Bug#802186: xserver-xorg-video-ati: Complete system lockup after some time when using radeon driver in xorg.conf
Package: xserver-xorg-video-ati
Version: 1:7.5.0-1+b1
Severity: important
Dear Maintainer,
the latest xorg driver suffers a couple of severity issues and they can lead to a unusable X setup, or a
complete locked-up system (only hard reset is the only way to recover from this...)
1- It seems the xorg probe procedure is unable to create a valid xorg configuration if there is no /etc/X11/xorg at all.
This issue can be workarounded creating a simple and valid xorg.conf with a valid BusID card location.
If BusID is missing the Xorg crashes with a segfault. Not a big issue for me...
2- when the radeon driver in xorg.conf is used, the system is usable for 30/45 minutes (even if it remains in idle for most
of the time) then hangs. All resources are locked, and curiously if a audio playing was running a DMA-loop-whatever
is playing the last chunk of audio-data in the audio buffer. I suspect a complete CPU hang.
The system is using the drm radeon driver as usual and no problems when starting-up the system.
If I switch to fbdev in xorg.conf (i.e. it still uses the kernel drm driver anyway) the system runs fine forever...
This architecture has two video boards installed: a NVIDIA 6600 with OpenFirmware Flash in the slower PCI-E Bus 8X and
a BIOS Flashed ATI-RadeonHD 4670 in the faster bus lane PCI-E 16X.
3- The kernel cmdline is the following:
video=offb:off nouveau.modeset=1 nouveau.noaccel=1 radeon.modeset=1 radeon.agpmode=-1 fastboot loglevel=3
Not speaking about the 3d Mesa/Gallium support that it is *COMPLETELY BROKEN* here. But this is another story.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 May 16 00:43 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Oct 8 12:09 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
0000:0a:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV730 XT [Radeon HD 4670] [1002:9490]
0001:06:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 6600] [10de:0141] (rev a2)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 10130 Oct 13 20:41 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
# Option "SWcursor" "boolean" Selects software cursor. The default is off.
# Option "NoAccel" "boolean" Enables or disables all hardware acceleration. The default is to enable hardware acceleration.
# Option "ZaphodHeads" "string" Specify the RandR output(s) to use with
# zaphod mode for a particular driver instance.
# If you use this option you must use this
# option for all instances of the driver.
# For example:
# Option "ZaphodHeads" "LVDS,VGA-0"
# will assign xrandr outputs LVDS and VGA-0 to this instance of the driver.
# Option "EXAVSync" "boolean" This option attempts to avoid tearing by
# stalling the engine until the display controller
# has passed the destination region. It reduces
# tearing at the cost of performance and has been known
# to cause instability on some chips. The default is off.
# The following driver Options are supported for KMS (Kernel Modesetting):
# Option "ColorTiling" "boolean" The framebuffer can be addressed either
# in linear or tiled mode. Tiled mode can provide
# significant performance benefits with 3D applications.
# Tiling will be disabled if the drm module is too old or
# if the current display configuration does not support it.
# On R600+ this enables 1D tiling mode.
# The default value is on for R/RV3XX, R/RV4XX, R/RV5XX, RS6XX,
# RS740, R/RV6XX, R/RV7XX, RS780, RS880, EVERGREEN,
# and CAYMAN and off for R/RV/RS1XX, R/RV/RS2XX, and RS3XX.
# Option "ColorTiling2D" "boolean" The framebuffer can be addressed either in linear,
# 1D, or 2D tiled modes. 2D tiled mode can provide
# significant performance benefits over 1D tiling with 3D applications.
# Tiling will be disabled if the drm module is too old or if
# the current display configuration does not support it.
# KMS ColorTiling2D is only supported on R600 and newer chips.
# The default value is off for R/RV6XX, R/RV7XX, RS780, RS880, EVERGREEN, and CAYMAN.
# Option "EXAPixmaps" "boolean" Under KMS, to avoid thrashing pixmaps in/out of VRAM
# on low memory cards, we use a heuristic based on VRAM
# amount to determine whether to allow EXA to use VRAM
# for non-essential pixmaps. This option allows us to override
# the heuristic. The default is on with > 32MB VRAM, off with < 32MB.
# Option "SwapbuffersWait" "boolean" This option controls the behavior of glXSwapBuffers
# and glXCopySubBufferMESA calls by GL applications.
# If enabled, the calls will avoid tearing by making sure
# the display scanline is outside of the area to be copied before the copy occurs.
# If disabled, no scanline synchronization is performed, meaning tearing will likely occur.
# Note that when enabled, this option can adversely affect the framerate
# of applications that render frames at less than refresh rate.
# The default value is on.
# Option "EnablePageFlip" "boolean" Enable DRI2 page flipping. The default is on.
# Pageflipping is supported on all radeon hardware.
# Option "RenderAccel" "boolean" Enables or disables hardware Render acceleration.
# It is supported on all Radeon cards when using EXA acceleration and
# on Radeon R/RV/RS1xx, R/RV/RS2xx and RS3xx when using XAA.
# The default is to enable Render acceleration.
# Option "AccelMethod" "string" Chooses between available acceleration architectures.
# Valid options are XAA and EXA. XAA is the traditional acceleration architecture
# and support for it is very stable. EXA is a newer acceleration architecture
# with better performance for the Render and Composite extensions. The default is EXA.
# Option "AccelDFS" "boolean" Use or dont use accelerated EXA DownloadFromScreen hook when possible
# (only when Direct Rendering is enabled, e.g.). Default: off with AGP
# due to issues with GPU->host transfers with some AGP bridges, on otherwise.
# Option "FBTexPercent" "integer" Amount of video RAM to reserve for OpenGL textures, in percent.
# With EXA, the remainder of video RAM is reserved for EXA offscreen management.
# Specifying 0 results in all offscreen video RAM being reserved for EXA and only
# GART memory being available for OpenGL textures. This may improve EXA performance,
# but beware that it may cause problems with OpenGL drivers from Mesa versions older than 6.4.
# With XAA, specifying lower percentage than what gets reserved without this option has no effect,
# but the driver tries to increase the video RAM reserved for textures to the amount specified roughly.
# Default: 50.
# Option "DepthBits" "integer" Precision in bits per pixel of the shared depth buffer used for 3D acceleration.
# Valid values are 16 and 24. When this is 24, there will also be a hardware accelerated
# stencil buffer, but the combined depth/stencil buffer will take up twice as much video
# RAM as when its 16. Default: The same as the screen depth.
# Option "DMAForXv" "boolean" Try or dont try to use DMA for Xv image transfers.
# This will reduce CPU usage when playing big videos like DVDs,
# but may cause instabilities. Default: on.
# Option "DRI" "boolean" Enable DRI support. This option allows you to enable to disable the DRI.
# The default is off for RN50/ES1000 and on for others.
# Option "TVStandard" "string" Used to specify the default TV standard if you want to use something
# other than the BIOS default. Valid options are:
# ntsc pal pal-m pal-60 ntsc-j scart-pal The default value is undefined.
# Option "ForceTVOut" "boolean" Enable this option to force TV-out to always
# be detected as attached. The default is off
Section "Device"
Option "SWcursor" "false"
Option "NoAccel" "false"
Option "EXAVSync" "false"
Option "ColorTiling" "true"
Option "ColorTiling2D" "false"
Option "EXAPixmaps" "true"
Option "SwapbuffersWait" "true"
Option "EnablePageFlip" "true"
Option "RenderAccel" "true"
Option "AccelMethod" "EXA"
Option "AccelDFS" "true"
Option "FBTexPercent" "50"
Option "DepthBits" "24"
Option "DMAForXv" "true"
Option "DRI" "true"
Identifier "Card0"
# Driver "radeon"
Driver "fbdev"
BusID "PCI:10:0:0"
EndSection
Section "Device"
Option "EnablePageFlip" "true"
Option "AccelDFS" "on"
Option "RenderAccel" "true"
Option "AccelMethod" "EXA"
Option "EXAVSync" "true"
Identifier "Card1"
# Driver "nouveau"
Driver "fbdev"
BusID "PCI:6:0:0"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
# Device "Card1"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
DefaultDepth 24
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 4.2.0-1-powerpc64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-4) ) #1 SMP Debian 4.2.3-2 (2015-10-14)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 2464 May 16 17:47 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 2464 May 16 17:48 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 0 May 16 17:49 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 49886 Sep 27 21:59 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 26328 Oct 18 08:16 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 39.436]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 39.437] X Protocol Version 11, Revision 0
[ 39.437] Build Operating System: Linux 3.16.0-4-powerpc64 ppc Debian
[ 39.437] Current Operating System: Linux debian 4.2.0-1-powerpc64 #1 SMP Debian 4.2.3-2 (2015-10-14) ppc64
[ 39.437] Kernel command line: root=UUID=dc2a2a06-9146-4a6f-b813-760477b485a5 ro video=offb:off nouveau.modeset=1 nouveau.noaccel=1 radeon.modeset=1 radeon.agpmode=-1 fastboot loglevel=3
[ 39.437] Build Date: 08 October 2015 09:58:28AM
[ 39.437] xorg-server 2:1.17.2-3 (http://www.debian.org/support)
[ 39.437] Current version of pixman: 0.33.2
[ 39.437] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 39.437] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 39.438] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 18 08:16:01 2015
[ 39.556] (==) Using config file: "/etc/X11/xorg.conf"
[ 39.556] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 39.671] (==) ServerLayout "X.org Configured"
[ 39.671] (**) |-->Screen "Screen0" (0)
[ 39.671] (**) | |-->Monitor "Monitor0"
[ 39.694] (**) | |-->Device "Card0"
[ 39.694] (**) |-->Input Device "Mouse0"
[ 39.694] (**) |-->Input Device "Keyboard0"
[ 39.694] (==) Automatically adding devices
[ 39.694] (==) Automatically enabling devices
[ 39.694] (==) Automatically adding GPU devices
[ 39.769] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 39.769] Entry deleted from font path.
[ 40.151] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 40.151] Entry deleted from font path.
[ 40.151] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 40.151] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 40.151] (**) Extension "Composite" is enabled
[ 40.151] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 40.152] (WW) Disabling Mouse0
[ 40.152] (WW) Disabling Keyboard0
[ 40.152] (II) Loader magic: 0x209c06e0
[ 40.152] (II) Module ABI versions:
[ 40.152] X.Org ANSI C Emulation: 0.4
[ 40.152] X.Org Video Driver: 19.0
[ 40.152] X.Org XInput driver : 21.0
[ 40.152] X.Org Server Extension : 9.0
[ 40.156] (EE) systemd-logind: failed to get session: PID 1035 does not belong to any known session
[ 40.159] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 40.162] (--) PCI: (0:10:0:0) 1002:9490:174b:e101 rev 0, Mem @ 0xa0000000/268435456, 0xb0020000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[ 40.162] (--) PCI:*(1:6:0:0) 10de:0141:10de:0010 rev 162, Mem @ 0x82000000/16777216, 0x90000000/268435456, 0x81000000/16777216, BIOS @ 0x????????/131072
[ 40.162] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 40.162] (II) LoadModule: "glx"
[ 40.257] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 40.602] (II) Module glx: vendor="X.Org Foundation"
[ 40.602] compiled for 1.17.2, module version = 1.0.0
[ 40.602] ABI class: X.Org Server Extension, version 9.0
[ 40.602] (==) AIGLX enabled
[ 40.602] (II) LoadModule: "dri"
[ 40.602] (II) Module "dri" already built-in
[ 40.602] (II) LoadModule: "dri2"
[ 40.603] (II) Module "dri2" already built-in
[ 40.603] (II) LoadModule: "fbdev"
[ 40.642] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 40.651] (II) Module fbdev: vendor="X.Org Foundation"
[ 40.651] compiled for 1.17.1, module version = 0.4.4
[ 40.651] Module class: X.Org Video Driver
[ 40.651] ABI class: X.Org Video Driver, version 19.0
[ 40.651] (II) FBDEV: driver for framebuffer: fbdev
[ 40.651] (++) using VT number 7
[ 40.661] (II) Loading sub module "fbdevhw"
[ 40.661] (II) LoadModule: "fbdevhw"
[ 40.661] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 40.772] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 40.772] compiled for 1.17.2, module version = 0.0.2
[ 40.772] ABI class: X.Org Video Driver, version 19.0
[ 40.772] (**) FBDEV(0): claimed PCI slot 10@0:0:0
[ 40.772] (II) FBDEV(0): using default device
[ 40.773] (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
[ 40.773] (==) FBDEV(0): RGB weight 888
[ 40.773] (==) FBDEV(0): Default visual is TrueColor
[ 40.773] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 40.773] (II) FBDEV(0): hardware: radeondrmfb (video memory: 7168kB)
[ 40.773] (II) FBDEV(0): checking modes against framebuffer device...
[ 40.773] (II) FBDEV(0): checking modes against monitor...
[ 40.773] (--) FBDEV(0): Virtual size is 1680x1050 (pitch 1680)
[ 40.773] (**) FBDEV(0): Built-in mode "current"
[ 40.773] (==) FBDEV(0): DPI set to (96, 96)
[ 40.773] (II) Loading sub module "fb"
[ 40.773] (II) LoadModule: "fb"
[ 40.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 40.852] (II) Module fb: vendor="X.Org Foundation"
[ 40.852] compiled for 1.17.2, module version = 1.0.0
[ 40.852] ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.852] (**) FBDEV(0): using shadow framebuffer
[ 40.852] (II) Loading sub module "shadow"
[ 40.852] (II) LoadModule: "shadow"
[ 40.853] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 40.915] (II) Module shadow: vendor="X.Org Foundation"
[ 40.915] compiled for 1.17.2, module version = 1.1.0
[ 40.915] ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.915] (==) Depth 24 pixmap format is 32 bpp
[ 40.989] (==) FBDEV(0): Backing store enabled
[ 40.990] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.990] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.990] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.990] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.990] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.991] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.992] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.993] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.994] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 40.995] (==) FBDEV(0): DPMS enabled
[ 41.086] (==) RandR enabled
[ 41.175] (II) SELinux: Disabled on system
[ 41.183] (II) AIGLX: Screen 0 is not DRI2 capable
[ 41.183] (EE) AIGLX: reverting to software rendering
[ 41.727] (II) AIGLX: Loaded and initialized swrast
[ 41.727] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 44.654] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[ 44.654] (II) No input driver specified, ignoring this device.
[ 44.654] (II) This device may have been added with another device file.
[ 44.655] (II) config/udev: Adding input device Mitsumi Electric Apple Optical USB Mouse (/dev/input/event2)
[ 44.656] (**) Mitsumi Electric Apple Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 44.656] (II) LoadModule: "evdev"
[ 44.656] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 44.861] (II) Module evdev: vendor="X.Org Foundation"
[ 44.861] compiled for 1.16.4, module version = 2.9.2
[ 44.861] Module class: X.Org XInput Driver
[ 44.861] ABI class: X.Org XInput driver, version 21.0
[ 44.861] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Optical USB Mouse'
[ 44.861] (**) Mitsumi Electric Apple Optical USB Mouse: always reports core events
[ 44.861] (**) evdev: Mitsumi Electric Apple Optical USB Mouse: Device: "/dev/input/event2"
[ 44.916] (--) evdev: Mitsumi Electric Apple Optical USB Mouse: Vendor 0x5ac Product 0x304
[ 44.916] (--) evdev: Mitsumi Electric Apple Optical USB Mouse: Found 8 mouse buttons
[ 44.916] (--) evdev: Mitsumi Electric Apple Optical USB Mouse: Found scroll wheel(s)
[ 44.916] (--) evdev: Mitsumi Electric Apple Optical USB Mouse: Found relative axes
[ 44.916] (--) evdev: Mitsumi Electric Apple Optical USB Mouse: Found x and y relative axes
[ 44.916] (II) evdev: Mitsumi Electric Apple Optical USB Mouse: Configuring as mouse
[ 44.916] (II) evdev: Mitsumi Electric Apple Optical USB Mouse: Adding scrollwheel support
[ 44.916] (**) evdev: Mitsumi Electric Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 44.916] (**) evdev: Mitsumi Electric Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 44.916] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2/event2"
[ 44.916] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Optical USB Mouse" (type: MOUSE, id 6)
[ 44.917] (II) evdev: Mitsumi Electric Apple Optical USB Mouse: initialized for relative axes.
[ 44.918] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 44.918] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) acceleration profile 0
[ 44.918] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) acceleration factor: 2.000
[ 44.918] (**) Mitsumi Electric Apple Optical USB Mouse: (accel) acceleration threshold: 4
[ 44.921] (II) config/udev: Adding input device Mitsumi Electric Apple Optical USB Mouse (/dev/input/mouse0)
[ 44.921] (II) No input driver specified, ignoring this device.
[ 44.921] (II) This device may have been added with another device file.
[ 44.924] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event0)
[ 44.924] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 44.924] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 44.924] (**) Apple Inc. Apple Keyboard: always reports core events
[ 44.924] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event0"
[ 44.924] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 44.924] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 44.924] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 44.924] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0001/input/input0/event0"
[ 44.924] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 7)
[ 44.924] (**) Option "xkb_rules" "evdev"
[ 44.925] (**) Option "xkb_model" "pc105"
[ 44.925] (**) Option "xkb_layout" "us"
[ 44.928] (II) config/udev: Adding input device Apple Inc. Apple Keyboard (/dev/input/event1)
[ 44.929] (**) Apple Inc. Apple Keyboard: Applying InputClass "evdev keyboard catchall"
[ 44.929] (II) Using input driver 'evdev' for 'Apple Inc. Apple Keyboard'
[ 44.929] (**) Apple Inc. Apple Keyboard: always reports core events
[ 44.929] (**) evdev: Apple Inc. Apple Keyboard: Device: "/dev/input/event1"
[ 44.929] (--) evdev: Apple Inc. Apple Keyboard: Vendor 0x5ac Product 0x24f
[ 44.929] (--) evdev: Apple Inc. Apple Keyboard: Found keys
[ 44.929] (II) evdev: Apple Inc. Apple Keyboard: Configuring as keyboard
[ 44.929] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0002/input/input1/event1"
[ 44.929] (II) XINPUT: Adding extended input device "Apple Inc. Apple Keyboard" (type: KEYBOARD, id 8)
[ 44.929] (**) Option "xkb_rules" "evdev"
[ 44.929] (**) Option "xkb_model" "pc105"
[ 44.929] (**) Option "xkb_layout" "us"
[ 44.933] (II) config/udev: Adding input device Altair USB2.0 Camera (/dev/input/event4)
[ 44.933] (**) Altair USB2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 44.933] (II) Using input driver 'evdev' for 'Altair USB2.0 Camera'
[ 44.933] (**) Altair USB2.0 Camera: always reports core events
[ 44.933] (**) evdev: Altair USB2.0 Camera: Device: "/dev/input/event4"
[ 44.933] (--) evdev: Altair USB2.0 Camera: Vendor 0xac8 Product 0x3450
[ 44.933] (--) evdev: Altair USB2.0 Camera: Found keys
[ 44.933] (II) evdev: Altair USB2.0 Camera: Configuring as keyboard
[ 44.933] (**) Option "config_info" "udev:/sys/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/input/input4/event4"
[ 44.933] (II) XINPUT: Adding extended input device "Altair USB2.0 Camera" (type: KEYBOARD, id 9)
[ 44.933] (**) Option "xkb_rules" "evdev"
[ 44.933] (**) Option "xkb_model" "pc105"
[ 44.933] (**) Option "xkb_layout" "us"
udev information:
-----------------
P: /devices/pci0000:00/0000:00:0b.0/0000:0a:00.1/sound/card1/input3
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:0a:00.1/sound/card1/input3
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_0a_00_1
E: ID_INPUT=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA ATI HDMI HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: TAGS=:seat:
E: USEC_INITIALIZED=17007978
P: /devices/pci0000:00/0000:00:0b.0/0000:0a:00.1/sound/card1/input3/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:0b.0/0000:0a:00.1/sound/card1/input3/event3
E: ID_INPUT=1
E: ID_PATH=pci-0000:0a:00.1
E: ID_PATH_TAG=pci-0000_0a_00_1
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=17145132
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2
E: EV=100017
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0001_01_0b_0-usb-0_2_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Apple_Optical_USB_Mouse
E: ID_MODEL_ENC=Apple\x20Optical\x20USB\x20Mouse
E: ID_MODEL_ID=0304
E: ID_PATH=pci-0001:01:0b.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0001_01_0b_0-usb-0_2_1_0
E: ID_REVISION=0110
E: ID_SERIAL=Mitsumi_Electric_Apple_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: KEY=f0000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v05ACp0304e0110-e0,1,2,4,14,k110,111,112,113,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Mitsumi Electric Apple Optical USB Mouse"
E: PHYS="usb-0001:01:0b.0-2/input0"
E: PRODUCT=3/5ac/304/110
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2300289
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2/event2
N: input/event2
S: input/by-id/usb-Mitsumi_Electric_Apple_Optical_USB_Mouse-event-mouse
S: input/by-path/pci-0001:01:0b.0-usb-0:2:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Mitsumi_Electric_Apple_Optical_USB_Mouse-event-mouse /dev/input/by-path/pci-0001:01:0b.0-usb-0:2:1.0-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Apple_Optical_USB_Mouse
E: ID_MODEL_ENC=Apple\x20Optical\x20USB\x20Mouse
E: ID_MODEL_ID=0304
E: ID_PATH=pci-0001:01:0b.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0001_01_0b_0-usb-0_2_1_0
E: ID_REVISION=0110
E: ID_SERIAL=Mitsumi_Electric_Apple_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18163080
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2/mouse0
N: input/mouse0
S: input/by-id/usb-Mitsumi_Electric_Apple_Optical_USB_Mouse-mouse
S: input/by-path/pci-0001:01:0b.0-usb-0:2:1.0-mouse
E: DEVLINKS=/dev/input/by-path/pci-0001:01:0b.0-usb-0:2:1.0-mouse /dev/input/by-id/usb-Mitsumi_Electric_Apple_Optical_USB_Mouse-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:05AC:0304.0003/input/input2/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Apple_Optical_USB_Mouse
E: ID_MODEL_ENC=Apple\x20Optical\x20USB\x20Mouse
E: ID_MODEL_ID=0304
E: ID_PATH=pci-0001:01:0b.0-usb-0:2:1.0
E: ID_PATH_TAG=pci-0001_01_0b_0-usb-0_2_1_0
E: ID_REVISION=0110
E: ID_SERIAL=Mitsumi_Electric_Apple_Optical_USB_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2301298
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0001/input/input0
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0001/input/input0
E: EV=120013
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0001_01_0b_2-usb-0_1_2_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Apple_Keyboard
E: ID_MODEL_ENC=Apple\x20Keyboard
E: ID_MODEL_ID=024f
E: ID_PATH=pci-0001:01:0b.2-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_1_2_1_0
E: ID_REVISION=0074
E: ID_SERIAL=Apple_Inc._Apple_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Apple_Inc.
E: ID_VENDOR_ENC=Apple\x20Inc.
E: ID_VENDOR_ID=05ac
E: KEY=10000 0 0 0 0 0 0 1007b 1007 ff9f207a c14057ff ffbeffdf ffefffff ffffffff fffffffe
E: LED=1f
E: MODALIAS=input:b0003v05ACp024Fe0111-e0,1,4,11,14,k71,72,73,74,75,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CC,E0,E1,E3,E4,E5,E6,F0,1D0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Apple Inc. Apple Keyboard"
E: PHYS="usb-0001:01:0b.2-1.2/input0"
E: PRODUCT=3/5ac/24f/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2297583
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0001/input/input0/event0
N: input/event0
S: input/by-id/usb-Apple_Inc._Apple_Keyboard-event-kbd
S: input/by-path/pci-0001:01:0b.2-usb-0:1.2:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Apple_Inc._Apple_Keyboard-event-kbd /dev/input/by-path/pci-0001:01:0b.2-usb-0:1.2:1.0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AC:024F.0001/input/input0/event0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Apple_Keyboard
E: ID_MODEL_ENC=Apple\x20Keyboard
E: ID_MODEL_ID=024f
E: ID_PATH=pci-0001:01:0b.2-usb-0:1.2:1.0
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_1_2_1_0
E: ID_REVISION=0074
E: ID_SERIAL=Apple_Inc._Apple_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Apple_Inc.
E: ID_VENDOR_ENC=Apple\x20Inc.
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18107567
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0002/input/input1
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0002/input/input1
E: EV=13
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0001_01_0b_2-usb-0_1_2_1_1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Apple_Keyboard
E: ID_MODEL_ENC=Apple\x20Keyboard
E: ID_MODEL_ID=024f
E: ID_PATH=pci-0001:01:0b.2-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_1_2_1_1
E: ID_REVISION=0074
E: ID_SERIAL=Apple_Inc._Apple_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Apple_Inc.
E: ID_VENDOR_ENC=Apple\x20Inc.
E: ID_VENDOR_ID=05ac
E: KEY=3a 0 e0000 0 0 0
E: MODALIAS=input:b0003v05ACp024Fe0111-e0,1,4,k71,72,73,A1,A3,A4,A5,ram4,lsfw
E: MSC=10
E: NAME="Apple Inc. Apple Keyboard"
E: PHYS="usb-0001:01:0b.2-1.2/input1"
E: PRODUCT=3/5ac/24f/111
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=2299189
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0002/input/input1/event1
N: input/event1
S: input/by-id/usb-Apple_Inc._Apple_Keyboard-event-if01
S: input/by-path/pci-0001:01:0b.2-usb-0:1.2:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0001:01:0b.2-usb-0:1.2:1.1-event /dev/input/by-id/usb-Apple_Inc._Apple_Keyboard-event-if01
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AC:024F.0002/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Apple_Keyboard
E: ID_MODEL_ENC=Apple\x20Keyboard
E: ID_MODEL_ID=024f
E: ID_PATH=pci-0001:01:0b.2-usb-0:1.2:1.1
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_1_2_1_1
E: ID_REVISION=0074
E: ID_SERIAL=Apple_Inc._Apple_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Apple_Inc.
E: ID_VENDOR_ENC=Apple\x20Inc.
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18115377
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/input/input4
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/input/input4
E: EV=3
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0001_01_0b_2-usb-0_4_3_1_0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Altair_USB2.0_Camera
E: ID_MODEL_ENC=Altair\x20USB2.0\x20Camera
E: ID_MODEL_ID=3450
E: ID_PATH=pci-0001:01:0b.2-usb-0:4.3:1.0
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_4_3_1_0
E: ID_REVISION=01a2
E: ID_SERIAL=Vimicro_Corp._Altair_USB2.0_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Vimicro_Corp.
E: ID_VENDOR_ENC=Vimicro\x20Corp.
E: ID_VENDOR_ID=0ac8
E: KEY=100000 0 0 0 0 0 0
E: MODALIAS=input:b0003v0AC8p3450e01A2-e0,1,kD4,ramlsfw
E: NAME="Altair USB2.0 Camera"
E: PHYS="usb-0001:01:0b.2-4.3/button"
E: PRODUCT=3/ac8/3450/1a2
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=19525490
P: /devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/input/input4/event4
N: input/event4
S: input/by-id/usb-Vimicro_Corp._Altair_USB2.0_Camera-event-if00
S: input/by-path/pci-0001:01:0b.2-usb-0:4.3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0001:01:0b.2-usb-0:4.3:1.0-event /dev/input/by-id/usb-Vimicro_Corp._Altair_USB2.0_Camera-event-if00
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0001:00/0001:00:08.0/0001:01:0b.2/usb1/1-4/1-4.3/1-4.3:1.0/input/input4/event4
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Altair_USB2.0_Camera
E: ID_MODEL_ENC=Altair\x20USB2.0\x20Camera
E: ID_MODEL_ID=3450
E: ID_PATH=pci-0001:01:0b.2-usb-0:4.3:1.0
E: ID_PATH_TAG=pci-0001_01_0b_2-usb-0_4_3_1_0
E: ID_REVISION=01a2
E: ID_SERIAL=Vimicro_Corp._Altair_USB2.0_Camera
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Vimicro_Corp.
E: ID_VENDOR_ENC=Vimicro\x20Corp.
E: ID_VENDOR_ID=0ac8
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=19614976
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 0.000000] Kernel command line: root=UUID=dc2a2a06-9146-4a6f-b813-760477b485a5 ro video=offb:off nouveau.modeset=1 nouveau.noaccel=1 radeon.modeset=1 radeon.agpmode=-1 fastboot loglevel=3
[ 0.879099] Linux agpgart interface v0.103
[ 16.606802] [drm] Initialized drm 1.1.0 20060810
[ 17.722537] nouveau E[ DRM] failed to create 0x00000080, -22
[ 19.340107] [drm] radeon kernel modesetting enabled.
[ 19.481218] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x174B:0xE101).
[ 19.481290] [drm] register mmio base: 0xB0020000
[ 19.481292] [drm] register mmio size: 65536
[ 19.599540] [drm] GPU not posted. posting now...
[ 19.601145] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 19.601147] [drm] RAM width 128bits DDR
[ 19.601363] [drm] radeon: 1024M of VRAM memory ready
[ 19.601365] [drm] radeon: 1024M of GTT memory ready.
[ 19.601391] [drm] Loading RV730 Microcode
[ 19.673136] [drm] Internal thermal controller with fan control
[ 19.678816] [drm] radeon: dpm initialized
[ 19.712361] [drm] GART: num cpu pages 16384, num gpu pages 262144
[ 19.753465] [drm] PCIE GART of 1024M enabled (table at 0x0000000000260000).
[ 19.755082] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.755084] [drm] Driver supports precise vblank timestamp query.
[ 19.755197] [drm] radeon: irq initialized.
[ 19.801559] [drm] ring test on 0 succeeded in 0 usecs
[ 19.801569] [drm] ring test on 3 succeeded in 2 usecs
[ 19.975900] [drm] ring test on 5 succeeded in 1 usecs
[ 19.975911] [drm] UVD initialized successfully.
[ 19.976142] [drm] ib test on ring 0 succeeded in 0 usecs
[ 19.976172] [drm] ib test on ring 3 succeeded in 0 usecs
[ 20.623991] [drm] ib test on ring 5 succeeded
[ 20.626516] [drm] Radeon Display Connectors
[ 20.626522] [drm] Connector 0:
[ 20.626524] [drm] VGA-1
[ 20.626527] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 20.626529] [drm] Encoders:
[ 20.626531] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 20.626533] [drm] Connector 1:
[ 20.626534] [drm] HDMI-A-1
[ 20.626536] [drm] HPD2
[ 20.626539] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 20.626540] [drm] Encoders:
[ 20.626542] [drm] DFP2: INTERNAL_UNIPHY1
[ 20.626544] [drm] Connector 2:
[ 20.626546] [drm] DVI-I-1
[ 20.626548] [drm] HPD1
[ 20.626550] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 20.626551] [drm] Encoders:
[ 20.626553] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 20.626555] [drm] DFP1: INTERNAL_UNIPHY
[ 20.679630] [drm] fb mappable at 0xA0470000
[ 20.679634] [drm] vram apper at 0xA0000000
[ 20.679636] [drm] size 7340032
[ 20.679638] [drm] fb depth is 24
[ 20.679640] [drm] pitch is 6912
[ 20.705771] radeon 0000:0a:00.0: fb0: radeondrmfb frame buffer device
[ 20.732798] [drm] Initialized radeon 2.43.0 20080528 for 0000:0a:00.0 on minor 0
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc64)
Kernel: Linux 4.2.0-1-powerpc64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages xserver-xorg-video-ati depends on:
ii libc6 2.19-22
ii libpciaccess0 0.13.4-1
ii xserver-xorg-core [xorg-video-abi-19] 2:1.17.2-3
ii xserver-xorg-video-mach64 6.9.5-1
ii xserver-xorg-video-r128 6.10.0-1
ii xserver-xorg-video-radeon 1:7.5.0-1+b1
xserver-xorg-video-ati recommends no packages.
xserver-xorg-video-ati suggests no packages.
-- no debconf information
Reply to: