/lib/xorg/Xorg (DoConfigure+0xd8) [0x800f0278]
(EE) 9: /usr/lib/xorg/Xorg (InitOutput+0x12e5) [0x801011f5]
(EE) 10: /usr/lib/xorg/Xorg (0x8007d000+0x4260f) [0x800bf60f]
(EE) 11: /usr/lib/xorg/Xorg (0x8007d000+0x2c32a) [0x800a932a]
(EE) 12: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf3)
[0xb7281a63]
(EE) 13: /usr/lib/xorg/Xorg (0x8007d000+0x2c368) [0x800a9368]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(EE)
(EE) Server terminated with error (1). Closing log file.
[ 28.855515] fbcon: inteldrmfb (fb0) is primary device
[ 28.987492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (700, 'unstable'), (650, 'testing'), (630, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 4.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.133
ii libaudit1 1:2.4.4-4
ii libc6 2.19-22
ii libdbus-1-3 1.10.0-3
ii libdrm2 2.4.64-1
ii libegl1-mesa 10.6.8-1
ii libepoxy0 1.3.1-1
ii libgbm1 10.6.8-1
ii libgcrypt20 1.6.4-3
ii libgl1-mesa-glx [libgl1] 10.6.8-1
ii libpciaccess0 0.13.4-1
ii libpixman-1-0 0.33.2-2
ii libselinux1 2.3-2+b1
ii libudev1 227-2
ii libxau6 1:1.0.8-1
ii libxdmcp6 1:1.1.2-1
ii libxfont1 1:1.5.1-1
ii libxshmfence1 1.2-1
ii udev 227-2
ii xserver-common 2:1.17.2-3
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 10.6.8-1
Versions of packages xserver-xorg-core suggests:
pn xfonts-100dpi | xfonts-75dpi <none>
pn xfonts-scalable <none>
-- no debconf information
[ 1318.117]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 1318.117] X Protocol Version 11, Revision 0
[ 1318.117] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[ 1318.117] Current Operating System: Linux psyche 4.2.0-1-686-pae #1 SMP Debian 4.2.3-2 (2015-10-14) i686
[ 1318.117] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-686-pae root=UUID=2e8153c3-f74e-4aa7-a040-56cddec955c2 ro quiet
[ 1318.117] Build Date: 08 October 2015 10:05:01AM
[ 1318.117] xorg-server 2:1.17.2-3 (http://www.debian.org/support)
[ 1318.117] Current version of pixman: 0.33.2
[ 1318.117] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1318.117] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1318.118] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 18 23:47:34 2015
[ 1318.118] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1318.118] (==) No Layout section. Using the first Screen section.
[ 1318.118] (==) No screen section available. Using defaults.
[ 1318.118] (**) |-->Screen "Default Screen Section" (0)
[ 1318.118] (**) | |-->Monitor "<default monitor>"
[ 1318.119] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1318.119] (==) Automatically adding devices
[ 1318.119] (==) Automatically enabling devices
[ 1318.119] (==) Automatically adding GPU devices
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 1318.119] Entry deleted from font path.
[ 1318.119] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 1318.119] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1318.119] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1318.119] (II) Loader magic: 0x80350700
[ 1318.119] (II) Module ABI versions:
[ 1318.119] X.Org ANSI C Emulation: 0.4
[ 1318.119] X.Org Video Driver: 19.0
[ 1318.119] X.Org XInput driver : 21.0
[ 1318.119] X.Org Server Extension : 9.0
[ 1318.121] (EE) systemd-logind: failed to get session: PID 2278 does not belong to any known session
[ 1318.122] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1318.124] (--) PCI:*(0:0:2:0) 8086:27a2:17aa:201a rev 3, Mem @ 0xe4300000/524288, 0xd0000000/268435456, 0xe4400000/262144, I/O @ 0x000050a0/8
[ 1318.124] (--) PCI: (0:0:2:1) 8086:27a6:17aa:201a rev 3, Mem @ 0xe4380000/524288
[ 1318.124] (II) LoadModule: "glx"
[ 1318.125] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1318.126] (II) Module glx: vendor="X.Org Foundation"
[ 1318.126] compiled for 1.17.2, module version = 1.0.0
[ 1318.126] ABI class: X.Org Server Extension, version 9.0
[ 1318.126] (==) AIGLX enabled
[ 1318.126] (==) Matched intel as autoconfigured driver 0
[ 1318.126] (==) Matched intel as autoconfigured driver 1
[ 1318.126] (==) Matched modesetting as autoconfigured driver 2
[ 1318.126] (==) Matched fbdev as autoconfigured driver 3
[ 1318.126] (==) Matched vesa as autoconfigured driver 4
[ 1318.126] (==) Assigned the driver to the xf86ConfigLayout
[ 1318.126] (II) LoadModule: "intel"
[ 1318.127] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1318.127] (II) Module intel: vendor="X.Org Foundation"
[ 1318.127] compiled for 1.17.2, module version = 2.99.917
[ 1318.127] Module class: X.Org Video Driver
[ 1318.127] ABI class: X.Org Video Driver, version 19.0
[ 1318.127] (II) LoadModule: "modesetting"
[ 1318.127] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1318.127] (II) Module modesetting: vendor="X.Org Foundation"
[ 1318.128] compiled for 1.17.2, module version = 1.17.2
[ 1318.128] Module class: X.Org Video Driver
[ 1318.128] ABI class: X.Org Video Driver, version 19.0
[ 1318.128] (II) LoadModule: "fbdev"
[ 1318.128] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1318.128] (II) Module fbdev: vendor="X.Org Foundation"
[ 1318.128] compiled for 1.17.1, module version = 0.4.4
[ 1318.128] Module class: X.Org Video Driver
[ 1318.128] ABI class: X.Org Video Driver, version 19.0
[ 1318.128] (II) LoadModule: "vesa"
[ 1318.128] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1318.128] (II) Module vesa: vendor="X.Org Foundation"
[ 1318.128] compiled for 1.17.1, module version = 2.3.3
[ 1318.128] Module class: X.Org Video Driver
[ 1318.128] ABI class: X.Org Video Driver, version 19.0
[ 1318.128] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1318.129] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 1318.129] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 1318.129] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 1318.129] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1318.129] (II) FBDEV: driver for framebuffer: fbdev
[ 1318.129] (II) VESA: driver for VESA chipsets: vesa
[ 1318.129] (++) using VT number 7
[ 1318.162] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150522
[ 1318.163] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-2 (Vincent Cheng <vcheng@debian.org>)
[ 1318.163] (II) intel(0): SNA compiled for use with valgrind
[ 1318.163] (WW) Falling back to old probe method for modesetting
[ 1318.163] (WW) Falling back to old probe method for fbdev
[ 1318.163] (II) Loading sub module "fbdevhw"
[ 1318.163] (II) LoadModule: "fbdevhw"
[ 1318.163] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1318.163] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1318.163] compiled for 1.17.2, module version = 0.0.2
[ 1318.163] ABI class: X.Org Video Driver, version 19.0
[ 1318.163] (WW) Falling back to old probe method for vesa
[ 1318.164] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 1318.164] (--) intel(0): CPU: x86, sse2, sse3
[ 1318.164] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1318.164] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1318.164] (==) intel(0): RGB weight 888
[ 1318.164] (==) intel(0): Default visual is TrueColor
[ 1318.164] (II) intel(0): Output LVDS1 has no monitor section
[ 1318.180] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 1318.180] (II) intel(0): Enabled output LVDS1
[ 1318.180] (II) intel(0): Output VGA1 has no monitor section
[ 1318.180] (II) intel(0): Enabled output VGA1
[ 1318.180] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 1318.180] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 1318.180] (II) intel(0): Enabled output VIRTUAL1
[ 1318.180] (--) intel(0): Output LVDS1 using initial mode 1024x768 on pipe 1
[ 1318.180] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0
[ 1318.180] (==) intel(0): TearFree disabled
[ 1318.180] (==) intel(0): DPI set to (96, 96)
[ 1318.180] (II) Loading sub module "dri2"
[ 1318.180] (II) LoadModule: "dri2"
[ 1318.180] (II) Module "dri2" already built-in
[ 1318.180] (II) Loading sub module "present"
[ 1318.180] (II) LoadModule: "present"
[ 1318.180] (II) Module "present" already built-in
[ 1318.180] (II) UnloadModule: "modesetting"
[ 1318.180] (II) Unloading modesetting
[ 1318.181] (II) UnloadModule: "fbdev"
[ 1318.181] (II) Unloading fbdev
[ 1318.181] (II) UnloadSubModule: "fbdevhw"
[ 1318.181] (II) Unloading fbdevhw
[ 1318.181] (II) UnloadModule: "vesa"
[ 1318.181] (II) Unloading vesa
[ 1318.181] (==) Depth 24 pixmap format is 32 bpp
[ 1318.181] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 1318.181] (==) intel(0): Backing store enabled
[ 1318.181] (==) intel(0): Silken mouse enabled
[ 1318.181] (II) intel(0): HW Cursor enabled
[ 1318.181] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1318.181] (==) intel(0): DPMS enabled
[ 1318.181] (==) intel(0): display hotplug detection enabled
[ 1318.181] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 1318.181] (II) intel(0): [DRI2] Setup complete
[ 1318.182] (II) intel(0): [DRI2] DRI driver: i915
[ 1318.182] (II) intel(0): [DRI2] VDPAU driver: i915
[ 1318.182] (II) intel(0): direct rendering: DRI2 enabled
[ 1318.182] (II) intel(0): hardware support for Present enabled
[ 1318.182] (--) RandR disabled
[ 1318.197] (II) SELinux: Disabled on system
[ 1318.205] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1318.205] (II) AIGLX: enabled GLX_ARB_create_context
[ 1318.205] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1318.205] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1318.205] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1318.205] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1318.205] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1318.205] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1318.205] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1318.205] (II) AIGLX: Loaded and initialized i915
[ 1318.205] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1318.223] (II) intel(0): switch to mode 1280x1024@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 1318.226] (II) intel(0): switch to mode 1024x768@50.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 1318.226] (II) intel(0): Setting screen physical size to 338 x 270
[ 1318.288] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 1318.288] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1318.288] (II) LoadModule: "evdev"
[ 1318.288] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1318.289] (II) Module evdev: vendor="X.Org Foundation"
[ 1318.289] compiled for 1.16.4, module version = 2.9.2
[ 1318.289] Module class: X.Org XInput Driver
[ 1318.289] ABI class: X.Org XInput driver, version 21.0
[ 1318.289] (II) Using input driver 'evdev' for 'Power Button'
[ 1318.289] (**) Power Button: always reports core events
[ 1318.289] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 1318.289] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1318.289] (--) evdev: Power Button: Found keys
[ 1318.289] (II) evdev: Power Button: Configuring as keyboard
[ 1318.289] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[ 1318.289] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1318.289] (**) Option "xkb_rules" "evdev"
[ 1318.289] (**) Option "xkb_model" "pc105"
[ 1318.289] (**) Option "xkb_layout" "de"
[ 1318.323] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1318.323] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1318.323] (II) Using input driver 'evdev' for 'Video Bus'
[ 1318.323] (**) Video Bus: always reports core events
[ 1318.323] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 1318.323] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1318.323] (--) evdev: Video Bus: Found keys
[ 1318.323] (II) evdev: Video Bus: Configuring as keyboard
[ 1318.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event6"
[ 1318.323] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1318.323] (**) Option "xkb_rules" "evdev"
[ 1318.324] (**) Option "xkb_model" "pc105"
[ 1318.324] (**) Option "xkb_layout" "de"
[ 1318.325] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 1318.325] (II) No input driver specified, ignoring this device.
[ 1318.325] (II) This device may have been added with another device file.
[ 1318.326] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1318.326] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1318.326] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1318.326] (**) Sleep Button: always reports core events
[ 1318.326] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 1318.326] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1318.326] (--) evdev: Sleep Button: Found keys
[ 1318.326] (II) evdev: Sleep Button: Configuring as keyboard
[ 1318.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input4/event3"
[ 1318.326] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 1318.326] (**) Option "xkb_rules" "evdev"
[ 1318.326] (**) Option "xkb_model" "pc105"
[ 1318.326] (**) Option "xkb_layout" "de"
[ 1318.328] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 1318.328] (II) No input driver specified, ignoring this device.
[ 1318.328] (II) This device may have been added with another device file.
[ 1318.328] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[ 1318.328] (II) No input driver specified, ignoring this device.
[ 1318.328] (II) This device may have been added with another device file.
[ 1318.329] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event10)
[ 1318.329] (II) No input driver specified, ignoring this device.
[ 1318.329] (II) This device may have been added with another device file.
[ 1318.330] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event11)
[ 1318.330] (II) No input driver specified, ignoring this device.
[ 1318.330] (II) This device may have been added with another device file.
[ 1318.330] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event12)
[ 1318.330] (II) No input driver specified, ignoring this device.
[ 1318.330] (II) This device may have been added with another device file.
[ 1318.331] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event13)
[ 1318.331] (II) No input driver specified, ignoring this device.
[ 1318.331] (II) This device may have been added with another device file.
[ 1318.332] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[ 1318.332] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1318.332] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 1318.332] (**) USB Optical Mouse: always reports core events
[ 1318.332] (**) evdev: USB Optical Mouse: Device: "/dev/input/event2"
[ 1318.388] (--) evdev: USB Optical Mouse: Vendor 0x4b3 Product 0x310c
[ 1318.388] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 1318.388] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 1318.388] (--) evdev: USB Optical Mouse: Found relative axes
[ 1318.388] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 1318.388] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 1318.388] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 1318.388] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1318.388] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1318.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.1/2-6.1:1.0/0003:04B3:310C.0006/input/input19/event2"
[ 1318.388] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 9)
[ 1318.388] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 1318.388] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1318.388] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 1318.388] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1318.388] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 1318.389] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 1318.389] (II) No input driver specified, ignoring this device.
[ 1318.389] (II) This device may have been added with another device file.
[ 1318.391] (II) config/udev: Adding input device HID 046a:0011 (/dev/input/event1)
[ 1318.391] (**) HID 046a:0011: Applying InputClass "evdev keyboard catchall"
[ 1318.391] (II) Using input driver 'evdev' for 'HID 046a:0011'
[ 1318.391] (**) HID 046a:0011: always reports core events
[ 1318.391] (**) evdev: HID 046a:0011: Device: "/dev/input/event1"
[ 1318.391] (--) evdev: HID 046a:0011: Vendor 0x46a Product 0x11
[ 1318.391] (--) evdev: HID 046a:0011: Found keys
[ 1318.391] (II) evdev: HID 046a:0011: Configuring as keyboard
[ 1318.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6.2/2-6.2:1.0/0003:046A:0011.0005/input/input18/event1"
[ 1318.391] (II) XINPUT: Adding extended input device "HID 046a:0011" (type: KEYBOARD, id 10)
[ 1318.391] (**) Option "xkb_rules" "evdev"
[ 1318.391] (**) Option "xkb_model" "pc105"
[ 1318.391] (**) Option "xkb_layout" "de"
[ 1318.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1318.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1318.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1318.392] (**) AT Translated Set 2 keyboard: always reports core events
[ 1318.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1318.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1318.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1318.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1318.393] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1318.393] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 1318.393] (**) Option "xkb_rules" "evdev"
[ 1318.393] (**) Option "xkb_model" "pc105"
[ 1318.393] (**) Option "xkb_layout" "de"
[ 1318.394] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 1318.394] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 1318.394] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 1318.394] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 1318.394] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 1318.394] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 1318.394] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 1318.394] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 1318.394] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 1318.394] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 1318.394] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 1318.394] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1318.394] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event14"
[ 1318.394] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 1318.394] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 1318.394] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 1318.394] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 1318.395] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 1318.395] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 1318.395] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 1318.395] (II) No input driver specified, ignoring this device.
[ 1318.395] (II) This device may have been added with another device file.
[ 1318.396] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 1318.396] (II) No input driver specified, ignoring this device.
[ 1318.396] (II) This device may have been added with another device file.
[ 1326.989] (II) intel(0): EDID vendor "LEN", prod id 16384
[ 1326.989] (II) intel(0): Printing DDC gathered Modelines:
[ 1326.989] (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz eP)
[ 1326.989] (II) intel(0): Modeline "1024x768"x0.0 43.33 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (32.2 kHz e)
[ 1326.989] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1326.989] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1326.989] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
Reply to: