Bug#596805: marked as done (i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop.")

To: Adrian von Bidder <adrian.vonbidder@sygroup.ch>
Subject: Bug#596805: marked as done (i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop.")
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Wed, 23 Feb 2011 06:54:09 +0000
Message-id: <[🔎] handler.596805.D596805.129844394816266.ackdone@bugs.debian.org>
References: <201102230746.32463@sygroup.ch> <201009141118.18566@sygroup.ch>

Your message dated Wed, 23 Feb 2011 07:46:28 +0100
with message-id <201102230746.32463@sygroup.ch>
and subject line Re: Bug#596805: i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop."
has caused the Debian Bug report #596805,
regarding i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop."
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
596805: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=596805
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: submit@bugs.debian.org
Subject: i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop."
From: Adrian von Bidder <adrian.vonbidder@sygroup.ch>
Date: Tue, 14 Sep 2010 11:18:18 +0200
Message-id: <201009141118.18566@sygroup.ch>

Package: xserver-xorg-video-intel
Version: 2:2.12.0+legacy1-1

Heyho!

We've got ca. 60 machines with a specific intel chip that has proven to 
be very problematic, unfortunately....  (So far we've got other computers
as well, so we can make do.)

After a while, display suddenly becomes corrupted and a short time after, 
the system locks up completely (not sure, I *think* only X, ssh is still 
ok.)

Xorg.log -> [1]

Ends with:
(EE) intel(0): Detected a hung GPU, disabling acceleration.
[mi] EQ overflowing. The server is probably stuck in an infinite loop.
(+ backtrace, without symbols.)

I'll try to get a backtrace with xserver-xorg-video-intel-dbg from the 
person who has this computer, and dmesg output as well.

00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA 
controller])
        Subsystem: Compaq Computer Corporation Device 00b8
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Memory at fc400000 (32-bit, non-prefetchable) [size=512K]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [d0] Power Management version 1
        Kernel driver in use: i915

Kernel 2.6.35-1~experimental.1

libdrm* all at 2.4.18-6
xserver-xorg 1:7.5+6
xserver-xorg-core 2:1.7.7-4

Any other info that may help?

cheers
-- vbi

[1]
+++

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 i686 Debian
Current Operating System: Linux a-010-05 2.6.35-trunk-686 #1 SMP Fri Aug 6 14:49:07 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-trunk-686 root=UUID=3db4e10d-cbf5-4259-8200-6de687163152 ro quiet
Build Date: 24 August 2010  02:59:40PM
xorg-server 2:1.7.7-4 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 14 06:29:26 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81eaca0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2562:0e11:00b8 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 1, Mem @ 
0xf0000000/134217728, 0xfc400000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.12.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 0.4.2
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 845G
(--) intel(0): Chipset: "845G"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: HWP  Model: 280b  Serial#: 16843009
(II) intel(0): Year: 2008  Week: 45
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 47  vert.: 29
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.645 redY: 0.336   greenX: 0.278 greenY: 0.617
(II) intel(0): blueX: 0.145 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
(II) intel(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) intel(0): #4: hsize: 1600  vsize 1000  refresh: 60  vid: 169
(II) intel(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 146.2 MHz   Image Size:  465 x 291 mm
(II) intel(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) intel(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 165 MHz
(II) intel(0): Monitor name: HP w2216
(II) intel(0): Serial No: CZT84502K4
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0022f00b2801010101
(II) intel(0): 	2d120103682f1d78ee0405a556479e25
(II) intel(0): 	155054a56b807100814081809500a900
(II) intel(0): 	b3000101010121399030621a274068b0
(II) intel(0): 	3600d1231100001c000000fd00304c18
(II) intel(0): 	5310000a202020202020000000fc0048
(II) intel(0): 	502077323231360a20202020000000ff
(II) intel(0): 	00435a5438343530324b340a2020007b
(II) intel(0): EDID vendor "HWP", prod id 10251
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1600x1000"x60.0  133.16  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA1 using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (470, 290) mm
(**) intel(0): DPI set to (90, 91)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Allocated new frame buffer 1728x1050 stride 8192, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ch"
(**) Option "xkb_options" "compose:lwin,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ch"
(**) Option "xkb_options" "compose:lwin,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
(II) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Areson USB Device (/dev/input/event1)
(**) Areson USB Device: Applying InputClass "evdev pointer catchall"
(**) Areson USB Device: always reports core events
(**) Areson USB Device: Device: "/dev/input/event1"
(II) Areson USB Device: Found 12 mouse buttons
(II) Areson USB Device: Found scroll wheel(s)
(II) Areson USB Device: Found relative axes
(II) Areson USB Device: Found x and y relative axes
(II) Areson USB Device: Configuring as mouse
(**) Areson USB Device: YAxisMapping: buttons 4 and 5
(**) Areson USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Areson USB Device" (type: MOUSE)
(II) Areson USB Device: initialized for relative axes.
(II) config/udev: Adding input device Areson USB Device (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device LITE-ON Technology USB NetVista Full Width Keyboard. (/dev/input/event2)
(**) LITE-ON Technology USB NetVista Full Width Keyboard.: Applying InputClass "evdev keyboard catchall"
(**) LITE-ON Technology USB NetVista Full Width Keyboard.: always reports core events
(**) LITE-ON Technology USB NetVista Full Width Keyboard.: Device: "/dev/input/event2"
(II) LITE-ON Technology USB NetVista Full Width Keyboard.: Found keys
(II) LITE-ON Technology USB NetVista Full Width Keyboard.: Configuring as keyboard
(II) XINPUT: Adding extended input device "LITE-ON Technology USB NetVista Full Width Keyboard." (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "ch"
(**) Option "xkb_options" "compose:lwin,terminate:ctrl_alt_bksp"
(II) intel(0): EDID vendor "HWP", prod id 10251
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
(II) intel(0): EDID vendor "HWP", prod id 10251
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1600x1000"x60.0  133.14  1600 1704 1872 2144  1000 1001 1004 1035 -hsync +vsync (62.1 kHz)
(EE) intel(0): Detected a hung GPU, disabling acceleration.
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80d920b]
1: /usr/bin/X (mieqEnqueue+0x1ab) [0x80d7ccb]
2: /usr/bin/X (xf86PostMotionEventP+0xd2) [0x80b8312]
3: /usr/lib/xorg/modules/input/evdev_drv.so (0xb70be000+0x4831) [0xb70c2831]
4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb70be000+0x4b26) [0xb70c2b26]
5: /usr/bin/X (0x8048000+0x7306f) [0x80bb06f]
6: /usr/bin/X (0x8048000+0x104994) [0x814c994]
7: (vdso) (__kernel_sigreturn+0x0) [0xb787d400]
8: /usr/lib/libpixman-1.so.0 (0xb77a9000+0x4d0c0) [0xb77f60c0]
9: /usr/lib/libpixman-1.so.0 (0xb77a9000+0x149e3) [0xb77bd9e3]
10: /usr/lib/libpixman-1.so.0 (pixman_blt+0x78) [0xb77e33a8]
11: /usr/lib/xorg/modules/libfb.so (fbCopyNtoN+0x24d) [0xb73734dd]
12: /usr/bin/X (miCopyRegion+0x21b) [0x81b70db]
13: /usr/bin/X (miDoCopy+0x46d) [0x81b761d]
14: /usr/lib/xorg/modules/libfb.so (fbCopyArea+0x78) [0xb7372a48]
15: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb738e000+0x2e695) [0xb73bc695]
16: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb738e000+0x25575) [0xb73b3575]
17: /usr/bin/X (0x8048000+0xc05a3) [0x81085a3]
18: /usr/bin/X (0x8048000+0x35ee5) [0x807dee5]
19: /usr/bin/X (0x8048000+0x38067) [0x8080067]
20: /usr/bin/X (0x8048000+0x1e92a) [0x806692a]
21: /lib/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0xb75b6c76]
22: /usr/bin/X (0x8048000+0x1e511) [0x8066511]
+++

-- 
SyGroup GmbH
Adrian von Bidder

Linux Lösungen mit System
Tel: +41 (61) 333 80 33     Güterstrasse 86
Fax: +41 (61) 383 14 67     4053 Basel
http://www.sygroup.ch       adrian.vonbidder@sygroup.ch

Attachment: signature.asc
Description: This is a digitally signed message part.

--- End Message ---

--- Begin Message ---

To: Cyril Brulebois <kibi@debian.org>

Cc: 596805-done@bugs.debian.org

Subject: Re: Bug#596805: i845: "Detected a hung GPU, disabling acceleration." / "EQ overflowing. The server is probably stuck in an infinite loop."

From: Adrian von Bidder <adrian.vonbidder@sygroup.ch>

Date: Wed, 23 Feb 2011 07:46:28 +0100

Message-id: <201102230746.32463@sygroup.ch>

In-reply-to: <[🔎] 20110222232033.GB27856@debian.org>

References: <201009141118.18566@sygroup.ch> <[🔎] 20110222232033.GB27856@debian.org>
Hi Cyril,

On Wednesday 23 February 2011 00:20:33 Cyril Brulebois wrote:
> Is it going better with an up-to-date squeeze system? Or maybe with
> sid? Make sure you check the FAQ entry about intel on:
>   http://pkg-xorg.alioth.debian.org/faq/general.html

Thanks for your reply.  KDE is unberarably slow on vesa or fbdev, we've 
tried that, but yes, it got better with more recent xorg drivers.  

Last I heard (since I changed my job, I'm not in touch with that 
customer anymore), the problem was rare enough so that the machines 
could be used, but they still hang every few days.

Closing, since the bug is known upstream anyway and I won't be able to 
closely track it.

cheers
-- vbi

-- 
SyGroup GmbH
Adrian von Bidder

Linux Lösungen mit System
Tel: +41 (61) 333 80 33     Güterstrasse 86
Fax: +41 (61) 383 14 67     4053 Basel
http://www.sygroup.ch       adrian.vonbidder@sygroup.ch
Attachment: signature.asc
Description: This is a digitally signed message part.

--- End Message ---

Reply to:

Prev by Date: Bug#608782: x server failed
Next by Date: Bug#586485: Regression: can't resume after suspend-to-RAM
Previous by thread: Bug#529072: marked as done (xserver-xorg-video-intel: crash when suspending)
Next by thread: Bug#554427: xserver-xorg-video-intel: repaint problems with transient windows
Index(es):
- Date
- Thread