Bug#673923: xserver-xorg: With VGA KVM Switch VGA Port Reports Disconnected; Unable to Force Connected Status
Package: xserver-xorg
Version: 1:7.6+13
Severity: normal
I have a laptop for which a secondary vga monitor is detected correctly when attached directly, but through a KVM switch the VGA1 is reported as disconnected. This is even though if I first connect directly then switch to through KVM the secondary VGA monitor does display background image and windows can be moved onto part of the vga monitor (i.e. the hardware is capable of driving the monitor).
The issue really is that the window system doesn't behave correctly on the secondary monitor because it is reported as disconnected (e.g. windows must still be partially on the primary windows since the windows system thinks the secondary display doesn't exist, even though the windows is being displayed on the monitor) and that it's impossible to get any display without first connecting directly.
A solution would be permit (e.g. through xrandr) the forcing of the connection state to connected. I suspect part of the issue is that EDID is not correctly read through the KVM, but that's not a major issue because you can create modes and assign them to a display device, the only piece that's missing for forcing the display to work is forcing connected status (and turning the monitor on when doing so, so that a direct connection first is not necessary).
Is this possible, or is there an alternate solution that will allow for driving a display where the autodetect fails but you need a dynamic connection (i.e. not in xorg.conf)?
Regards,
Daniel
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 5 08:36 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2085616 May 6 20:17 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.2.0-2-amd64 (Debian 3.2.16-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Mon Apr 30 05:20:23 UTC 2012
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 33103 May 17 10:20 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 39363 May 21 23:21 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 45.086]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 45.086] X Protocol Version 11, Revision 0
[ 45.086] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
[ 45.086] Current Operating System: Linux calordiman 3.2.0-2-amd64 #1 SMP Mon Apr 30 05:20:23 UTC 2012 x86_64
[ 45.086] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/calordiman-root ro quiet
[ 45.086] Build Date: 07 May 2012 12:15:23AM
[ 45.086] xorg-server 2:1.12.1-2 (Cyril Brulebois <kibi@debian.org>)
[ 45.086] Current version of pixman: 0.24.4
[ 45.086] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 45.086] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.087] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 21 23:20:34 2012
[ 45.182] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45.224] (==) No Layout section. Using the first Screen section.
[ 45.224] (==) No screen section available. Using defaults.
[ 45.224] (**) |-->Screen "Default Screen Section" (0)
[ 45.224] (**) | |-->Monitor "<default monitor>"
[ 45.239] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45.240] (==) Automatically adding devices
[ 45.240] (==) Automatically enabling devices
[ 45.368] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 45.368] Entry deleted from font path.
[ 45.426] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 45.426] Entry deleted from font path.
[ 45.426] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 45.426] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45.426] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45.426] (II) Loader magic: 0x7f9cbcfa4ae0
[ 45.426] (II) Module ABI versions:
[ 45.426] X.Org ANSI C Emulation: 0.4
[ 45.426] X.Org Video Driver: 12.0
[ 45.426] X.Org XInput driver : 16.0
[ 45.426] X.Org Server Extension : 6.0
[ 45.427] (--) PCI:*(0:0:2:0) 8086:0046:103c:3674 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 45.427] (II) Open ACPI successful (/var/run/acpid.socket)
[ 45.427] (II) LoadModule: "extmod"
[ 45.458] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45.473] (II) Module extmod: vendor="X.Org Foundation"
[ 45.473] compiled for 1.12.1, module version = 1.0.0
[ 45.473] Module class: X.Org Server Extension
[ 45.473] ABI class: X.Org Server Extension, version 6.0
[ 45.473] (II) Loading extension SELinux
[ 45.473] (II) Loading extension MIT-SCREEN-SAVER
[ 45.473] (II) Loading extension XFree86-VidModeExtension
[ 45.473] (II) Loading extension XFree86-DGA
[ 45.473] (II) Loading extension DPMS
[ 45.473] (II) Loading extension XVideo
[ 45.473] (II) Loading extension XVideo-MotionCompensation
[ 45.473] (II) Loading extension X-Resource
[ 45.473] (II) LoadModule: "dbe"
[ 45.473] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45.487] (II) Module dbe: vendor="X.Org Foundation"
[ 45.487] compiled for 1.12.1, module version = 1.0.0
[ 45.487] Module class: X.Org Server Extension
[ 45.487] ABI class: X.Org Server Extension, version 6.0
[ 45.487] (II) Loading extension DOUBLE-BUFFER
[ 45.487] (II) LoadModule: "glx"
[ 45.487] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45.514] (II) Module glx: vendor="X.Org Foundation"
[ 45.514] compiled for 1.12.1, module version = 1.0.0
[ 45.514] ABI class: X.Org Server Extension, version 6.0
[ 45.514] (==) AIGLX enabled
[ 45.514] (II) Loading extension GLX
[ 45.514] (II) LoadModule: "record"
[ 45.514] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45.556] (II) Module record: vendor="X.Org Foundation"
[ 45.556] compiled for 1.12.1, module version = 1.13.0
[ 45.556] Module class: X.Org Server Extension
[ 45.556] ABI class: X.Org Server Extension, version 6.0
[ 45.556] (II) Loading extension RECORD
[ 45.556] (II) LoadModule: "dri"
[ 45.557] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45.593] (II) Module dri: vendor="X.Org Foundation"
[ 45.593] compiled for 1.12.1, module version = 1.0.0
[ 45.593] ABI class: X.Org Server Extension, version 6.0
[ 45.593] (II) Loading extension XFree86-DRI
[ 45.593] (II) LoadModule: "dri2"
[ 45.594] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45.595] (II) Module dri2: vendor="X.Org Foundation"
[ 45.595] compiled for 1.12.1, module version = 1.2.0
[ 45.595] ABI class: X.Org Server Extension, version 6.0
[ 45.595] (II) Loading extension DRI2
[ 45.595] (==) Matched intel as autoconfigured driver 0
[ 45.595] (==) Matched vesa as autoconfigured driver 1
[ 45.595] (==) Matched fbdev as autoconfigured driver 2
[ 45.595] (==) Assigned the driver to the xf86ConfigLayout
[ 45.595] (II) LoadModule: "intel"
[ 45.595] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45.627] (II) Module intel: vendor="X.Org Foundation"
[ 45.627] compiled for 1.12.1, module version = 2.18.0
[ 45.627] Module class: X.Org Video Driver
[ 45.627] ABI class: X.Org Video Driver, version 12.0
[ 45.627] (II) LoadModule: "vesa"
[ 45.628] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 45.642] (II) Module vesa: vendor="X.Org Foundation"
[ 45.642] compiled for 1.12.1, module version = 2.3.1
[ 45.642] Module class: X.Org Video Driver
[ 45.642] ABI class: X.Org Video Driver, version 12.0
[ 45.642] (II) LoadModule: "fbdev"
[ 45.642] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 45.651] (II) Module fbdev: vendor="X.Org Foundation"
[ 45.651] compiled for 1.12.1, module version = 0.4.2
[ 45.651] ABI class: X.Org Video Driver, version 12.0
[ 45.651] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 45.651] (II) VESA: driver for VESA chipsets: vesa
[ 45.651] (II) FBDEV: driver for framebuffer: fbdev
[ 45.651] (++) using VT number 7
[ 45.654] (WW) Falling back to old probe method for vesa
[ 45.655] (WW) Falling back to old probe method for fbdev
[ 45.655] (II) Loading sub module "fbdevhw"
[ 45.655] (II) LoadModule: "fbdevhw"
[ 45.655] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 45.663] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 45.663] compiled for 1.12.1, module version = 0.0.2
[ 45.663] ABI class: X.Org Video Driver, version 12.0
[ 45.663] drmOpenDevice: node name is /dev/dri/card0
[ 45.663] drmOpenDevice: open result is 9, (OK)
[ 45.663] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 45.663] drmOpenDevice: node name is /dev/dri/card0
[ 45.663] drmOpenDevice: open result is 9, (OK)
[ 45.664] drmOpenByBusid: drmOpenMinor returns 9
[ 45.664] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 45.664] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45.664] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.664] (==) intel(0): RGB weight 888
[ 45.664] (==) intel(0): Default visual is TrueColor
[ 45.664] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 45.664] (--) intel(0): Chipset: "Arrandale"
[ 45.664] (**) intel(0): Relaxed fencing enabled
[ 45.664] (**) intel(0): Wait on SwapBuffers? enabled
[ 45.664] (**) intel(0): Triple buffering? enabled
[ 45.664] (**) intel(0): Framebuffer tiled
[ 45.664] (**) intel(0): Pixmaps tiled
[ 45.664] (**) intel(0): 3D buffers tiled
[ 45.664] (**) intel(0): SwapBuffers wait enabled
[ 45.664] (==) intel(0): video overlay key set to 0x101fe
[ 45.664] (II) intel(0): Output LVDS1 has no monitor section
[ 45.666] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 45.728] (II) intel(0): Output VGA1 has no monitor section
[ 45.751] (II) intel(0): Output HDMI1 has no monitor section
[ 45.808] (II) intel(0): Output DP1 has no monitor section
[ 45.808] (II) intel(0): EDID for output LVDS1
[ 45.808] (II) intel(0): Manufacturer: SEC Model: 4351 Serial#: 0
[ 45.808] (II) intel(0): Year: 2008 Week: 0
[ 45.808] (II) intel(0): EDID Version: 1.3
[ 45.808] (II) intel(0): Digital Display Input
[ 45.808] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 45.808] (II) intel(0): Gamma: 2.20
[ 45.808] (II) intel(0): No DPMS capabilities specified
[ 45.808] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 45.808] (II) intel(0): First detailed timing is preferred mode
[ 45.808] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 45.808] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 45.808] (II) intel(0): Manufacturer's mask: 0
[ 45.808] (II) intel(0): Supported detailed timing:
[ 45.808] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 45.808] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 45.808] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 45.808] (II) intel(0): Unknown vendor-specific block f
[ 45.808] (II) intel(0): SAMSUNG
[ 45.808] (II) intel(0): 156AT05-307
[ 45.808] (II) intel(0): EDID (in hex):
[ 45.808] (II) intel(0): 00ffffffffffff004ca3514300000000
[ 45.808] (II) intel(0): 00120103802213780a87f594574f8c27
[ 45.808] (II) intel(0): 27505400000001010101010101010101
[ 45.808] (II) intel(0): 010101010101121b567250000c303020
[ 45.808] (II) intel(0): 250058c2100000190000000f00000000
[ 45.808] (II) intel(0): 00000000001eb4027400000000fe0053
[ 45.808] (II) intel(0): 414d53554e470a2020202020000000fe
[ 45.808] (II) intel(0): 00313536415430352d3330370a200017
[ 45.808] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 45.808] (II) intel(0): Printing DDC gathered Modelines:
[ 45.808] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 45.809] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 45.809] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 45.809] (II) intel(0): Printing probed modes for output LVDS1
[ 45.809] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 45.809] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 45.809] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 45.809] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 45.809] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 45.809] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 45.809] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 45.872] (II) intel(0): EDID for output VGA1
[ 45.872] (II) intel(0): Manufacturer: SAM Model: 1057 Serial#: 1146368311
[ 45.872] (II) intel(0): Year: 2000 Week: 35
[ 45.872] (II) intel(0): EDID Version: 1.1
[ 45.872] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 45.872] (II) intel(0): Sync: Separate
[ 45.872] (II) intel(0): Max Image Size [cm]: horiz.: 32 vert.: 24
[ 45.872] (II) intel(0): Gamma: 2.26
[ 45.872] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 45.872] (II) intel(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600
[ 45.872] (II) intel(0): blueX: 0.142 blueY: 0.057 whiteX: 0.283 whiteY: 0.298
[ 45.872] (II) intel(0): Supported established timings:
[ 45.872] (II) intel(0): 720x400@70Hz
[ 45.872] (II) intel(0): 720x400@88Hz
[ 45.872] (II) intel(0): 640x480@60Hz
[ 45.872] (II) intel(0): 640x480@67Hz
[ 45.872] (II) intel(0): 640x480@72Hz
[ 45.872] (II) intel(0): 640x480@75Hz
[ 45.872] (II) intel(0): 800x600@56Hz
[ 45.872] (II) intel(0): 800x600@60Hz
[ 45.872] (II) intel(0): 800x600@72Hz
[ 45.872] (II) intel(0): 800x600@75Hz
[ 45.872] (II) intel(0): 832x624@75Hz
[ 45.872] (II) intel(0): 1024x768@87Hz (interlaced)
[ 45.872] (II) intel(0): 1024x768@60Hz
[ 45.872] (II) intel(0): 1024x768@70Hz
[ 45.872] (II) intel(0): 1024x768@75Hz
[ 45.872] (II) intel(0): Manufacturer's mask: 0
[ 45.872] (II) intel(0): Supported standard timings:
[ 45.872] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 45.872] (II) intel(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 45.872] (II) intel(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 45.872] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 45.872] (II) intel(0): Supported detailed timing:
[ 45.872] (II) intel(0): clock: 56.2 MHz Image Size: 306 x 230 mm
[ 45.872] (II) intel(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
[ 45.872] (II) intel(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
[ 45.872] (II) intel(0): Supported detailed timing:
[ 45.872] (II) intel(0): clock: 94.5 MHz Image Size: 306 x 230 mm
[ 45.872] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
[ 45.873] (II) intel(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
[ 45.873] (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 115 MHz
[ 45.873] (II) intel(0): Serial No: HCCN801306
[ 45.873] (II) intel(0): EDID (in hex):
[ 45.873] (II) intel(0): 00ffffffffffff004c2d571037315444
[ 45.873] (II) intel(0): 230a01016820187ee81269a552499924
[ 45.873] (II) intel(0): 0e484cfffe0031594559615981800101
[ 45.873] (II) intel(0): 010101010101f91520f830581f202040
[ 45.873] (II) intel(0): 130032e61000001eea24006041002830
[ 45.873] (II) intel(0): 3060130032e61000001e000000fd0032
[ 45.873] (II) intel(0): a01e460b000a202020202020000000ff
[ 45.873] (II) intel(0): 004843434e3830313330360a202000ba
[ 45.873] (II) intel(0): Printing probed modes for output VGA1
[ 45.873] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 45.873] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 45.873] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 45.873] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 45.873] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 45.873] (II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz e)
[ 45.873] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 45.873] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 45.873] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 45.873] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 45.873] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 45.873] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 45.873] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 45.873] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 45.873] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 45.873] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 45.873] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 45.873] (II) intel(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz e)
[ 45.873] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 45.897] (II) intel(0): EDID for output HDMI1
[ 45.948] (II) intel(0): EDID for output DP1
[ 45.948] (II) intel(0): Output LVDS1 connected
[ 45.948] (II) intel(0): Output VGA1 connected
[ 45.948] (II) intel(0): Output HDMI1 disconnected
[ 45.948] (II) intel(0): Output DP1 disconnected
[ 45.948] (II) intel(0): Using fuzzy aspect match for initial modes
[ 45.948] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 45.948] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 45.948] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 45.948] (II) intel(0): Kernel page flipping support detected, enabling
[ 45.948] (**) intel(0): Display dimensions: (340, 190) mm
[ 45.948] (**) intel(0): DPI set to (76, 102)
[ 45.948] (II) Loading sub module "fb"
[ 45.948] (II) LoadModule: "fb"
[ 45.948] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45.987] (II) Module fb: vendor="X.Org Foundation"
[ 45.987] compiled for 1.12.1, module version = 1.0.0
[ 45.987] ABI class: X.Org ANSI C Emulation, version 0.4
[ 45.987] (II) Loading sub module "dri2"
[ 45.987] (II) LoadModule: "dri2"
[ 45.987] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45.987] (II) Module dri2: vendor="X.Org Foundation"
[ 45.987] compiled for 1.12.1, module version = 1.2.0
[ 45.988] ABI class: X.Org Server Extension, version 6.0
[ 45.988] (II) UnloadModule: "vesa"
[ 45.988] (II) Unloading vesa
[ 45.988] (II) UnloadModule: "fbdev"
[ 45.988] (II) Unloading fbdev
[ 45.988] (II) UnloadSubModule: "fbdevhw"
[ 45.988] (II) Unloading fbdevhw
[ 45.988] (==) Depth 24 pixmap format is 32 bpp
[ 45.988] (II) intel(0): [DRI2] Setup complete
[ 45.988] (II) intel(0): [DRI2] DRI driver: i965
[ 45.988] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 46.021] (II) UXA(0): Driver registered support for the following operations:
[ 46.021] (II) solid
[ 46.021] (II) copy
[ 46.021] (II) composite (RENDER acceleration)
[ 46.021] (II) put_image
[ 46.021] (II) get_image
[ 46.021] (==) intel(0): Backing store disabled
[ 46.021] (==) intel(0): Silken mouse enabled
[ 46.021] (II) intel(0): Initializing HW Cursor
[ 46.653] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 46.655] (==) intel(0): DPMS enabled
[ 46.655] (==) intel(0): Intel XvMC decoder enabled
[ 46.655] (II) intel(0): Set up textured video
[ 46.655] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 46.655] (II) intel(0): direct rendering: DRI2 Enabled
[ 46.655] (==) intel(0): hotplug detection: "enabled"
[ 46.655] (--) RandR disabled
[ 46.655] (II) Initializing built-in extension Generic Event Extension
[ 46.655] (II) Initializing built-in extension SHAPE
[ 46.655] (II) Initializing built-in extension MIT-SHM
[ 46.655] (II) Initializing built-in extension XInputExtension
[ 46.655] (II) Initializing built-in extension XTEST
[ 46.655] (II) Initializing built-in extension BIG-REQUESTS
[ 46.655] (II) Initializing built-in extension SYNC
[ 46.655] (II) Initializing built-in extension XKEYBOARD
[ 46.655] (II) Initializing built-in extension XC-MISC
[ 46.655] (II) Initializing built-in extension SECURITY
[ 46.655] (II) Initializing built-in extension XINERAMA
[ 46.655] (II) Initializing built-in extension XFIXES
[ 46.655] (II) Initializing built-in extension RENDER
[ 46.655] (II) Initializing built-in extension RANDR
[ 46.655] (II) Initializing built-in extension COMPOSITE
[ 46.655] (II) Initializing built-in extension DAMAGE
[ 46.656] (II) SELinux: Disabled on system
[ 47.080] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 47.080] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 47.080] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 47.080] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 47.080] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 47.080] (II) AIGLX: Loaded and initialized i965
[ 47.080] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 47.081] (II) intel(0): Setting screen physical size to 270 x 203
[ 50.543] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 50.543] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 50.543] (II) LoadModule: "evdev"
[ 50.559] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 50.577] (II) Module evdev: vendor="X.Org Foundation"
[ 50.577] compiled for 1.12.1, module version = 2.7.0
[ 50.577] Module class: X.Org XInput Driver
[ 50.577] ABI class: X.Org XInput driver, version 16.0
[ 50.577] (II) Using input driver 'evdev' for 'Power Button'
[ 50.577] (**) Power Button: always reports core events
[ 50.577] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 50.578] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 50.578] (--) evdev: Power Button: Found keys
[ 50.578] (II) evdev: Power Button: Configuring as keyboard
[ 50.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 50.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 50.578] (**) Option "xkb_rules" "evdev"
[ 50.578] (**) Option "xkb_model" "pc105"
[ 50.578] (**) Option "xkb_layout" "ca"
[ 50.578] (**) Option "xkb_variant" "eng"
[ 50.578] (**) Option "xkb_options" "compose:rctrl"
[ 50.641] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 50.641] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 50.641] (II) Using input driver 'evdev' for 'Video Bus'
[ 50.641] (**) Video Bus: always reports core events
[ 50.641] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 50.641] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 50.641] (--) evdev: Video Bus: Found keys
[ 50.641] (II) evdev: Video Bus: Configuring as keyboard
[ 50.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 50.641] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 50.641] (**) Option "xkb_rules" "evdev"
[ 50.641] (**) Option "xkb_model" "pc105"
[ 50.641] (**) Option "xkb_layout" "ca"
[ 50.641] (**) Option "xkb_variant" "eng"
[ 50.641] (**) Option "xkb_options" "compose:rctrl"
[ 50.642] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 50.642] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 50.642] (II) Using input driver 'evdev' for 'Power Button'
[ 50.642] (**) Power Button: always reports core events
[ 50.642] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 50.642] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 50.642] (--) evdev: Power Button: Found keys
[ 50.642] (II) evdev: Power Button: Configuring as keyboard
[ 50.642] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 50.642] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 50.642] (**) Option "xkb_rules" "evdev"
[ 50.642] (**) Option "xkb_model" "pc105"
[ 50.642] (**) Option "xkb_layout" "ca"
[ 50.642] (**) Option "xkb_variant" "eng"
[ 50.642] (**) Option "xkb_options" "compose:rctrl"
[ 50.642] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 50.642] (II) No input driver specified, ignoring this device.
[ 50.642] (II) This device may have been added with another device file.
[ 50.643] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event8)
[ 50.643] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[ 50.643] (II) Using input driver 'evdev' for 'HP Webcam-101'
[ 50.643] (**) HP Webcam-101: always reports core events
[ 50.643] (**) evdev: HP Webcam-101: Device: "/dev/input/event8"
[ 50.643] (--) evdev: HP Webcam-101: Vendor 0x4f2 Product 0xb249
[ 50.643] (--) evdev: HP Webcam-101: Found keys
[ 50.643] (II) evdev: HP Webcam-101: Configuring as keyboard
[ 50.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event8"
[ 50.643] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD, id 9)
[ 50.643] (**) Option "xkb_rules" "evdev"
[ 50.643] (**) Option "xkb_model" "pc105"
[ 50.643] (**) Option "xkb_layout" "ca"
[ 50.643] (**) Option "xkb_variant" "eng"
[ 50.643] (**) Option "xkb_options" "compose:rctrl"
[ 50.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 50.643] (II) No input driver specified, ignoring this device.
[ 50.643] (II) This device may have been added with another device file.
[ 50.644] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event11)
[ 50.644] (II) No input driver specified, ignoring this device.
[ 50.644] (II) This device may have been added with another device file.
[ 50.644] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
[ 50.644] (II) No input driver specified, ignoring this device.
[ 50.644] (II) This device may have been added with another device file.
[ 50.644] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
[ 50.644] (II) No input driver specified, ignoring this device.
[ 50.644] (II) This device may have been added with another device file.
[ 50.645] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event1)
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 50.645] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 50.645] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event1"
[ 50.645] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 50.645] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 50.645] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 50.645] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 50.645] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 50.645] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 50.645] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 50.645] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 50.645] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 50.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1/event1"
[ 50.645] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 10)
[ 50.645] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 50.645] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 50.646] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse0)
[ 50.646] (II) No input driver specified, ignoring this device.
[ 50.646] (II) This device may have been added with another device file.
[ 50.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 50.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 50.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 50.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 50.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 50.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 50.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 50.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 50.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 50.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 50.646] (**) Option "xkb_rules" "evdev"
[ 50.646] (**) Option "xkb_model" "pc105"
[ 50.646] (**) Option "xkb_layout" "ca"
[ 50.646] (**) Option "xkb_variant" "eng"
[ 50.646] (**) Option "xkb_options" "compose:rctrl"
[ 50.647] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 50.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 50.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 50.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 50.647] (II) LoadModule: "synaptics"
[ 50.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 50.668] (II) Module synaptics: vendor="X.Org Foundation"
[ 50.668] compiled for 1.12.1, module version = 1.6.0
[ 50.668] Module class: X.Org XInput Driver
[ 50.668] ABI class: X.Org XInput driver, version 16.0
[ 50.668] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 50.668] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 50.668] (**) Option "Device" "/dev/input/event7"
[ 50.840] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 50.840] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 50.840] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 50.844] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 50.844] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 50.844] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 50.844] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 50.844] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 50.844] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 50.844] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 50.844] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 50.844] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 50.845] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 50.845] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 50.845] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 50.846] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 50.846] (II) No input driver specified, ignoring this device.
[ 50.846] (II) This device may have been added with another device file.
[ 50.847] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
[ 50.847] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 50.847] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 50.847] (**) ACPI Virtual Keyboard Device: always reports core events
[ 50.847] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
[ 50.847] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 50.847] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 50.847] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 50.847] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[ 50.847] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[ 50.847] (**) Option "xkb_rules" "evdev"
[ 50.847] (**) Option "xkb_model" "pc105"
[ 50.847] (**) Option "xkb_layout" "ca"
[ 50.847] (**) Option "xkb_variant" "eng"
[ 50.847] (**) Option "xkb_options" "compose:rctrl"
[ 50.848] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 50.848] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 50.848] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 50.848] (**) HP WMI hotkeys: always reports core events
[ 50.848] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event6"
[ 50.848] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 50.848] (--) evdev: HP WMI hotkeys: Found keys
[ 50.848] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 50.848] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 50.848] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 50.848] (**) Option "xkb_rules" "evdev"
[ 50.848] (**) Option "xkb_model" "pc105"
[ 50.848] (**) Option "xkb_layout" "ca"
[ 50.848] (**) Option "xkb_variant" "eng"
[ 50.848] (**) Option "xkb_options" "compose:rctrl"
[ 88.728] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 90.360] (II) intel(0): Printing DDC gathered Modelines:
[ 90.360] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 90.498] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 90.832] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 105.400] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 105.400] (II) intel(0): Printing DDC gathered Modelines:
[ 105.400] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 123.577] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 123.578] (II) intel(0): Printing DDC gathered Modelines:
[ 123.578] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 123.722] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 123.722] (II) intel(0): Printing DDC gathered Modelines:
[ 123.722] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 123.871] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 123.871] (II) intel(0): Printing DDC gathered Modelines:
[ 123.871] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz eP)
[ 124.019] (II) intel(0): Allocated new frame buffer 2688x1024 stride 10752, tiled
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12824312
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13623311
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15048673
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9
N: input/event9
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15051875
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12992981
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13623313
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: UDEV_LOG=3
E: USEC_INITIALIZED=12992933
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13216906
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8
E: EV=3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam-101
E: ID_MODEL_ENC=HP\x20Webcam-101
E: ID_MODEL_ID=b249
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=1204
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._HP_Webcam-101_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v04F2pB249e1204-e0,1,kD4,ramlsfw
E: NAME="HP Webcam-101"
E: PHYS="usb-0000:00:1a.0-1.3/button"
E: PRODUCT=3/4f2/b249/1204
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14402951
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event8
N: input/event8
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._HP_Webcam-101_SN0001-event-if00
S: input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._HP_Webcam-101_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam-101
E: ID_MODEL_ENC=HP\x20Webcam-101
E: ID_MODEL_ID=b249
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.0
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_0
E: ID_REVISION=1204
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._HP_Webcam-101_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14405098
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/pci0000:00/0000:00:1b.0/input/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input10
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0270e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/270/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15164258
P: /devices/pci0000:00/0000:00:1b.0/input/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15167891
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw8,
E: NAME="HDA Intel HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=100
E: UDEV_LOG=3
E: USEC_INITIALIZED=15164588
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15168352
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: UDEV_LOG=3
E: USEC_INITIALIZED=15165080
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15167894
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: UDEV_LOG=3
E: USEC_INITIALIZED=15165579
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=15168100
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC52Be0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech Unifying Device. Wireless PID:1028"
E: PHYS="usb-0000:00:1d.0-1.2:1"
E: PRODUCT=3/46d/c52b/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=14235102
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.2-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.2-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14238101
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if02-mouse
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.2-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.2-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.0003/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.2:1.2
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_2_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14237943
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=20000 20 0 0 500f02100002 3803078f900d401 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D4,D9,E0,E1,E2,E3,EC,EE,185,1D1,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab83
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=12781153
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13623510
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/platform/i8042/serio1/input/input7
E: ABS=260800011000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input7
E: EV=b
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 30000 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14151794
P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14237807
P: /devices/platform/i8042/serio1/input/input7/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse1
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14238320
P: /devices/platform/pcspkr/input/input5
E: DEVPATH=/devices/platform/pcspkr/input/input5
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13202764
P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=13204812
P: /devices/virtual/input/input14
E: DEVPATH=/devices/virtual/input/input14
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=31228058
P: /devices/virtual/input/input14/event14
N: input/event14
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/virtual/input/input14/event14
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=31230200
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
P: /devices/virtual/input/input6
E: DEVPATH=/devices/virtual/input/input6
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=4000000000 0 1000700000000 2100400 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: UDEV_LOG=3
E: USEC_INITIALIZED=14029729
P: /devices/virtual/input/input6/event6
N: input/event6
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/virtual/input/input6/event6
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=14031548
E: XKBLAYOUT=ca
E: XKBMODEL=pc105
E: XKBOPTIONS=compose:rctrl
E: XKBVARIANT=eng
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 1.640162] Linux agpgart interface v0.103
[ 1.640236] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.640324] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.641054] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.641217] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 13.940125] [drm] Initialized drm 1.1.0 20060810
[ 14.201584] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.201586] [drm] Driver supports precise vblank timestamp query.
[ 14.745762] fbcon: inteldrmfb (fb0) is primary device
[ 15.180579] fb0: inteldrmfb frame buffer device
[ 15.180582] drm: registered panic notifier
[ 15.196486] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'stable-updates'), (1, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii libc6 2.13-32
ii x11-xkb-utils 7.7~1
ii xkb-data 2.5.1-1
ii xserver-xorg-core 2:1.12.1-2
ii xserver-xorg-input-all 1:7.6+13
ii xserver-xorg-input-evdev [xorg-driver-input 1:2.7.0-1+b1
ii xserver-xorg-input-synaptics [xorg-driver-i 1.6.0-1
ii xserver-xorg-input-wacom [xorg-driver-input 0.12.0-1+b1
ii xserver-xorg-video-all 1:7.6+13
ii xserver-xorg-video-apm [xorg-driver-video] 1:1.2.3-3
ii xserver-xorg-video-ark [xorg-driver-video] 1:0.7.4-1+b1
ii xserver-xorg-video-ati [xorg-driver-video] 1:6.14.4-2+b1
ii xserver-xorg-video-chips [xorg-driver-video 1:1.2.4-2
ii xserver-xorg-video-cirrus [xorg-driver-vide 1:1.4.0-1+b1
ii xserver-xorg-video-fbdev [xorg-driver-video 1:0.4.2-4+b3
ii xserver-xorg-video-i128 [xorg-driver-video] 1:1.3.5-1+b1
ii xserver-xorg-video-intel [xorg-driver-video 2:2.18.0-2+b1
ii xserver-xorg-video-mach64 [xorg-driver-vide 6.9.1-2
ii xserver-xorg-video-mga [xorg-driver-video] 1:1.4.13.dfsg-4+b1
ii xserver-xorg-video-neomagic [xorg-driver-vi 1:1.2.5-2+b3
ii xserver-xorg-video-nouveau [xorg-driver-vid 1:0.0.16+git20120322+ab7291d-1
ii xserver-xorg-video-openchrome [xorg-driver- 1:0.2.904+svn1050-1+b1
ii xserver-xorg-video-r128 [xorg-driver-video] 6.8.2-1
ii xserver-xorg-video-radeon [xorg-driver-vide 1:6.14.4-2+b1
ii xserver-xorg-video-rendition [xorg-driver-v 1:4.2.4-3
ii xserver-xorg-video-s3 [xorg-driver-video] 1:0.6.3-4+b3
ii xserver-xorg-video-s3virge [xorg-driver-vid 1:1.10.4-5
ii xserver-xorg-video-savage [xorg-driver-vide 1:2.3.4-1
ii xserver-xorg-video-siliconmotion [xorg-driv 1:1.7.6-1
ii xserver-xorg-video-sis [xorg-driver-video] 1:0.10.4-1
ii xserver-xorg-video-sisusb [xorg-driver-vide 1:0.9.4-3
ii xserver-xorg-video-tdfx [xorg-driver-video] 1:1.4.4-1
ii xserver-xorg-video-trident [xorg-driver-vid 1:1.3.5-1
ii xserver-xorg-video-tseng [xorg-driver-video 1:1.2.4-3
ii xserver-xorg-video-vesa [xorg-driver-video] 1:2.3.1-1+b1
ii xserver-xorg-video-vmware [xorg-driver-vide 1:12.0.2-1+b1
ii xserver-xorg-video-voodoo [xorg-driver-vide 1:1.2.4-2+b3
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.11.2-1
xserver-xorg suggests no packages.
-- no debconf information
Reply to: