Your message dated Sun, 18 Aug 2013 03:04:48 +0200 with message-id <20130818010448.GA25127@betterave.cristau.org> and subject line Re: Bug#651623: intel_uxa_prepare_access: bo map failed: Cannot allocate memory has caused the Debian Bug report #651623, regarding intel_uxa_prepare_access: bo map failed: Cannot allocate memory to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 651623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651623 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: intel_uxa_prepare_access: bo map failed: Cannot allocate memory
- From: Roman Sakal <sakalr@gmail.com>
- Date: Sat, 10 Dec 2011 20:50:50 +0300
- Message-id: <4ee38ded.cd020e0a.49b7.ffffe79f@mx.google.com>
Package: xserver-xorg-video-intel Version: 2:2.17.0-1 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** Content-Type: multipart/mixed; boundary="===============0508400312==" MIME-Version: 1.0 From: Roman Sakal <sakalr@gmail.com> To: Debian Bug Tracking System <submit@bugs.debian.org> Subject: intel_uxa_prepare_access: bo map failed: Cannot allocate memory Message-ID: <20111210163337.20000.77239.reportbug@.loc> X-Mailer: reportbug 6.3.1 Date: Sat, 10 Dec 2011 20:33:37 +0300 This is a multi-part MIME message sent by reportbug. --===============0508400312== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline Package: xserver-xorg-video-intel Version: 2:2.17.0-1 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate *** * Tomorrow I update system and leave my notebook powered. At a morning I found screen * corrupted. Every control in any application has a pixel noise. * I reboot X Server, but after a hour (it not important) pixel noises * come back. Then I reboot the system. After a few hourse it come again. * I said, that when I use google picasa it's bug can be reproduced some * eays. -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Sep 2 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2048200 Nov 29 21:08 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. KMS configuration files: ------------------------ /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.1.0-1-686-pae (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Tue Nov 29 19:01:56 UTC 2011 Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 45920 Dec 10 20:20 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 123.780] X.Org X Server 1.11.2.901 (1.11.3 RC 1) Release Date: 2011-11-28 [ 123.799] X Protocol Version 11, Revision 0 [ 123.799] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian [ 123.799] Current Operating System: Linux serenity 3.1.0-1-686-pae #1 SMP Tue Nov 29 19:01:56 UTC 2011 i686 [ 123.799] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=a6d0c0df-fe6c-4d2d-b003-70b7d25b6aa3 ro quiet [ 123.799] Build Date: 29 November 2011 05:01:50PM [ 123.799] xorg-server 2:1.11.2.901-1 (Cyril Brulebois <kibi@debian.org>) [ 123.800] Current version of pixman: 0.24.0 [ 123.800] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 123.800] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 123.800] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 10 17:15:51 2011 [ 123.909] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 124.035] (==) No Layout section. Using the first Screen section. [ 124.035] (==) No screen section available. Using defaults. [ 124.035] (**) |-->Screen "Default Screen Section" (0) [ 124.035] (**) | |-->Monitor "<default monitor>" [ 124.174] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 124.174] (==) Automatically adding devices [ 124.174] (==) Automatically enabling devices [ 124.414] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 124.414] (==) ModulePath set to "/usr/lib/xorg/modules" [ 124.414] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 124.431] (II) Loader magic: 0xb77e7580 [ 124.431] (II) Module ABI versions: [ 124.431] X.Org ANSI C Emulation: 0.4 [ 124.431] X.Org Video Driver: 11.0 [ 124.431] X.Org XInput driver : 13.0 [ 124.431] X.Org Server Extension : 6.0 [ 124.432] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30ad rev 3, Mem @ 0xf4600000/524288, 0xe0000000/268435456, 0xf4680000/262144, I/O @ 0x00004000/8 [ 124.432] (--) PCI: (0:0:2:1) 8086:27a6:103c:30ad rev 3, Mem @ 0xf4700000/524288 [ 124.432] (II) Open ACPI successful (/var/run/acpid.socket) [ 124.432] (II) LoadModule: "extmod" [ 124.659] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 124.677] (II) Module extmod: vendor="X.Org Foundation" [ 124.677] compiled for 1.11.2.901, module version = 1.0.0 [ 124.677] Module class: X.Org Server Extension [ 124.677] ABI class: X.Org Server Extension, version 6.0 [ 124.677] (II) Loading extension SELinux [ 124.677] (II) Loading extension MIT-SCREEN-SAVER [ 124.677] (II) Loading extension XFree86-VidModeExtension [ 124.677] (II) Loading extension XFree86-DGA [ 124.677] (II) Loading extension DPMS [ 124.677] (II) Loading extension XVideo [ 124.677] (II) Loading extension XVideo-MotionCompensation [ 124.677] (II) Loading extension X-Resource [ 124.677] (II) LoadModule: "dbe" [ 124.677] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 124.693] (II) Module dbe: vendor="X.Org Foundation" [ 124.693] compiled for 1.11.2.901, module version = 1.0.0 [ 124.693] Module class: X.Org Server Extension [ 124.693] ABI class: X.Org Server Extension, version 6.0 [ 124.693] (II) Loading extension DOUBLE-BUFFER [ 124.693] (II) LoadModule: "glx" [ 124.693] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 124.978] (II) Module glx: vendor="X.Org Foundation" [ 124.978] compiled for 1.11.2.901, module version = 1.0.0 [ 124.978] ABI class: X.Org Server Extension, version 6.0 [ 124.978] (==) AIGLX enabled [ 124.979] (II) Loading extension GLX [ 124.979] (II) LoadModule: "record" [ 124.979] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 125.025] (II) Module record: vendor="X.Org Foundation" [ 125.025] compiled for 1.11.2.901, module version = 1.13.0 [ 125.025] Module class: X.Org Server Extension [ 125.025] ABI class: X.Org Server Extension, version 6.0 [ 125.025] (II) Loading extension RECORD [ 125.025] (II) LoadModule: "dri" [ 125.025] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 125.145] (II) Module dri: vendor="X.Org Foundation" [ 125.145] compiled for 1.11.2.901, module version = 1.0.0 [ 125.145] ABI class: X.Org Server Extension, version 6.0 [ 125.145] (II) Loading extension XFree86-DRI [ 125.145] (II) LoadModule: "dri2" [ 125.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 125.198] (II) Module dri2: vendor="X.Org Foundation" [ 125.198] compiled for 1.11.2.901, module version = 1.2.0 [ 125.198] ABI class: X.Org Server Extension, version 6.0 [ 125.198] (II) Loading extension DRI2 [ 125.198] (==) Matched intel as autoconfigured driver 0 [ 125.198] (==) Matched vesa as autoconfigured driver 1 [ 125.198] (==) Matched fbdev as autoconfigured driver 2 [ 125.198] (==) Assigned the driver to the xf86ConfigLayout [ 125.198] (II) LoadModule: "intel" [ 125.199] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 125.561] (II) Module intel: vendor="X.Org Foundation" [ 125.561] compiled for 1.11.1.902, module version = 2.17.0 [ 125.562] Module class: X.Org Video Driver [ 125.562] ABI class: X.Org Video Driver, version 11.0 [ 125.562] (II) LoadModule: "vesa" [ 125.562] (WW) Warning, couldn't open module vesa [ 125.562] (II) UnloadModule: "vesa" [ 125.562] (II) Unloading vesa [ 125.562] (EE) Failed to load module "vesa" (module does not exist, 0) [ 125.562] (II) LoadModule: "fbdev" [ 125.562] (WW) Warning, couldn't open module fbdev [ 125.562] (II) UnloadModule: "fbdev" [ 125.562] (II) Unloading fbdev [ 125.562] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 125.562] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 125.563] (++) using VT number 7 [ 125.786] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 125.786] drmOpenDevice: node name is /dev/dri/card0 [ 125.786] drmOpenDevice: open result is 9, (OK) [ 125.786] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 125.786] drmOpenDevice: node name is /dev/dri/card0 [ 125.786] drmOpenDevice: open result is 9, (OK) [ 125.786] drmOpenByBusid: drmOpenMinor returns 9 [ 125.786] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 125.786] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 125.786] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 125.786] (==) intel(0): RGB weight 888 [ 125.786] (==) intel(0): Default visual is TrueColor [ 125.786] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM [ 125.786] (--) intel(0): Chipset: "945GM" [ 125.786] (**) intel(0): Relaxed fencing disabled [ 125.786] (**) intel(0): Wait on SwapBuffers? enabled [ 125.786] (**) intel(0): Triple buffering? enabled [ 125.786] (**) intel(0): Framebuffer tiled [ 125.786] (**) intel(0): Pixmaps tiled [ 125.786] (**) intel(0): 3D buffers tiled [ 125.786] (**) intel(0): SwapBuffers wait enabled [ 125.786] (==) intel(0): video overlay key set to 0x101fe [ 125.786] (II) intel(0): Output LVDS1 has no monitor section [ 125.787] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 125.852] (II) intel(0): Output VGA1 has no monitor section [ 125.868] (II) intel(0): Output DVI1 has no monitor section [ 125.868] (II) intel(0): Output TV1 has no monitor section [ 125.868] (II) intel(0): EDID for output LVDS1 [ 125.868] (II) intel(0): Manufacturer: QDS Model: 53 Serial#: 0 [ 125.868] (II) intel(0): Year: 2005 Week: 0 [ 125.868] (II) intel(0): EDID Version: 1.3 [ 125.868] (II) intel(0): Digital Display Input [ 125.868] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 125.868] (II) intel(0): Gamma: 2.20 [ 125.868] (II) intel(0): No DPMS capabilities specified [ 125.868] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 125.868] (II) intel(0): First detailed timing is preferred mode [ 125.868] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.314 greenY: 0.550 [ 125.868] (II) intel(0): blueX: 0.154 blueY: 0.135 whiteX: 0.312 whiteY: 0.328 [ 125.868] (II) intel(0): Manufacturer's mask: 0 [ 125.868] (II) intel(0): Supported detailed timing: [ 125.868] (II) intel(0): clock: 68.9 MHz Image Size: 304 x 190 mm [ 125.868] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 [ 125.868] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 [ 125.868] (II) intel(0): Unknown vendor-specific block f [ 125.868] (II) intel(0): QUANTADISPLAY [ 125.868] (II) intel(0): QD14TL025 [ 125.868] (II) intel(0): EDID (in hex): [ 125.868] (II) intel(0): 00ffffffffffff004493530000000000 [ 125.868] (II) intel(0): 000f0103801e13780a3ba09355508c27 [ 125.868] (II) intel(0): 22505400000001010101010101010101 [ 125.868] (II) intel(0): 010101010101ea1a0080502010301520 [ 125.868] (II) intel(0): 440030be100000180000000f0008002a [ 125.868] (II) intel(0): 0001000400324a041901000000fe0051 [ 125.868] (II) intel(0): 55414e5441444953504c4159000000fe [ 125.868] (II) intel(0): 0051443134544c3032350a20202000e0 [ 125.868] (II) intel(0): EDID vendor "QDS", prod id 83 [ 125.868] (II) intel(0): Printing DDC gathered Modelines: [ 125.868] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 125.869] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 125.869] (II) intel(0): Printing probed modes for output LVDS1 [ 125.869] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 125.869] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 125.869] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 125.869] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 125.869] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 125.928] (II) intel(0): EDID for output VGA1 [ 125.928] (II) intel(0): Manufacturer: ACR Model: ad46 Serial#: 0 [ 125.928] (II) intel(0): Year: 2006 Week: 21 [ 125.928] (II) intel(0): EDID Version: 1.3 [ 125.928] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 125.928] (II) intel(0): Sync: Separate [ 125.928] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 125.928] (II) intel(0): Gamma: 2.20 [ 125.928] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 125.928] (II) intel(0): First detailed timing not preferred mode in violation of standard! [ 125.928] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617 [ 125.928] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 [ 125.928] (II) intel(0): Supported established timings: [ 125.928] (II) intel(0): 720x400@70Hz [ 125.928] (II) intel(0): 640x480@60Hz [ 125.928] (II) intel(0): 640x480@67Hz [ 125.928] (II) intel(0): 640x480@72Hz [ 125.928] (II) intel(0): 640x480@75Hz [ 125.928] (II) intel(0): 800x600@56Hz [ 125.928] (II) intel(0): 800x600@60Hz [ 125.928] (II) intel(0): 800x600@72Hz [ 125.928] (II) intel(0): 800x600@75Hz [ 125.928] (II) intel(0): 832x624@75Hz [ 125.928] (II) intel(0): 1024x768@60Hz [ 125.928] (II) intel(0): 1024x768@70Hz [ 125.928] (II) intel(0): 1024x768@75Hz [ 125.928] (II) intel(0): 1280x1024@75Hz [ 125.928] (II) intel(0): Manufacturer's mask: 0 [ 125.928] (II) intel(0): Supported detailed timing: [ 125.928] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 125.928] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 125.928] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 125.928] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz [ 125.928] (II) intel(0): Serial No: 6210BB7C4018 [ 125.928] (II) intel(0): Monitor name: AL1716A [ 125.928] (II) intel(0): EDID (in hex): [ 125.928] (II) intel(0): 00ffffffffffff00047246ad00000000 [ 125.928] (II) intel(0): 1510010308221b78e8dc55a359489e24 [ 125.928] (II) intel(0): 115054bfef0001010101010101010101 [ 125.928] (II) intel(0): 010101010101302a009851002a403070 [ 125.928] (II) intel(0): 1300520e1100001e000000fd00384b1e [ 125.928] (II) intel(0): 530e000a202020202020000000ff0036 [ 125.928] (II) intel(0): 32313042423743343031380a000000fc [ 125.928] (II) intel(0): 00414c31373136410a2020202020008d [ 125.928] (II) intel(0): Printing probed modes for output VGA1 [ 125.928] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 125.928] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 125.928] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 125.929] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 125.945] (II) intel(0): EDID for output DVI1 [ 125.945] (II) intel(0): EDID for output TV1 [ 125.945] (II) intel(0): Printing probed modes for output TV1 [ 125.945] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849 912 944 480 481 512 513 (15.4 kHz) [ 125.945] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641 704 736 480 481 512 513 (15.4 kHz) [ 125.945] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024 1025 1088 1120 768 769 800 801 (24.0 kHz) [ 125.945] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801 864 896 600 601 632 633 (19.0 kHz) [ 125.945] (II) intel(0): Output LVDS1 connected [ 125.945] (II) intel(0): Output VGA1 connected [ 125.945] (II) intel(0): Output DVI1 disconnected [ 125.945] (II) intel(0): Output TV1 disconnected [ 125.945] (II) intel(0): Using fuzzy aspect match for initial modes [ 125.945] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 125.945] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 125.945] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 125.945] (II) intel(0): Kernel page flipping support detected, enabling [ 125.945] (**) intel(0): Display dimensions: (300, 190) mm [ 125.945] (**) intel(0): DPI set to (86, 102) [ 125.945] (II) Loading sub module "fb" [ 125.945] (II) LoadModule: "fb" [ 125.945] (II) Loading /usr/lib/xorg/modules/libfb.so [ 125.993] (II) Module fb: vendor="X.Org Foundation" [ 125.993] compiled for 1.11.2.901, module version = 1.0.0 [ 125.993] ABI class: X.Org ANSI C Emulation, version 0.4 [ 125.993] (II) Loading sub module "dri2" [ 125.994] (II) LoadModule: "dri2" [ 125.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 125.994] (II) Module dri2: vendor="X.Org Foundation" [ 125.994] compiled for 1.11.2.901, module version = 1.2.0 [ 125.994] ABI class: X.Org Server Extension, version 6.0 [ 125.994] (==) Depth 24 pixmap format is 32 bpp [ 125.994] (II) intel(0): [DRI2] Setup complete [ 125.994] (II) intel(0): [DRI2] DRI driver: i915 [ 125.994] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 126.247] (II) UXA(0): Driver registered support for the following operations: [ 126.247] (II) solid [ 126.247] (II) copy [ 126.247] (II) composite (RENDER acceleration) [ 126.247] (II) put_image [ 126.247] (II) get_image [ 126.247] (==) intel(0): Backing store disabled [ 126.247] (==) intel(0): Silken mouse enabled [ 126.270] (II) intel(0): Initializing HW Cursor [ 127.075] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 127.077] (==) intel(0): DPMS enabled [ 127.077] (==) intel(0): Intel XvMC decoder disabled [ 127.077] (II) intel(0): Set up textured video [ 127.077] (II) intel(0): Set up overlay video [ 127.077] (II) intel(0): direct rendering: DRI2 Enabled [ 127.077] (==) intel(0): hotplug detection: "enabled" [ 127.078] (--) RandR disabled [ 127.078] (II) Initializing built-in extension Generic Event Extension [ 127.078] (II) Initializing built-in extension SHAPE [ 127.078] (II) Initializing built-in extension MIT-SHM [ 127.078] (II) Initializing built-in extension XInputExtension [ 127.078] (II) Initializing built-in extension XTEST [ 127.078] (II) Initializing built-in extension BIG-REQUESTS [ 127.078] (II) Initializing built-in extension SYNC [ 127.078] (II) Initializing built-in extension XKEYBOARD [ 127.078] (II) Initializing built-in extension XC-MISC [ 127.078] (II) Initializing built-in extension SECURITY [ 127.078] (II) Initializing built-in extension XINERAMA [ 127.078] (II) Initializing built-in extension XFIXES [ 127.078] (II) Initializing built-in extension RENDER [ 127.078] (II) Initializing built-in extension RANDR [ 127.078] (II) Initializing built-in extension COMPOSITE [ 127.078] (II) Initializing built-in extension DAMAGE [ 127.078] (II) SELinux: Disabled on system [ 127.797] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 127.797] (II) AIGLX: enabled GLX_INTEL_swap_event [ 127.797] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 127.797] (II) AIGLX: enabled GLX_SGI_make_current_read [ 127.797] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 127.797] (II) AIGLX: Loaded and initialized i915 [ 127.797] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 127.798] (II) intel(0): Setting screen physical size to 270 x 203 [ 130.488] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 130.488] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 130.488] (II) LoadModule: "evdev" [ 130.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.572] (II) Module evdev: vendor="X.Org Foundation" [ 130.572] compiled for 1.11.0, module version = 2.6.0 [ 130.572] Module class: X.Org XInput Driver [ 130.572] ABI class: X.Org XInput driver, version 13.0 [ 130.572] (II) Using input driver 'evdev' for 'Power Button' [ 130.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.572] (**) Power Button: always reports core events [ 130.572] (**) Power Button: Device: "/dev/input/event5" [ 130.572] (--) Power Button: Found keys [ 130.572] (II) Power Button: Configuring as keyboard [ 130.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 130.572] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 130.572] (**) Option "xkb_rules" "evdev" [ 130.572] (**) Option "xkb_model" "pc105" [ 130.572] (**) Option "xkb_layout" "us,ru" [ 130.572] (**) Option "xkb_variant" "," [ 130.572] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.739] (II) config/udev: Adding input device Video Bus (/dev/input/event1) [ 130.739] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 130.739] (II) Using input driver 'evdev' for 'Video Bus' [ 130.739] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.739] (**) Video Bus: always reports core events [ 130.739] (**) Video Bus: Device: "/dev/input/event1" [ 130.739] (--) Video Bus: Found keys [ 130.739] (II) Video Bus: Configuring as keyboard [ 130.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1" [ 130.739] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 130.739] (**) Option "xkb_rules" "evdev" [ 130.739] (**) Option "xkb_model" "pc105" [ 130.739] (**) Option "xkb_layout" "us,ru" [ 130.739] (**) Option "xkb_variant" "," [ 130.739] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.740] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 130.740] (II) No input driver/identifier specified (ignoring) [ 130.740] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 130.740] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 130.740] (II) Using input driver 'evdev' for 'Sleep Button' [ 130.740] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.740] (**) Sleep Button: always reports core events [ 130.740] (**) Sleep Button: Device: "/dev/input/event3" [ 130.740] (--) Sleep Button: Found keys [ 130.740] (II) Sleep Button: Configuring as keyboard [ 130.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 130.740] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 130.740] (**) Option "xkb_rules" "evdev" [ 130.740] (**) Option "xkb_model" "pc105" [ 130.740] (**) Option "xkb_layout" "us,ru" [ 130.740] (**) Option "xkb_variant" "," [ 130.740] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.741] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 130.741] (II) No input driver/identifier specified (ignoring) [ 130.741] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 130.741] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 130.741] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 130.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.741] (**) AT Translated Set 2 keyboard: always reports core events [ 130.741] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 130.741] (--) AT Translated Set 2 keyboard: Found keys [ 130.741] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 130.741] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 130.742] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 130.742] (**) Option "xkb_rules" "evdev" [ 130.742] (**) Option "xkb_model" "pc105" [ 130.742] (**) Option "xkb_layout" "us,ru" [ 130.742] (**) Option "xkb_variant" "," [ 130.742] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 130.742] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 130.742] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 130.742] (II) LoadModule: "synaptics" [ 130.742] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 130.879] (II) Module synaptics: vendor="X.Org Foundation" [ 130.879] compiled for 1.11.1.902, module version = 1.5.0 [ 130.879] Module class: X.Org XInput Driver [ 130.879] ABI class: X.Org XInput driver, version 13.0 [ 130.879] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 130.879] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 130.879] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 130.879] (**) Option "Device" "/dev/input/event7" [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 130.884] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 130.900] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7" [ 130.900] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10) [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 130.900] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 130.900] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 130.900] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 130.901] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10) [ 130.901] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 130.901] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 130.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.901] (**) PS/2 Generic Mouse: always reports core events [ 130.901] (**) PS/2 Generic Mouse: Device: "/dev/input/event10" [ 130.901] (--) PS/2 Generic Mouse: Found 3 mouse buttons [ 130.901] (--) PS/2 Generic Mouse: Found relative axes [ 130.901] (--) PS/2 Generic Mouse: Found x and y relative axes [ 130.901] (II) PS/2 Generic Mouse: Configuring as mouse [ 130.901] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 130.901] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 130.901] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input10/event10" [ 130.901] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11) [ 130.901] (II) PS/2 Generic Mouse: initialized for relative axes. [ 130.901] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 130.902] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device PC Speaker (/dev/input/event2) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.903] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event11) [ 130.903] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 130.903] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 130.903] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.903] (**) ACPI Virtual Keyboard Device: always reports core events [ 130.903] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event11" [ 130.903] (--) ACPI Virtual Keyboard Device: Found keys [ 130.903] (II) ACPI Virtual Keyboard Device: Configuring as keyboard [ 130.903] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11" [ 130.903] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12) [ 130.903] (**) Option "xkb_rules" "evdev" [ 130.903] (**) Option "xkb_model" "pc105" [ 130.903] (**) Option "xkb_layout" "us,ru" [ 130.903] (**) Option "xkb_variant" "," [ 130.903] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.904] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6) [ 130.904] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 130.904] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 130.904] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.904] (**) HP WMI hotkeys: always reports core events [ 130.904] (**) HP WMI hotkeys: Device: "/dev/input/event6" [ 130.904] (--) HP WMI hotkeys: Found keys [ 130.904] (II) HP WMI hotkeys: Configuring as keyboard [ 130.904] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6" [ 130.904] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 130.904] (**) Option "xkb_rules" "evdev" [ 130.904] (**) Option "xkb_model" "pc105" [ 130.904] (**) Option "xkb_layout" "us,ru" [ 130.904] (**) Option "xkb_variant" "," [ 130.904] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 340.311] (II) intel(0): EDID vendor "QDS", prod id 83 [ 340.311] (II) intel(0): Printing DDC gathered Modelines: [ 340.311] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 340.394] (WW) intel(0): Failed to set tiling on frontbuffer. [ 340.394] (II) intel(0): Allocated new frame buffer 2560x800 stride 10240, untiled [ 341.120] (II) intel(0): EDID vendor "QDS", prod id 83 [ 341.120] (II) intel(0): Printing DDC gathered Modelines: [ 341.120] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 341.198] (WW) intel(0): Failed to set tiling on frontbuffer. [ 341.198] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [ 341.340] (II) intel(0): EDID vendor "QDS", prod id 83 [ 341.340] (II) intel(0): Printing DDC gathered Modelines: [ 341.340] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 365.736] (II) intel(0): EDID vendor "QDS", prod id 83 [ 365.741] (II) intel(0): Printing DDC gathered Modelines: [ 365.741] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 400.260] (II) intel(0): EDID vendor "QDS", prod id 83 [ 400.260] (II) intel(0): Printing DDC gathered Modelines: [ 400.260] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 421.760] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2) [ 421.760] (II) No input driver/identifier specified (ignoring) [ 421.761] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12) [ 421.761] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall" [ 421.761] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse' [ 421.761] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 421.761] (**) Bluetooth Laser Travel Mouse: always reports core events [ 421.761] (**) Bluetooth Laser Travel Mouse: Device: "/dev/input/event12" [ 421.761] (--) Bluetooth Laser Travel Mouse: Found 12 mouse buttons [ 421.761] (--) Bluetooth Laser Travel Mouse: Found scroll wheel(s) [ 421.761] (--) Bluetooth Laser Travel Mouse: Found relative axes [ 421.761] (--) Bluetooth Laser Travel Mouse: Found x and y relative axes [ 421.761] (II) Bluetooth Laser Travel Mouse: Configuring as mouse [ 421.761] (II) Bluetooth Laser Travel Mouse: Adding scrollwheel support [ 421.761] (**) Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5 [ 421.761] (**) Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 421.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12" [ 421.761] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 14) [ 421.761] (II) Bluetooth Laser Travel Mouse: initialized for relative axes. [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1 [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0 [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000 [ 421.762] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4 [ 6946.842] (II) intel(0): EDID vendor "QDS", prod id 83 [ 6946.842] (II) intel(0): Printing DDC gathered Modelines: [ 6946.842] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 6950.043] (II) intel(0): EDID vendor "QDS", prod id 83 [ 6950.043] (II) intel(0): Printing DDC gathered Modelines: [ 6950.043] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 11008.559] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11010.747] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.572] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11016.581] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.922] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.923] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.927] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.927] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.112] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.418] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.430] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.565] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.605] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.628] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.632] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.647] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.648] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.279] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.288] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.301] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.310] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11062.774] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11062.786] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11064.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.521] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.700] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.700] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.853] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.280] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.320] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.469] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.617] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.886] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.900] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.921] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.215] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.293] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.621] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.622] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11071.081] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.052] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.079] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.652] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.679] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.281] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.853] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.881] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.940] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.817] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.646] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11102.038] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11222.762] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8839058 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280635 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b 0 0 0 0 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8707663 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1 N: input/event1 E: BACKSPACE=guess E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280030 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 E: EV=21 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: UDEV_LOG=3 E: USEC_INITIALIZED=8838291 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 N: input/event4 E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8853481 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8837475 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280355 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/pci0000:00/0000:00:1b.0/input/input9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v11D4p1981e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/11d4/1981/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=11570785 P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=11575957 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12 E: EV=17 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: KEY=ff0000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0005v046DpB008e0314-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,6,8,am4,lsfw E: MSC=10 E: NAME="Bluetooth Laser Travel Mouse" E: PHYS="00:1A:6B:23:1D:36" E: PRODUCT=5/46d/b008/314 E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: UDEV_LOG=3 E: UNIQ="00:07:61:BA:14:38" E: USEC_INITIALIZED=421755306 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=421760988 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/mouse2 N: input/mouse2 E: DEVNAME=/dev/input/mouse2 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/mouse2 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: MAJOR=13 E: MINOR=34 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=421760032 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=500f 2300002 3803078 f910d401 feffffdf ffefffff ffffffff fffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,94,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D4,D5,D9,E0,E1,E2,E3,EC,EE,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8506997 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280411 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/platform/i8042/serio4/input/input7 E: ABS=11000003 E: DEVPATH=/devices/platform/i8042/serio4/input/input7 E: EV=b E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: KEY=6420 0 30000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio4/input0" E: PRODUCT=11/2/7/25b1 E: PROP=1 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9521112 P: /devices/platform/i8042/serio4/input/input7/event7 N: input/event7 S: input/by-path/platform-i8042-serio-4-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/i8042/serio4/input/input7/event7 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9583100 P: /devices/platform/i8042/serio4/input/input7/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-4-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio4/input/input7/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9582511 P: /devices/platform/i8042/serio4/serio5/input/input10 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10 E: EV=7 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: KEY=70000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0001e0000-e0,1,2,k110,111,112,r0,1,amlsfw E: NAME="PS/2 Generic Mouse" E: PHYS="synaptics-pt/serio0/input0" E: PRODUCT=11/2/1/0 E: PROP=0 E: REL=3 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15082724 P: /devices/platform/i8042/serio4/serio5/input/input10/event10 N: input/event10 S: input/by-path/platform-i8042-serio-5-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-event-mouse E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10/event10 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15085657 P: /devices/platform/i8042/serio4/serio5/input/input10/mouse1 N: input/mouse1 S: input/by-path/platform-i8042-serio-5-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10/mouse1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15085867 P: /devices/platform/lis3lv02d/input/input8 E: ABS=7 E: DEVPATH=/devices/platform/lis3lv02d/input/input8 E: EV=9 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw E: NAME="ST LIS3LV02DL Accelerometer" E: PHYS="lis3lv02d/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9963758 P: /devices/platform/lis3lv02d/input/input8/event8 N: input/event8 S: input/by-path/platform-lis3lv02d-event E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/platform/lis3lv02d/input/input8/event8 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9967847 P: /devices/platform/lis3lv02d/input/input8/js0 N: input/js0 E: DEVNAME=/dev/input/js0 E: DEVPATH=/devices/platform/lis3lv02d/input/input8/js0 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MAJOR=13 E: MINOR=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9967802 P: /devices/platform/pcspkr/input/input2 E: DEVPATH=/devices/platform/pcspkr/input/input2 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8835073 P: /devices/platform/pcspkr/input/input2/event2 N: input/event2 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/platform/pcspkr/input/input2/event2 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8848892 P: /devices/virtual/input/input11 E: DEVPATH=/devices/virtual/input/input11 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=89662102 P: /devices/virtual/input/input11/event11 N: input/event11 E: BACKSPACE=guess E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/virtual/input/input11/event11 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=89665165 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/virtual/input/input6 E: DEVPATH=/devices/virtual/input/input6 E: EV=33 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=40 0 0 0 10007 0 0 2100400 0 0 0 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5, E: MSC=10 E: NAME="HP WMI hotkeys" E: PHYS="wmi/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=22 E: UDEV_LOG=3 E: USEC_INITIALIZED=9426030 P: /devices/virtual/input/input6/event6 N: input/event6 E: BACKSPACE=guess E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/virtual/input/input6/event6 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9428536 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, DRM Information from dmesg: --------------------------- [ 1.097841] Linux agpgart interface v0.103 [ 1.097972] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.098061] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.098564] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.098720] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 9.825420] [drm] Initialized drm 1.1.0 20060810 [ 10.159872] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.159876] [drm] Driver supports precise vblank timestamp query. [ 10.681784] [drm] initialized overlay support [ 10.924580] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 10.925214] fbcon: inteldrmfb (fb0) is primary device [ 11.092406] fb0: inteldrmfb frame buffer device [ 11.092409] drm: registered panic notifier [ 11.098982] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.13-21 ii libdrm-intel1 2.4.28-1 ii libdrm2 2.4.28-1 ii libpciaccess0 0.12.1-2 ii libudev0 175-3 ii libx11-6 2:1.4.4-4 ii libx11-xcb1 2:1.4.4-4 ii libxcb-dri2-0 1.7-4 ii libxcb-util0 0.3.8-1 ii libxcb1 1.7-4 ii libxext6 2:1.3.0-3 ii libxfixes3 1:5.0-4 ii libxv1 2:1.0.6-2 ii libxvmc1 2:1.0.6-1 ii xserver-xorg-core [xorg-video-abi-11] 2:1.11.2.901-1 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information --===============0508400312== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="Xorg.0.log" [ 123.780] X.Org X Server 1.11.2.901 (1.11.3 RC 1) Release Date: 2011-11-28 [ 123.799] X Protocol Version 11, Revision 0 [ 123.799] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian [ 123.799] Current Operating System: Linux serenity 3.1.0-1-686-pae #1 SMP Tue Nov 29 19:01:56 UTC 2011 i686 [ 123.799] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=a6d0c0df-fe6c-4d2d-b003-70b7d25b6aa3 ro quiet [ 123.799] Build Date: 29 November 2011 05:01:50PM [ 123.799] xorg-server 2:1.11.2.901-1 (Cyril Brulebois <kibi@debian.org>) [ 123.800] Current version of pixman: 0.24.0 [ 123.800] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 123.800] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 123.800] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 10 17:15:51 2011 [ 123.909] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 124.035] (==) No Layout section. Using the first Screen section. [ 124.035] (==) No screen section available. Using defaults. [ 124.035] (**) |-->Screen "Default Screen Section" (0) [ 124.035] (**) | |-->Monitor "<default monitor>" [ 124.174] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 124.174] (==) Automatically adding devices [ 124.174] (==) Automatically enabling devices [ 124.414] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 124.414] (==) ModulePath set to "/usr/lib/xorg/modules" [ 124.414] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 124.431] (II) Loader magic: 0xb77e7580 [ 124.431] (II) Module ABI versions: [ 124.431] X.Org ANSI C Emulation: 0.4 [ 124.431] X.Org Video Driver: 11.0 [ 124.431] X.Org XInput driver : 13.0 [ 124.431] X.Org Server Extension : 6.0 [ 124.432] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30ad rev 3, Mem @ 0xf4600000/524288, 0xe0000000/268435456, 0xf4680000/262144, I/O @ 0x00004000/8 [ 124.432] (--) PCI: (0:0:2:1) 8086:27a6:103c:30ad rev 3, Mem @ 0xf4700000/524288 [ 124.432] (II) Open ACPI successful (/var/run/acpid.socket) [ 124.432] (II) LoadModule: "extmod" [ 124.659] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 124.677] (II) Module extmod: vendor="X.Org Foundation" [ 124.677] compiled for 1.11.2.901, module version = 1.0.0 [ 124.677] Module class: X.Org Server Extension [ 124.677] ABI class: X.Org Server Extension, version 6.0 [ 124.677] (II) Loading extension SELinux [ 124.677] (II) Loading extension MIT-SCREEN-SAVER [ 124.677] (II) Loading extension XFree86-VidModeExtension [ 124.677] (II) Loading extension XFree86-DGA [ 124.677] (II) Loading extension DPMS [ 124.677] (II) Loading extension XVideo [ 124.677] (II) Loading extension XVideo-MotionCompensation [ 124.677] (II) Loading extension X-Resource [ 124.677] (II) LoadModule: "dbe" [ 124.677] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 124.693] (II) Module dbe: vendor="X.Org Foundation" [ 124.693] compiled for 1.11.2.901, module version = 1.0.0 [ 124.693] Module class: X.Org Server Extension [ 124.693] ABI class: X.Org Server Extension, version 6.0 [ 124.693] (II) Loading extension DOUBLE-BUFFER [ 124.693] (II) LoadModule: "glx" [ 124.693] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 124.978] (II) Module glx: vendor="X.Org Foundation" [ 124.978] compiled for 1.11.2.901, module version = 1.0.0 [ 124.978] ABI class: X.Org Server Extension, version 6.0 [ 124.978] (==) AIGLX enabled [ 124.979] (II) Loading extension GLX [ 124.979] (II) LoadModule: "record" [ 124.979] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 125.025] (II) Module record: vendor="X.Org Foundation" [ 125.025] compiled for 1.11.2.901, module version = 1.13.0 [ 125.025] Module class: X.Org Server Extension [ 125.025] ABI class: X.Org Server Extension, version 6.0 [ 125.025] (II) Loading extension RECORD [ 125.025] (II) LoadModule: "dri" [ 125.025] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 125.145] (II) Module dri: vendor="X.Org Foundation" [ 125.145] compiled for 1.11.2.901, module version = 1.0.0 [ 125.145] ABI class: X.Org Server Extension, version 6.0 [ 125.145] (II) Loading extension XFree86-DRI [ 125.145] (II) LoadModule: "dri2" [ 125.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 125.198] (II) Module dri2: vendor="X.Org Foundation" [ 125.198] compiled for 1.11.2.901, module version = 1.2.0 [ 125.198] ABI class: X.Org Server Extension, version 6.0 [ 125.198] (II) Loading extension DRI2 [ 125.198] (==) Matched intel as autoconfigured driver 0 [ 125.198] (==) Matched vesa as autoconfigured driver 1 [ 125.198] (==) Matched fbdev as autoconfigured driver 2 [ 125.198] (==) Assigned the driver to the xf86ConfigLayout [ 125.198] (II) LoadModule: "intel" [ 125.199] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 125.561] (II) Module intel: vendor="X.Org Foundation" [ 125.561] compiled for 1.11.1.902, module version = 2.17.0 [ 125.562] Module class: X.Org Video Driver [ 125.562] ABI class: X.Org Video Driver, version 11.0 [ 125.562] (II) LoadModule: "vesa" [ 125.562] (WW) Warning, couldn't open module vesa [ 125.562] (II) UnloadModule: "vesa" [ 125.562] (II) Unloading vesa [ 125.562] (EE) Failed to load module "vesa" (module does not exist, 0) [ 125.562] (II) LoadModule: "fbdev" [ 125.562] (WW) Warning, couldn't open module fbdev [ 125.562] (II) UnloadModule: "fbdev" [ 125.562] (II) Unloading fbdev [ 125.562] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 125.562] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 125.563] (++) using VT number 7 [ 125.786] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 125.786] drmOpenDevice: node name is /dev/dri/card0 [ 125.786] drmOpenDevice: open result is 9, (OK) [ 125.786] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 125.786] drmOpenDevice: node name is /dev/dri/card0 [ 125.786] drmOpenDevice: open result is 9, (OK) [ 125.786] drmOpenByBusid: drmOpenMinor returns 9 [ 125.786] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 125.786] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 125.786] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 125.786] (==) intel(0): RGB weight 888 [ 125.786] (==) intel(0): Default visual is TrueColor [ 125.786] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM [ 125.786] (--) intel(0): Chipset: "945GM" [ 125.786] (**) intel(0): Relaxed fencing disabled [ 125.786] (**) intel(0): Wait on SwapBuffers? enabled [ 125.786] (**) intel(0): Triple buffering? enabled [ 125.786] (**) intel(0): Framebuffer tiled [ 125.786] (**) intel(0): Pixmaps tiled [ 125.786] (**) intel(0): 3D buffers tiled [ 125.786] (**) intel(0): SwapBuffers wait enabled [ 125.786] (==) intel(0): video overlay key set to 0x101fe [ 125.786] (II) intel(0): Output LVDS1 has no monitor section [ 125.787] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 125.852] (II) intel(0): Output VGA1 has no monitor section [ 125.868] (II) intel(0): Output DVI1 has no monitor section [ 125.868] (II) intel(0): Output TV1 has no monitor section [ 125.868] (II) intel(0): EDID for output LVDS1 [ 125.868] (II) intel(0): Manufacturer: QDS Model: 53 Serial#: 0 [ 125.868] (II) intel(0): Year: 2005 Week: 0 [ 125.868] (II) intel(0): EDID Version: 1.3 [ 125.868] (II) intel(0): Digital Display Input [ 125.868] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 125.868] (II) intel(0): Gamma: 2.20 [ 125.868] (II) intel(0): No DPMS capabilities specified [ 125.868] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 125.868] (II) intel(0): First detailed timing is preferred mode [ 125.868] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.314 greenY: 0.550 [ 125.868] (II) intel(0): blueX: 0.154 blueY: 0.135 whiteX: 0.312 whiteY: 0.328 [ 125.868] (II) intel(0): Manufacturer's mask: 0 [ 125.868] (II) intel(0): Supported detailed timing: [ 125.868] (II) intel(0): clock: 68.9 MHz Image Size: 304 x 190 mm [ 125.868] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 [ 125.868] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 [ 125.868] (II) intel(0): Unknown vendor-specific block f [ 125.868] (II) intel(0): QUANTADISPLAY [ 125.868] (II) intel(0): QD14TL025 [ 125.868] (II) intel(0): EDID (in hex): [ 125.868] (II) intel(0): 00ffffffffffff004493530000000000 [ 125.868] (II) intel(0): 000f0103801e13780a3ba09355508c27 [ 125.868] (II) intel(0): 22505400000001010101010101010101 [ 125.868] (II) intel(0): 010101010101ea1a0080502010301520 [ 125.868] (II) intel(0): 440030be100000180000000f0008002a [ 125.868] (II) intel(0): 0001000400324a041901000000fe0051 [ 125.868] (II) intel(0): 55414e5441444953504c4159000000fe [ 125.868] (II) intel(0): 0051443134544c3032350a20202000e0 [ 125.868] (II) intel(0): EDID vendor "QDS", prod id 83 [ 125.868] (II) intel(0): Printing DDC gathered Modelines: [ 125.868] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 125.869] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 125.869] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 125.869] (II) intel(0): Printing probed modes for output LVDS1 [ 125.869] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 125.869] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 125.869] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 125.869] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 125.869] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 125.928] (II) intel(0): EDID for output VGA1 [ 125.928] (II) intel(0): Manufacturer: ACR Model: ad46 Serial#: 0 [ 125.928] (II) intel(0): Year: 2006 Week: 21 [ 125.928] (II) intel(0): EDID Version: 1.3 [ 125.928] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 125.928] (II) intel(0): Sync: Separate [ 125.928] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 125.928] (II) intel(0): Gamma: 2.20 [ 125.928] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 125.928] (II) intel(0): First detailed timing not preferred mode in violation of standard! [ 125.928] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617 [ 125.928] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 [ 125.928] (II) intel(0): Supported established timings: [ 125.928] (II) intel(0): 720x400@70Hz [ 125.928] (II) intel(0): 640x480@60Hz [ 125.928] (II) intel(0): 640x480@67Hz [ 125.928] (II) intel(0): 640x480@72Hz [ 125.928] (II) intel(0): 640x480@75Hz [ 125.928] (II) intel(0): 800x600@56Hz [ 125.928] (II) intel(0): 800x600@60Hz [ 125.928] (II) intel(0): 800x600@72Hz [ 125.928] (II) intel(0): 800x600@75Hz [ 125.928] (II) intel(0): 832x624@75Hz [ 125.928] (II) intel(0): 1024x768@60Hz [ 125.928] (II) intel(0): 1024x768@70Hz [ 125.928] (II) intel(0): 1024x768@75Hz [ 125.928] (II) intel(0): 1280x1024@75Hz [ 125.928] (II) intel(0): Manufacturer's mask: 0 [ 125.928] (II) intel(0): Supported detailed timing: [ 125.928] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 125.928] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 125.928] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 125.928] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz [ 125.928] (II) intel(0): Serial No: 6210BB7C4018 [ 125.928] (II) intel(0): Monitor name: AL1716A [ 125.928] (II) intel(0): EDID (in hex): [ 125.928] (II) intel(0): 00ffffffffffff00047246ad00000000 [ 125.928] (II) intel(0): 1510010308221b78e8dc55a359489e24 [ 125.928] (II) intel(0): 115054bfef0001010101010101010101 [ 125.928] (II) intel(0): 010101010101302a009851002a403070 [ 125.928] (II) intel(0): 1300520e1100001e000000fd00384b1e [ 125.928] (II) intel(0): 530e000a202020202020000000ff0036 [ 125.928] (II) intel(0): 32313042423743343031380a000000fc [ 125.928] (II) intel(0): 00414c31373136410a2020202020008d [ 125.928] (II) intel(0): Printing probed modes for output VGA1 [ 125.928] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 125.928] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 125.928] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 125.928] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 125.929] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 125.929] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 125.929] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 125.945] (II) intel(0): EDID for output DVI1 [ 125.945] (II) intel(0): EDID for output TV1 [ 125.945] (II) intel(0): Printing probed modes for output TV1 [ 125.945] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849 912 944 480 481 512 513 (15.4 kHz) [ 125.945] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641 704 736 480 481 512 513 (15.4 kHz) [ 125.945] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024 1025 1088 1120 768 769 800 801 (24.0 kHz) [ 125.945] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801 864 896 600 601 632 633 (19.0 kHz) [ 125.945] (II) intel(0): Output LVDS1 connected [ 125.945] (II) intel(0): Output VGA1 connected [ 125.945] (II) intel(0): Output DVI1 disconnected [ 125.945] (II) intel(0): Output TV1 disconnected [ 125.945] (II) intel(0): Using fuzzy aspect match for initial modes [ 125.945] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 125.945] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 125.945] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 125.945] (II) intel(0): Kernel page flipping support detected, enabling [ 125.945] (**) intel(0): Display dimensions: (300, 190) mm [ 125.945] (**) intel(0): DPI set to (86, 102) [ 125.945] (II) Loading sub module "fb" [ 125.945] (II) LoadModule: "fb" [ 125.945] (II) Loading /usr/lib/xorg/modules/libfb.so [ 125.993] (II) Module fb: vendor="X.Org Foundation" [ 125.993] compiled for 1.11.2.901, module version = 1.0.0 [ 125.993] ABI class: X.Org ANSI C Emulation, version 0.4 [ 125.993] (II) Loading sub module "dri2" [ 125.994] (II) LoadModule: "dri2" [ 125.994] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 125.994] (II) Module dri2: vendor="X.Org Foundation" [ 125.994] compiled for 1.11.2.901, module version = 1.2.0 [ 125.994] ABI class: X.Org Server Extension, version 6.0 [ 125.994] (==) Depth 24 pixmap format is 32 bpp [ 125.994] (II) intel(0): [DRI2] Setup complete [ 125.994] (II) intel(0): [DRI2] DRI driver: i915 [ 125.994] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 126.247] (II) UXA(0): Driver registered support for the following operations: [ 126.247] (II) solid [ 126.247] (II) copy [ 126.247] (II) composite (RENDER acceleration) [ 126.247] (II) put_image [ 126.247] (II) get_image [ 126.247] (==) intel(0): Backing store disabled [ 126.247] (==) intel(0): Silken mouse enabled [ 126.270] (II) intel(0): Initializing HW Cursor [ 127.075] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 127.077] (==) intel(0): DPMS enabled [ 127.077] (==) intel(0): Intel XvMC decoder disabled [ 127.077] (II) intel(0): Set up textured video [ 127.077] (II) intel(0): Set up overlay video [ 127.077] (II) intel(0): direct rendering: DRI2 Enabled [ 127.077] (==) intel(0): hotplug detection: "enabled" [ 127.078] (--) RandR disabled [ 127.078] (II) Initializing built-in extension Generic Event Extension [ 127.078] (II) Initializing built-in extension SHAPE [ 127.078] (II) Initializing built-in extension MIT-SHM [ 127.078] (II) Initializing built-in extension XInputExtension [ 127.078] (II) Initializing built-in extension XTEST [ 127.078] (II) Initializing built-in extension BIG-REQUESTS [ 127.078] (II) Initializing built-in extension SYNC [ 127.078] (II) Initializing built-in extension XKEYBOARD [ 127.078] (II) Initializing built-in extension XC-MISC [ 127.078] (II) Initializing built-in extension SECURITY [ 127.078] (II) Initializing built-in extension XINERAMA [ 127.078] (II) Initializing built-in extension XFIXES [ 127.078] (II) Initializing built-in extension RENDER [ 127.078] (II) Initializing built-in extension RANDR [ 127.078] (II) Initializing built-in extension COMPOSITE [ 127.078] (II) Initializing built-in extension DAMAGE [ 127.078] (II) SELinux: Disabled on system [ 127.797] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 127.797] (II) AIGLX: enabled GLX_INTEL_swap_event [ 127.797] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 127.797] (II) AIGLX: enabled GLX_SGI_make_current_read [ 127.797] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 127.797] (II) AIGLX: Loaded and initialized i915 [ 127.797] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 127.798] (II) intel(0): Setting screen physical size to 270 x 203 [ 130.488] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 130.488] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 130.488] (II) LoadModule: "evdev" [ 130.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.572] (II) Module evdev: vendor="X.Org Foundation" [ 130.572] compiled for 1.11.0, module version = 2.6.0 [ 130.572] Module class: X.Org XInput Driver [ 130.572] ABI class: X.Org XInput driver, version 13.0 [ 130.572] (II) Using input driver 'evdev' for 'Power Button' [ 130.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.572] (**) Power Button: always reports core events [ 130.572] (**) Power Button: Device: "/dev/input/event5" [ 130.572] (--) Power Button: Found keys [ 130.572] (II) Power Button: Configuring as keyboard [ 130.572] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 130.572] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 130.572] (**) Option "xkb_rules" "evdev" [ 130.572] (**) Option "xkb_model" "pc105" [ 130.572] (**) Option "xkb_layout" "us,ru" [ 130.572] (**) Option "xkb_variant" "," [ 130.572] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.739] (II) config/udev: Adding input device Video Bus (/dev/input/event1) [ 130.739] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 130.739] (II) Using input driver 'evdev' for 'Video Bus' [ 130.739] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.739] (**) Video Bus: always reports core events [ 130.739] (**) Video Bus: Device: "/dev/input/event1" [ 130.739] (--) Video Bus: Found keys [ 130.739] (II) Video Bus: Configuring as keyboard [ 130.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1" [ 130.739] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 130.739] (**) Option "xkb_rules" "evdev" [ 130.739] (**) Option "xkb_model" "pc105" [ 130.739] (**) Option "xkb_layout" "us,ru" [ 130.739] (**) Option "xkb_variant" "," [ 130.739] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.740] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 130.740] (II) No input driver/identifier specified (ignoring) [ 130.740] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 130.740] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 130.740] (II) Using input driver 'evdev' for 'Sleep Button' [ 130.740] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.740] (**) Sleep Button: always reports core events [ 130.740] (**) Sleep Button: Device: "/dev/input/event3" [ 130.740] (--) Sleep Button: Found keys [ 130.740] (II) Sleep Button: Configuring as keyboard [ 130.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 130.740] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 130.740] (**) Option "xkb_rules" "evdev" [ 130.740] (**) Option "xkb_model" "pc105" [ 130.740] (**) Option "xkb_layout" "us,ru" [ 130.740] (**) Option "xkb_variant" "," [ 130.740] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.741] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 130.741] (II) No input driver/identifier specified (ignoring) [ 130.741] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 130.741] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 130.741] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 130.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.741] (**) AT Translated Set 2 keyboard: always reports core events [ 130.741] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 130.741] (--) AT Translated Set 2 keyboard: Found keys [ 130.741] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 130.741] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 130.742] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 130.742] (**) Option "xkb_rules" "evdev" [ 130.742] (**) Option "xkb_model" "pc105" [ 130.742] (**) Option "xkb_layout" "us,ru" [ 130.742] (**) Option "xkb_variant" "," [ 130.742] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.742] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 130.742] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 130.742] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 130.742] (II) LoadModule: "synaptics" [ 130.742] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 130.879] (II) Module synaptics: vendor="X.Org Foundation" [ 130.879] compiled for 1.11.1.902, module version = 1.5.0 [ 130.879] Module class: X.Org XInput Driver [ 130.879] ABI class: X.Org XInput driver, version 13.0 [ 130.879] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 130.879] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 130.879] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 130.879] (**) Option "Device" "/dev/input/event7" [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 130.884] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 130.884] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 130.900] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7" [ 130.900] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10) [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 130.900] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 130.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 130.900] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 130.900] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 130.900] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 130.901] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10) [ 130.901] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 130.901] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 130.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.901] (**) PS/2 Generic Mouse: always reports core events [ 130.901] (**) PS/2 Generic Mouse: Device: "/dev/input/event10" [ 130.901] (--) PS/2 Generic Mouse: Found 3 mouse buttons [ 130.901] (--) PS/2 Generic Mouse: Found relative axes [ 130.901] (--) PS/2 Generic Mouse: Found x and y relative axes [ 130.901] (II) PS/2 Generic Mouse: Configuring as mouse [ 130.901] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 130.901] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 130.901] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input10/event10" [ 130.901] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11) [ 130.901] (II) PS/2 Generic Mouse: initialized for relative axes. [ 130.901] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 130.901] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 130.902] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.902] (II) config/udev: Adding input device PC Speaker (/dev/input/event2) [ 130.902] (II) No input driver/identifier specified (ignoring) [ 130.903] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event11) [ 130.903] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 130.903] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 130.903] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.903] (**) ACPI Virtual Keyboard Device: always reports core events [ 130.903] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event11" [ 130.903] (--) ACPI Virtual Keyboard Device: Found keys [ 130.903] (II) ACPI Virtual Keyboard Device: Configuring as keyboard [ 130.903] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11" [ 130.903] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12) [ 130.903] (**) Option "xkb_rules" "evdev" [ 130.903] (**) Option "xkb_model" "pc105" [ 130.903] (**) Option "xkb_layout" "us,ru" [ 130.903] (**) Option "xkb_variant" "," [ 130.903] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 130.904] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6) [ 130.904] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 130.904] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 130.904] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 130.904] (**) HP WMI hotkeys: always reports core events [ 130.904] (**) HP WMI hotkeys: Device: "/dev/input/event6" [ 130.904] (--) HP WMI hotkeys: Found keys [ 130.904] (II) HP WMI hotkeys: Configuring as keyboard [ 130.904] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6" [ 130.904] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13) [ 130.904] (**) Option "xkb_rules" "evdev" [ 130.904] (**) Option "xkb_model" "pc105" [ 130.904] (**) Option "xkb_layout" "us,ru" [ 130.904] (**) Option "xkb_variant" "," [ 130.904] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 340.311] (II) intel(0): EDID vendor "QDS", prod id 83 [ 340.311] (II) intel(0): Printing DDC gathered Modelines: [ 340.311] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 340.394] (WW) intel(0): Failed to set tiling on frontbuffer. [ 340.394] (II) intel(0): Allocated new frame buffer 2560x800 stride 10240, untiled [ 341.120] (II) intel(0): EDID vendor "QDS", prod id 83 [ 341.120] (II) intel(0): Printing DDC gathered Modelines: [ 341.120] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 341.198] (WW) intel(0): Failed to set tiling on frontbuffer. [ 341.198] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [ 341.340] (II) intel(0): EDID vendor "QDS", prod id 83 [ 341.340] (II) intel(0): Printing DDC gathered Modelines: [ 341.340] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 365.736] (II) intel(0): EDID vendor "QDS", prod id 83 [ 365.741] (II) intel(0): Printing DDC gathered Modelines: [ 365.741] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 400.260] (II) intel(0): EDID vendor "QDS", prod id 83 [ 400.260] (II) intel(0): Printing DDC gathered Modelines: [ 400.260] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 421.760] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2) [ 421.760] (II) No input driver/identifier specified (ignoring) [ 421.761] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12) [ 421.761] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall" [ 421.761] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse' [ 421.761] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 421.761] (**) Bluetooth Laser Travel Mouse: always reports core events [ 421.761] (**) Bluetooth Laser Travel Mouse: Device: "/dev/input/event12" [ 421.761] (--) Bluetooth Laser Travel Mouse: Found 12 mouse buttons [ 421.761] (--) Bluetooth Laser Travel Mouse: Found scroll wheel(s) [ 421.761] (--) Bluetooth Laser Travel Mouse: Found relative axes [ 421.761] (--) Bluetooth Laser Travel Mouse: Found x and y relative axes [ 421.761] (II) Bluetooth Laser Travel Mouse: Configuring as mouse [ 421.761] (II) Bluetooth Laser Travel Mouse: Adding scrollwheel support [ 421.761] (**) Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5 [ 421.761] (**) Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 421.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12" [ 421.761] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 14) [ 421.761] (II) Bluetooth Laser Travel Mouse: initialized for relative axes. [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1 [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0 [ 421.761] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000 [ 421.762] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4 [ 6946.842] (II) intel(0): EDID vendor "QDS", prod id 83 [ 6946.842] (II) intel(0): Printing DDC gathered Modelines: [ 6946.842] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 6950.043] (II) intel(0): EDID vendor "QDS", prod id 83 [ 6950.043] (II) intel(0): Printing DDC gathered Modelines: [ 6950.043] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 11008.559] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11010.747] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.571] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11012.572] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11016.581] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.922] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.923] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.927] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.927] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11052.928] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.112] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.418] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.430] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11054.565] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11056.869] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.605] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.628] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.632] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.637] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.647] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.648] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11059.653] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.222] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.279] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.288] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.301] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11060.310] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11062.774] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11062.786] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11064.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.521] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.699] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.700] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.700] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11068.853] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.280] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.320] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.469] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.617] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.886] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.900] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11069.921] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.215] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.293] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.621] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.622] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11070.623] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11071.081] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.052] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.079] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.652] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11072.679] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.253] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.281] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.853] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.881] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11073.940] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.813] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11074.817] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.646] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11075.649] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11102.038] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11222.762] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11343.488] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11362.614] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11364.112] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11448.790] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11464.227] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11644.975] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11825.519] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.338] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.338] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.338] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.338] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.374] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.374] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.375] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.375] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.375] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11843.375] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11845.115] (II) intel(0): EDID vendor "QDS", prod id 83 [ 11845.115] (II) intel(0): Printing DDC gathered Modelines: [ 11845.115] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 11962.595] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11964.093] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory [ 11976.190] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Cannot allocate memory --===============0508400312==-- -- Package-specific info: X server symlink status: ------------------------ lrwxrwxrwx 1 root root 13 Sep 2 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2048200 Nov 29 21:08 /usr/bin/Xorg VGA-compatible devices on PCI bus: ---------------------------------- 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) /etc/X11/xorg.conf does not exist. /etc/X11/xorg.conf.d does not exist. KMS configuration files: ------------------------ /etc/modprobe.d/i915-kms.conf: options i915 modeset=1 Kernel version (/proc/version): ------------------------------- Linux version 3.1.0-1-686-pae (Debian 3.1.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Tue Nov 29 19:01:56 UTC 2011 Xorg X server log files on system: ---------------------------------- -rw-r--r-- 1 root root 36972 Dec 10 20:42 /var/log/Xorg.0.log Contents of most recent Xorg X server log file (/var/log/Xorg.0.log): --------------------------------------------------------------------- [ 12484.417] X.Org X Server 1.11.2.901 (1.11.3 RC 1) Release Date: 2011-11-28 [ 12484.417] X Protocol Version 11, Revision 0 [ 12484.417] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian [ 12484.417] Current Operating System: Linux serenity 3.1.0-1-686-pae #1 SMP Tue Nov 29 19:01:56 UTC 2011 i686 [ 12484.417] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=a6d0c0df-fe6c-4d2d-b003-70b7d25b6aa3 ro quiet [ 12484.417] Build Date: 29 November 2011 05:01:50PM [ 12484.417] xorg-server 2:1.11.2.901-1 (Cyril Brulebois <kibi@debian.org>) [ 12484.417] Current version of pixman: 0.24.0 [ 12484.417] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12484.417] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12484.418] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 10 20:41:51 2011 [ 12484.418] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12484.418] (==) No Layout section. Using the first Screen section. [ 12484.418] (==) No screen section available. Using defaults. [ 12484.418] (**) |-->Screen "Default Screen Section" (0) [ 12484.418] (**) | |-->Monitor "<default monitor>" [ 12484.418] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 12484.418] (==) Automatically adding devices [ 12484.418] (==) Automatically enabling devices [ 12484.419] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 12484.419] (==) ModulePath set to "/usr/lib/xorg/modules" [ 12484.419] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12484.419] (II) Loader magic: 0xb779e580 [ 12484.419] (II) Module ABI versions: [ 12484.419] X.Org ANSI C Emulation: 0.4 [ 12484.419] X.Org Video Driver: 11.0 [ 12484.419] X.Org XInput driver : 13.0 [ 12484.419] X.Org Server Extension : 6.0 [ 12484.420] (--) PCI:*(0:0:2:0) 8086:27a2:103c:30ad rev 3, Mem @ 0xf4600000/524288, 0xe0000000/268435456, 0xf4680000/262144, I/O @ 0x00004000/8 [ 12484.420] (--) PCI: (0:0:2:1) 8086:27a6:103c:30ad rev 3, Mem @ 0xf4700000/524288 [ 12484.420] (II) Open ACPI successful (/var/run/acpid.socket) [ 12484.420] (II) LoadModule: "extmod" [ 12484.421] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 12484.421] (II) Module extmod: vendor="X.Org Foundation" [ 12484.421] compiled for 1.11.2.901, module version = 1.0.0 [ 12484.421] Module class: X.Org Server Extension [ 12484.421] ABI class: X.Org Server Extension, version 6.0 [ 12484.421] (II) Loading extension SELinux [ 12484.421] (II) Loading extension MIT-SCREEN-SAVER [ 12484.421] (II) Loading extension XFree86-VidModeExtension [ 12484.421] (II) Loading extension XFree86-DGA [ 12484.421] (II) Loading extension DPMS [ 12484.421] (II) Loading extension XVideo [ 12484.421] (II) Loading extension XVideo-MotionCompensation [ 12484.421] (II) Loading extension X-Resource [ 12484.421] (II) LoadModule: "dbe" [ 12484.421] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 12484.421] (II) Module dbe: vendor="X.Org Foundation" [ 12484.422] compiled for 1.11.2.901, module version = 1.0.0 [ 12484.422] Module class: X.Org Server Extension [ 12484.422] ABI class: X.Org Server Extension, version 6.0 [ 12484.422] (II) Loading extension DOUBLE-BUFFER [ 12484.422] (II) LoadModule: "glx" [ 12484.422] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12484.422] (II) Module glx: vendor="X.Org Foundation" [ 12484.422] compiled for 1.11.2.901, module version = 1.0.0 [ 12484.422] ABI class: X.Org Server Extension, version 6.0 [ 12484.422] (==) AIGLX enabled [ 12484.422] (II) Loading extension GLX [ 12484.422] (II) LoadModule: "record" [ 12484.422] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 12484.422] (II) Module record: vendor="X.Org Foundation" [ 12484.422] compiled for 1.11.2.901, module version = 1.13.0 [ 12484.422] Module class: X.Org Server Extension [ 12484.422] ABI class: X.Org Server Extension, version 6.0 [ 12484.422] (II) Loading extension RECORD [ 12484.422] (II) LoadModule: "dri" [ 12484.423] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 12484.423] (II) Module dri: vendor="X.Org Foundation" [ 12484.423] compiled for 1.11.2.901, module version = 1.0.0 [ 12484.423] ABI class: X.Org Server Extension, version 6.0 [ 12484.423] (II) Loading extension XFree86-DRI [ 12484.423] (II) LoadModule: "dri2" [ 12484.423] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 12484.423] (II) Module dri2: vendor="X.Org Foundation" [ 12484.423] compiled for 1.11.2.901, module version = 1.2.0 [ 12484.423] ABI class: X.Org Server Extension, version 6.0 [ 12484.423] (II) Loading extension DRI2 [ 12484.423] (==) Matched intel as autoconfigured driver 0 [ 12484.423] (==) Matched vesa as autoconfigured driver 1 [ 12484.423] (==) Matched fbdev as autoconfigured driver 2 [ 12484.423] (==) Assigned the driver to the xf86ConfigLayout [ 12484.423] (II) LoadModule: "intel" [ 12484.423] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 12484.424] (II) Module intel: vendor="X.Org Foundation" [ 12484.424] compiled for 1.11.1.902, module version = 2.17.0 [ 12484.424] Module class: X.Org Video Driver [ 12484.424] ABI class: X.Org Video Driver, version 11.0 [ 12484.424] (II) LoadModule: "vesa" [ 12484.424] (WW) Warning, couldn't open module vesa [ 12484.424] (II) UnloadModule: "vesa" [ 12484.424] (II) Unloading vesa [ 12484.424] (EE) Failed to load module "vesa" (module does not exist, 0) [ 12484.424] (II) LoadModule: "fbdev" [ 12484.425] (WW) Warning, couldn't open module fbdev [ 12484.425] (II) UnloadModule: "fbdev" [ 12484.425] (II) Unloading fbdev [ 12484.425] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 12484.425] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 12484.425] (++) using VT number 7 [ 12484.433] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 12484.433] drmOpenDevice: node name is /dev/dri/card0 [ 12484.433] drmOpenDevice: open result is 9, (OK) [ 12484.433] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 12484.433] drmOpenDevice: node name is /dev/dri/card0 [ 12484.433] drmOpenDevice: open result is 9, (OK) [ 12484.433] drmOpenByBusid: drmOpenMinor returns 9 [ 12484.433] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 12484.433] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12484.433] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 12484.433] (==) intel(0): RGB weight 888 [ 12484.433] (==) intel(0): Default visual is TrueColor [ 12484.433] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM [ 12484.433] (--) intel(0): Chipset: "945GM" [ 12484.433] (**) intel(0): Relaxed fencing disabled [ 12484.433] (**) intel(0): Wait on SwapBuffers? enabled [ 12484.433] (**) intel(0): Triple buffering? enabled [ 12484.433] (**) intel(0): Framebuffer tiled [ 12484.433] (**) intel(0): Pixmaps tiled [ 12484.434] (**) intel(0): 3D buffers tiled [ 12484.434] (**) intel(0): SwapBuffers wait enabled [ 12484.434] (==) intel(0): video overlay key set to 0x101fe [ 12484.434] (II) intel(0): Output LVDS1 has no monitor section [ 12484.434] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 12484.492] (II) intel(0): Output VGA1 has no monitor section [ 12484.508] (II) intel(0): Output DVI1 has no monitor section [ 12484.509] (II) intel(0): Output TV1 has no monitor section [ 12484.509] (II) intel(0): EDID for output LVDS1 [ 12484.509] (II) intel(0): Manufacturer: QDS Model: 53 Serial#: 0 [ 12484.509] (II) intel(0): Year: 2005 Week: 0 [ 12484.509] (II) intel(0): EDID Version: 1.3 [ 12484.509] (II) intel(0): Digital Display Input [ 12484.509] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 12484.509] (II) intel(0): Gamma: 2.20 [ 12484.509] (II) intel(0): No DPMS capabilities specified [ 12484.509] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 12484.509] (II) intel(0): First detailed timing is preferred mode [ 12484.509] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.314 greenY: 0.550 [ 12484.509] (II) intel(0): blueX: 0.154 blueY: 0.135 whiteX: 0.312 whiteY: 0.328 [ 12484.509] (II) intel(0): Manufacturer's mask: 0 [ 12484.509] (II) intel(0): Supported detailed timing: [ 12484.509] (II) intel(0): clock: 68.9 MHz Image Size: 304 x 190 mm [ 12484.509] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0 [ 12484.509] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0 [ 12484.509] (II) intel(0): Unknown vendor-specific block f [ 12484.509] (II) intel(0): QUANTADISPLAY [ 12484.509] (II) intel(0): QD14TL025 [ 12484.509] (II) intel(0): EDID (in hex): [ 12484.509] (II) intel(0): 00ffffffffffff004493530000000000 [ 12484.509] (II) intel(0): 000f0103801e13780a3ba09355508c27 [ 12484.509] (II) intel(0): 22505400000001010101010101010101 [ 12484.509] (II) intel(0): 010101010101ea1a0080502010301520 [ 12484.509] (II) intel(0): 440030be100000180000000f0008002a [ 12484.509] (II) intel(0): 0001000400324a041901000000fe0051 [ 12484.509] (II) intel(0): 55414e5441444953504c4159000000fe [ 12484.509] (II) intel(0): 0051443134544c3032350a20202000e0 [ 12484.509] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12484.509] (II) intel(0): Printing DDC gathered Modelines: [ 12484.509] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12484.509] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 12484.509] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 12484.510] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 12484.510] (II) intel(0): Printing probed modes for output LVDS1 [ 12484.510] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12484.510] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 12484.510] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 12484.510] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 12484.510] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 12484.568] (II) intel(0): EDID for output VGA1 [ 12484.568] (II) intel(0): Manufacturer: ACR Model: ad46 Serial#: 0 [ 12484.568] (II) intel(0): Year: 2006 Week: 21 [ 12484.568] (II) intel(0): EDID Version: 1.3 [ 12484.568] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 12484.568] (II) intel(0): Sync: Separate [ 12484.568] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 12484.568] (II) intel(0): Gamma: 2.20 [ 12484.568] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 12484.568] (II) intel(0): First detailed timing not preferred mode in violation of standard! [ 12484.568] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617 [ 12484.568] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 [ 12484.568] (II) intel(0): Supported established timings: [ 12484.568] (II) intel(0): 720x400@70Hz [ 12484.568] (II) intel(0): 640x480@60Hz [ 12484.568] (II) intel(0): 640x480@67Hz [ 12484.568] (II) intel(0): 640x480@72Hz [ 12484.568] (II) intel(0): 640x480@75Hz [ 12484.568] (II) intel(0): 800x600@56Hz [ 12484.568] (II) intel(0): 800x600@60Hz [ 12484.568] (II) intel(0): 800x600@72Hz [ 12484.568] (II) intel(0): 800x600@75Hz [ 12484.568] (II) intel(0): 832x624@75Hz [ 12484.568] (II) intel(0): 1024x768@60Hz [ 12484.568] (II) intel(0): 1024x768@70Hz [ 12484.568] (II) intel(0): 1024x768@75Hz [ 12484.568] (II) intel(0): 1280x1024@75Hz [ 12484.568] (II) intel(0): Manufacturer's mask: 0 [ 12484.568] (II) intel(0): Supported detailed timing: [ 12484.568] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 12484.568] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 12484.568] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 12484.568] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz [ 12484.568] (II) intel(0): Serial No: 6210BB7C4018 [ 12484.568] (II) intel(0): Monitor name: AL1716A [ 12484.568] (II) intel(0): EDID (in hex): [ 12484.568] (II) intel(0): 00ffffffffffff00047246ad00000000 [ 12484.568] (II) intel(0): 1510010308221b78e8dc55a359489e24 [ 12484.568] (II) intel(0): 115054bfef0001010101010101010101 [ 12484.568] (II) intel(0): 010101010101302a009851002a403070 [ 12484.568] (II) intel(0): 1300520e1100001e000000fd00384b1e [ 12484.568] (II) intel(0): 530e000a202020202020000000ff0036 [ 12484.568] (II) intel(0): 32313042423743343031380a000000fc [ 12484.568] (II) intel(0): 00414c31373136410a2020202020008d [ 12484.568] (II) intel(0): Printing probed modes for output VGA1 [ 12484.568] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 12484.568] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 12484.568] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 12484.568] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 12484.569] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 12484.569] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) [ 12484.569] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) [ 12484.569] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 12484.569] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 12484.569] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 12484.569] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [ 12484.569] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 12484.569] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) [ 12484.569] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 12484.569] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 12484.585] (II) intel(0): EDID for output DVI1 [ 12484.585] (II) intel(0): EDID for output TV1 [ 12484.585] (II) intel(0): Printing probed modes for output TV1 [ 12484.585] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849 912 944 480 481 512 513 (15.4 kHz) [ 12484.585] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641 704 736 480 481 512 513 (15.4 kHz) [ 12484.585] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024 1025 1088 1120 768 769 800 801 (24.0 kHz) [ 12484.585] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801 864 896 600 601 632 633 (19.0 kHz) [ 12484.585] (II) intel(0): Output LVDS1 connected [ 12484.585] (II) intel(0): Output VGA1 connected [ 12484.585] (II) intel(0): Output DVI1 disconnected [ 12484.585] (II) intel(0): Output TV1 disconnected [ 12484.585] (II) intel(0): Using fuzzy aspect match for initial modes [ 12484.585] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 12484.585] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 12484.585] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 12484.585] (II) intel(0): Kernel page flipping support detected, enabling [ 12484.585] (**) intel(0): Display dimensions: (300, 190) mm [ 12484.585] (**) intel(0): DPI set to (86, 102) [ 12484.585] (II) Loading sub module "fb" [ 12484.585] (II) LoadModule: "fb" [ 12484.585] (II) Loading /usr/lib/xorg/modules/libfb.so [ 12484.586] (II) Module fb: vendor="X.Org Foundation" [ 12484.586] compiled for 1.11.2.901, module version = 1.0.0 [ 12484.586] ABI class: X.Org ANSI C Emulation, version 0.4 [ 12484.586] (II) Loading sub module "dri2" [ 12484.586] (II) LoadModule: "dri2" [ 12484.586] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 12484.586] (II) Module dri2: vendor="X.Org Foundation" [ 12484.586] compiled for 1.11.2.901, module version = 1.2.0 [ 12484.586] ABI class: X.Org Server Extension, version 6.0 [ 12484.586] (==) Depth 24 pixmap format is 32 bpp [ 12484.586] (II) intel(0): [DRI2] Setup complete [ 12484.586] (II) intel(0): [DRI2] DRI driver: i915 [ 12484.586] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 12484.586] (II) UXA(0): Driver registered support for the following operations: [ 12484.586] (II) solid [ 12484.586] (II) copy [ 12484.586] (II) composite (RENDER acceleration) [ 12484.586] (II) put_image [ 12484.586] (II) get_image [ 12484.586] (==) intel(0): Backing store disabled [ 12484.586] (==) intel(0): Silken mouse enabled [ 12484.586] (II) intel(0): Initializing HW Cursor [ 12485.347] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 12485.350] (==) intel(0): DPMS enabled [ 12485.350] (==) intel(0): Intel XvMC decoder disabled [ 12485.351] (II) intel(0): Set up textured video [ 12485.351] (II) intel(0): Set up overlay video [ 12485.351] (II) intel(0): direct rendering: DRI2 Enabled [ 12485.351] (==) intel(0): hotplug detection: "enabled" [ 12485.351] (--) RandR disabled [ 12485.351] (II) Initializing built-in extension Generic Event Extension [ 12485.351] (II) Initializing built-in extension SHAPE [ 12485.351] (II) Initializing built-in extension MIT-SHM [ 12485.351] (II) Initializing built-in extension XInputExtension [ 12485.351] (II) Initializing built-in extension XTEST [ 12485.351] (II) Initializing built-in extension BIG-REQUESTS [ 12485.351] (II) Initializing built-in extension SYNC [ 12485.351] (II) Initializing built-in extension XKEYBOARD [ 12485.351] (II) Initializing built-in extension XC-MISC [ 12485.351] (II) Initializing built-in extension SECURITY [ 12485.351] (II) Initializing built-in extension XINERAMA [ 12485.351] (II) Initializing built-in extension XFIXES [ 12485.351] (II) Initializing built-in extension RENDER [ 12485.351] (II) Initializing built-in extension RANDR [ 12485.351] (II) Initializing built-in extension COMPOSITE [ 12485.351] (II) Initializing built-in extension DAMAGE [ 12485.351] (II) SELinux: Disabled on system [ 12485.367] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 12485.367] (II) AIGLX: enabled GLX_INTEL_swap_event [ 12485.367] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 12485.367] (II) AIGLX: enabled GLX_SGI_make_current_read [ 12485.367] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 12485.367] (II) AIGLX: Loaded and initialized i915 [ 12485.367] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 12485.368] (II) intel(0): Setting screen physical size to 270 x 203 [ 12485.455] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 12485.456] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 12485.456] (II) LoadModule: "evdev" [ 12485.456] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.456] (II) Module evdev: vendor="X.Org Foundation" [ 12485.456] compiled for 1.11.0, module version = 2.6.0 [ 12485.456] Module class: X.Org XInput Driver [ 12485.456] ABI class: X.Org XInput driver, version 13.0 [ 12485.456] (II) Using input driver 'evdev' for 'Power Button' [ 12485.456] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.456] (**) Power Button: always reports core events [ 12485.456] (**) Power Button: Device: "/dev/input/event5" [ 12485.456] (--) Power Button: Found keys [ 12485.456] (II) Power Button: Configuring as keyboard [ 12485.456] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 12485.456] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 12485.456] (**) Option "xkb_rules" "evdev" [ 12485.456] (**) Option "xkb_model" "pc105" [ 12485.456] (**) Option "xkb_layout" "us,ru" [ 12485.456] (**) Option "xkb_variant" "," [ 12485.456] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12485.488] (II) config/udev: Adding input device Video Bus (/dev/input/event1) [ 12485.488] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 12485.488] (II) Using input driver 'evdev' for 'Video Bus' [ 12485.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.488] (**) Video Bus: always reports core events [ 12485.488] (**) Video Bus: Device: "/dev/input/event1" [ 12485.488] (--) Video Bus: Found keys [ 12485.488] (II) Video Bus: Configuring as keyboard [ 12485.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1" [ 12485.488] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 12485.488] (**) Option "xkb_rules" "evdev" [ 12485.488] (**) Option "xkb_model" "pc105" [ 12485.488] (**) Option "xkb_layout" "us,ru" [ 12485.488] (**) Option "xkb_variant" "," [ 12485.488] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12485.488] (II) config/udev: Adding input device Lid Switch (/dev/input/event4) [ 12485.488] (II) No input driver/identifier specified (ignoring) [ 12485.489] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 12485.489] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 12485.489] (II) Using input driver 'evdev' for 'Sleep Button' [ 12485.489] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.489] (**) Sleep Button: always reports core events [ 12485.489] (**) Sleep Button: Device: "/dev/input/event3" [ 12485.489] (--) Sleep Button: Found keys [ 12485.489] (II) Sleep Button: Configuring as keyboard [ 12485.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3" [ 12485.489] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 12485.489] (**) Option "xkb_rules" "evdev" [ 12485.489] (**) Option "xkb_model" "pc105" [ 12485.489] (**) Option "xkb_layout" "us,ru" [ 12485.489] (**) Option "xkb_variant" "," [ 12485.489] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12485.490] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9) [ 12485.490] (II) No input driver/identifier specified (ignoring) [ 12485.490] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/event12) [ 12485.490] (**) Bluetooth Laser Travel Mouse: Applying InputClass "evdev pointer catchall" [ 12485.490] (II) Using input driver 'evdev' for 'Bluetooth Laser Travel Mouse' [ 12485.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.490] (**) Bluetooth Laser Travel Mouse: always reports core events [ 12485.490] (**) Bluetooth Laser Travel Mouse: Device: "/dev/input/event12" [ 12485.490] (--) Bluetooth Laser Travel Mouse: Found 12 mouse buttons [ 12485.490] (--) Bluetooth Laser Travel Mouse: Found scroll wheel(s) [ 12485.490] (--) Bluetooth Laser Travel Mouse: Found relative axes [ 12485.490] (--) Bluetooth Laser Travel Mouse: Found x and y relative axes [ 12485.490] (II) Bluetooth Laser Travel Mouse: Configuring as mouse [ 12485.490] (II) Bluetooth Laser Travel Mouse: Adding scrollwheel support [ 12485.490] (**) Bluetooth Laser Travel Mouse: YAxisMapping: buttons 4 and 5 [ 12485.490] (**) Bluetooth Laser Travel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 12485.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12" [ 12485.490] (II) XINPUT: Adding extended input device "Bluetooth Laser Travel Mouse" (type: MOUSE, id 9) [ 12485.491] (II) Bluetooth Laser Travel Mouse: initialized for relative axes. [ 12485.491] (**) Bluetooth Laser Travel Mouse: (accel) keeping acceleration scheme 1 [ 12485.491] (**) Bluetooth Laser Travel Mouse: (accel) acceleration profile 0 [ 12485.491] (**) Bluetooth Laser Travel Mouse: (accel) acceleration factor: 2.000 [ 12485.491] (**) Bluetooth Laser Travel Mouse: (accel) acceleration threshold: 4 [ 12485.491] (II) config/udev: Adding input device Bluetooth Laser Travel Mouse (/dev/input/mouse2) [ 12485.491] (II) No input driver/identifier specified (ignoring) [ 12485.491] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 12485.491] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 12485.491] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 12485.491] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.491] (**) AT Translated Set 2 keyboard: always reports core events [ 12485.491] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 12485.492] (--) AT Translated Set 2 keyboard: Found keys [ 12485.492] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 12485.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 12485.492] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 12485.492] (**) Option "xkb_rules" "evdev" [ 12485.492] (**) Option "xkb_model" "pc105" [ 12485.492] (**) Option "xkb_layout" "us,ru" [ 12485.492] (**) Option "xkb_variant" "," [ 12485.492] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12485.492] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 12485.492] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 12485.492] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 12485.492] (II) LoadModule: "synaptics" [ 12485.492] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 12485.493] (II) Module synaptics: vendor="X.Org Foundation" [ 12485.493] compiled for 1.11.1.902, module version = 1.5.0 [ 12485.493] Module class: X.Org XInput Driver [ 12485.493] ABI class: X.Org XInput driver, version 13.0 [ 12485.493] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 12485.493] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 12485.493] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 12485.493] (**) Option "Device" "/dev/input/event7" [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 12485.524] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 12485.524] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 12485.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7" [ 12485.524] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11) [ 12485.524] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 12485.524] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 12485.524] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 12485.525] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 12485.525] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 12485.525] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 12485.525] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 12485.525] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 12485.525] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 12485.525] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 12485.526] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10) [ 12485.526] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall" [ 12485.526] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse' [ 12485.526] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.526] (**) PS/2 Generic Mouse: always reports core events [ 12485.526] (**) PS/2 Generic Mouse: Device: "/dev/input/event10" [ 12485.526] (--) PS/2 Generic Mouse: Found 3 mouse buttons [ 12485.526] (--) PS/2 Generic Mouse: Found relative axes [ 12485.526] (--) PS/2 Generic Mouse: Found x and y relative axes [ 12485.526] (II) PS/2 Generic Mouse: Configuring as mouse [ 12485.526] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 [ 12485.526] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 12485.527] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input10/event10" [ 12485.527] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 12) [ 12485.527] (II) PS/2 Generic Mouse: initialized for relative axes. [ 12485.527] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 [ 12485.527] (**) PS/2 Generic Mouse: (accel) acceleration profile 0 [ 12485.527] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000 [ 12485.527] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4 [ 12485.527] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1) [ 12485.527] (II) No input driver/identifier specified (ignoring) [ 12485.528] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8) [ 12485.528] (II) No input driver/identifier specified (ignoring) [ 12485.529] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0) [ 12485.529] (II) No input driver/identifier specified (ignoring) [ 12485.529] (II) config/udev: Adding input device PC Speaker (/dev/input/event2) [ 12485.529] (II) No input driver/identifier specified (ignoring) [ 12485.530] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event11) [ 12485.530] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 12485.530] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 12485.530] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.531] (**) ACPI Virtual Keyboard Device: always reports core events [ 12485.531] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event11" [ 12485.531] (--) ACPI Virtual Keyboard Device: Found keys [ 12485.531] (II) ACPI Virtual Keyboard Device: Configuring as keyboard [ 12485.531] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11" [ 12485.531] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13) [ 12485.531] (**) Option "xkb_rules" "evdev" [ 12485.531] (**) Option "xkb_model" "pc105" [ 12485.531] (**) Option "xkb_layout" "us,ru" [ 12485.531] (**) Option "xkb_variant" "," [ 12485.531] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12485.532] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6) [ 12485.532] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 12485.532] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 12485.532] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 12485.532] (**) HP WMI hotkeys: always reports core events [ 12485.532] (**) HP WMI hotkeys: Device: "/dev/input/event6" [ 12485.532] (--) HP WMI hotkeys: Found keys [ 12485.532] (II) HP WMI hotkeys: Configuring as keyboard [ 12485.532] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6" [ 12485.532] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14) [ 12485.532] (**) Option "xkb_rules" "evdev" [ 12485.532] (**) Option "xkb_model" "pc105" [ 12485.532] (**) Option "xkb_layout" "us,ru" [ 12485.532] (**) Option "xkb_variant" "," [ 12485.532] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 12489.134] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12489.134] (II) intel(0): Printing DDC gathered Modelines: [ 12489.134] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12489.218] (WW) intel(0): Failed to set tiling on frontbuffer. [ 12489.218] (II) intel(0): Allocated new frame buffer 2560x800 stride 10240, untiled [ 12489.964] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12489.964] (II) intel(0): Printing DDC gathered Modelines: [ 12489.964] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12490.049] (WW) intel(0): Failed to set tiling on frontbuffer. [ 12490.049] (II) intel(0): Allocated new frame buffer 2560x1024 stride 10240, untiled [ 12490.184] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12490.184] (II) intel(0): Printing DDC gathered Modelines: [ 12490.184] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12492.701] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12492.701] (II) intel(0): Printing DDC gathered Modelines: [ 12492.701] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) [ 12505.275] (II) intel(0): EDID vendor "QDS", prod id 83 [ 12505.275] (II) intel(0): Printing DDC gathered Modelines: [ 12505.275] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz) udev information: ----------------- P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: KEY=100000 0 0 0 E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power Button" E: PHYS="LNXPWRBN/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8839058 P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5 N: input/event5 E: BACKSPACE=guess E: DEVNAME=/dev/input/event5 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXPWRBN:00 E: ID_PATH_TAG=acpi-LNXPWRBN_00 E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280635 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b 0 0 0 0 0 0 0 E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8707663 P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1 N: input/event1 E: BACKSPACE=guess E: DEVNAME=/dev/input/event1 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input1/event1 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280030 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 E: EV=21 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E: SUBSYSTEM=input E: SW=1 E: UDEV_LOG=3 E: USEC_INITIALIZED=8838291 P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 N: input/event4 E: DEVNAME=/dev/input/event4 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4 E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E: MAJOR=13 E: MINOR=68 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8853481 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 0 0 E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8837475 P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 N: input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E: MINOR=67 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280355 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/pci0000:00/0000:00:1b.0/input/input9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MODALIAS=input:b0001v11D4p1981e0001-e0,12,kramls1,2,fw E: NAME="HDA Digital PCBeep" E: PHYS="card0/codec#0/beep0" E: PRODUCT=1/11d4/1981/1 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=11570785 P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9 N: input/event9 E: DEVNAME=/dev/input/event9 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9 E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: ID_PATH_TAG=pci-0000_00_1b_0 E: MAJOR=13 E: MINOR=73 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=11575957 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12 E: EV=17 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: KEY=ff0000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0005v046DpB008e0314-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,6,8,am4,lsfw E: MSC=10 E: NAME="Bluetooth Laser Travel Mouse" E: PHYS="00:1A:6B:23:1D:36" E: PRODUCT=5/46d/b008/314 E: PROP=0 E: REL=143 E: SUBSYSTEM=input E: UDEV_LOG=3 E: UNIQ="00:07:61:BA:14:38" E: USEC_INITIALIZED=421755306 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12 N: input/event12 E: DEVNAME=/dev/input/event12 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/event12 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: MAJOR=13 E: MINOR=76 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=421760988 P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/mouse2 N: input/mouse2 E: DEVNAME=/dev/input/mouse2 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/bluetooth/hci0/hci0:11/input12/mouse2 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: MAJOR=13 E: MINOR=34 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=421760032 P: /devices/platform/i8042/serio0/input/input0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: KEY=500f 2300002 3803078 f910d401 feffffdf ffefffff ffffffff fffffffe E: LED=7 E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,94,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D4,D5,D9,E0,E1,E2,E3,EC,EE,ram4,l0,1,2,sfw E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E: PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8506997 P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E: DEVNAME=/dev/input/event0 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=64 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9280411 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/platform/i8042/serio4/input/input7 E: ABS=11000003 E: DEVPATH=/devices/platform/i8042/serio4/input/input7 E: EV=b E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: KEY=6420 0 30000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw E: NAME="SynPS/2 Synaptics TouchPad" E: PHYS="isa0060/serio4/input0" E: PRODUCT=11/2/7/25b1 E: PROP=1 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9521112 P: /devices/platform/i8042/serio4/input/input7/event7 N: input/event7 S: input/by-path/platform-i8042-serio-4-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse E: DEVNAME=/dev/input/event7 E: DEVPATH=/devices/platform/i8042/serio4/input/input7/event7 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=71 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9583100 P: /devices/platform/i8042/serio4/input/input7/mouse0 N: input/mouse0 S: input/by-path/platform-i8042-serio-4-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse E: DEVNAME=/dev/input/mouse0 E: DEVPATH=/devices/platform/i8042/serio4/input/input7/mouse0 E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-4 E: ID_PATH_TAG=platform-i8042-serio-4 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=32 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9582511 P: /devices/platform/i8042/serio4/serio5/input/input10 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10 E: EV=7 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: KEY=70000 0 0 0 0 0 0 0 0 E: MODALIAS=input:b0011v0002p0001e0000-e0,1,2,k110,111,112,r0,1,amlsfw E: NAME="PS/2 Generic Mouse" E: PHYS="synaptics-pt/serio0/input0" E: PRODUCT=11/2/1/0 E: PROP=0 E: REL=3 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15082724 P: /devices/platform/i8042/serio4/serio5/input/input10/event10 N: input/event10 S: input/by-path/platform-i8042-serio-5-event-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-event-mouse E: DEVNAME=/dev/input/event10 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10/event10 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=74 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15085657 P: /devices/platform/i8042/serio4/serio5/input/input10/mouse1 N: input/mouse1 S: input/by-path/platform-i8042-serio-5-mouse E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-mouse E: DEVNAME=/dev/input/mouse1 E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input10/mouse1 E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-5 E: ID_PATH_TAG=platform-i8042-serio-5 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=33 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=15085867 P: /devices/platform/lis3lv02d/input/input8 E: ABS=7 E: DEVPATH=/devices/platform/lis3lv02d/input/input8 E: EV=9 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw E: NAME="ST LIS3LV02DL Accelerometer" E: PHYS="lis3lv02d/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9963758 P: /devices/platform/lis3lv02d/input/input8/event8 N: input/event8 S: input/by-path/platform-lis3lv02d-event E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event E: DEVNAME=/dev/input/event8 E: DEVPATH=/devices/platform/lis3lv02d/input/input8/event8 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9967847 P: /devices/platform/lis3lv02d/input/input8/js0 N: input/js0 E: DEVNAME=/dev/input/js0 E: DEVPATH=/devices/platform/lis3lv02d/input/input8/js0 E: ID_INPUT=1 E: ID_INPUT_ACCELEROMETER=1 E: ID_PATH=platform-lis3lv02d E: ID_PATH_TAG=platform-lis3lv02d E: MAJOR=13 E: MINOR=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9967802 P: /devices/platform/pcspkr/input/input2 E: DEVPATH=/devices/platform/pcspkr/input/input2 E: EV=40001 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E: SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8835073 P: /devices/platform/pcspkr/input/input2/event2 N: input/event2 S: input/by-path/platform-pcspkr-event-spkr E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E: DEVNAME=/dev/input/event2 E: DEVPATH=/devices/platform/pcspkr/input/input2/event2 E: ID_INPUT=1 E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=66 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=8848892 P: /devices/virtual/input/input11 E: DEVPATH=/devices/virtual/input/input11 E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=89662102 P: /devices/virtual/input/input11/event11 N: input/event11 E: BACKSPACE=guess E: DEVNAME=/dev/input/event11 E: DEVPATH=/devices/virtual/input/input11/event11 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: MAJOR=13 E: MINOR=75 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=89665165 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, P: /devices/virtual/input/input6 E: DEVPATH=/devices/virtual/input/input6 E: EV=33 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: KEY=40 0 0 0 10007 0 0 2100400 0 0 0 0 E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5, E: MSC=10 E: NAME="HP WMI hotkeys" E: PHYS="wmi/input0" E: PRODUCT=19/0/0/0 E: PROP=0 E: SUBSYSTEM=input E: SW=22 E: UDEV_LOG=3 E: USEC_INITIALIZED=9426030 P: /devices/virtual/input/input6/event6 N: input/event6 E: BACKSPACE=guess E: DEVNAME=/dev/input/event6 E: DEVPATH=/devices/virtual/input/input6/event6 E: DMI_VENDOR=Hewlett-Packard E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: MAJOR=13 E: MINOR=70 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=9428536 E: XKBLAYOUT=us,ru E: XKBMODEL=pc105 E: XKBOPTIONS=grp:caps_toggle,grp_led:scroll E: XKBVARIANT=, DRM Information from dmesg: --------------------------- [ 1.097841] Linux agpgart interface v0.103 [ 1.097972] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.098061] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 1.098564] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.098720] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 9.825420] [drm] Initialized drm 1.1.0 20060810 [ 10.159872] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 10.159876] [drm] Driver supports precise vblank timestamp query. [ 10.681784] [drm] initialized overlay support [ 10.924580] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 10.925214] fbcon: inteldrmfb (fb0) is primary device [ 11.092406] fb0: inteldrmfb frame buffer device [ 11.092409] drm: registered panic notifier [ 11.098982] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (500, 'oldstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.13-21 ii libdrm-intel1 2.4.28-1 ii libdrm2 2.4.28-1 ii libpciaccess0 0.12.1-2 ii libudev0 175-3 ii libx11-6 2:1.4.4-4 ii libx11-xcb1 2:1.4.4-4 ii libxcb-dri2-0 1.7-4 ii libxcb-util0 0.3.8-1 ii libxcb1 1.7-4 ii libxext6 2:1.3.0-3 ii libxfixes3 1:5.0-4 ii libxv1 2:1.0.6-2 ii libxvmc1 2:1.0.6-1 ii xserver-xorg-core [xorg-video-abi-11] 2:1.11.2.901-1 xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Cyril Brulebois <kibi@debian.org>, 651623-done@bugs.debian.org
- Cc: Gonéri Le Bouder <goneri@rulezlan.org>, Roman Sakal <sakalr@gmail.com>
- Subject: Re: Bug#651623: intel_uxa_prepare_access: bo map failed: Cannot allocate memory
- From: Julien Cristau <jcristau@debian.org>
- Date: Sun, 18 Aug 2013 03:04:48 +0200
- Message-id: <20130818010448.GA25127@betterave.cristau.org>
- In-reply-to: <20111211013516.GB17016@mraw.org>
- References: <4ee38ded.cd020e0a.49b7.ffffe79f@mx.google.com> <20111211001442.GA28651@localhost> <20111211013516.GB17016@mraw.org>
On Sun, Dec 11, 2011 at 02:35:16 +0100, Cyril Brulebois wrote: > Gonéri Le Bouder <goneri@rulezlan.org> (11/12/2011): > > On Sat, Dec 10, 2011 at 08:50:50PM +0300, Roman Sakal wrote: > > > Package: xserver-xorg-video-intel > > > Version: 2:2.17.0-1 > > > Severity: important > > I've the same probleme since the 2.17 upgrade. Here a backtrace: > > > > libdrm-intel1 2.4.28-1 > > xserver-xorg-video-intel 2:2.17.0-1 > > xserver-xorg 1:7.6+9 > > xserver-xorg-core 2:1.11.2.901-1 > > I think we have patches for this on the driver side (in git master), but > you should be getting a functional setup by downgrading libdrm* to > 2.4.27*. See #651316. I'm still waiting for some feedback (see for > example https://bugs.freedesktop.org/43704) to decide what to do with > it. > Hopefully this is all fixed by now. If not, please report any remaining issues upstream per https://01.org/linuxgraphics/documentation/how-report-bugs-0 Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---