Your message dated Fri, 28 Jan 2011 13:05:28 +0100 with message-id <20110128120528.GL28694@debian.org> and subject line Re: Bug#516290: xserver-xorg: X crashed when switching from VT to X has caused the Debian Bug report #516290, regarding xserver-xorg: X crashed when switching from VT to X to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 516290: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516290 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg: X crashed when switching from VT to X
- From: Simon Danner <simon@danner-urloffen.de>
- Date: Fri, 20 Feb 2009 13:32:17 +0100
- Message-id: <20090220123217.8388.31661.reportbug@localhost>
Package: xserver-xorg Version: 1:7.4~5 Severity: important X suddenly crashed after switching from a VT to X. I did this a lot of times before without crashing, so it's not easily reproducabel. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 2008-05-24 20:19 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1690172 2009-02-12 12:25 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 11) /etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 1211 2009-02-14 14:12 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" Driver "savage" Option "DRI" "false" EndSection Section "Serverflags" Option "DontZap" "false" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 35673 2009-02-20 13:24 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/laptop:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.902 (1.6.0 RC 2) Release Date: 2009-1-30 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18.3xenu i686 Debian Current Operating System: Linux laptop 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 Build Date: 12 February 2009 11:13:54AM xorg-server 2:1.5.99.902-1 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 20 10:51:32 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (**) Option "DontZap" "false" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x6a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@1:0:0) S3 Inc. 86C270-294 Savage/IX-MV rev 17, Mem @ 0xf0000000/0, BIOS @ 0x????????/65536 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "savage" (II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so (II) Module savage: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) SAVAGE: driver (version 2.2.1) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) SAVAGE(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 16/16 (==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16 (==) SAVAGE(0): RGB weight 565 (==) SAVAGE(0): Default visual is TrueColor (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (**) SAVAGE(0): Option "DRI" "false" (==) SAVAGE(0): Using XAA acceleration architecture (==) SAVAGE(0): Using HW cursor (==) SAVAGE(0): Using video BIOS to set modes (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 8192 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1 (--) SAVAGE(0): Chip: id 8c12, "Savage/IX-MV" (--) SAVAGE(0): Engine: "MobileSavage" (--) SAVAGE(0): AGP card detected (==) SAVAGE(0): Using AGP DMA (II) SAVAGE(0): Savage3D/MX/IX does not support command DMA. (==) SAVAGE(0): Will try only vertex DMA mode (==) SAVAGE(0): Using AGP 1x mode (==) SAVAGE(0): Using 16 MB AGP aperture (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) SAVAGE(0): probed videoram: 8192k (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) SAVAGE(0): No DDC signal (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) SAVAGE(0): I2C bus "I2C bus" initialized. (II) SAVAGE(0): I2C device "I2C bus:E-EDID segment register" registered at address 0x60. (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0. (--) SAVAGE(0): Detected current MCLK value of 100.227 MHz (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active (--) SAVAGE(0): - Limiting video mode to 1024x768 (--) SAVAGE(0): Found 12 modes at this depth: [10e] 320 x 200, 70Hz [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz [11d] 640 x 400, 70Hz [122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz [133] 320 x 240, 72Hz [143] 400 x 300, 72Hz [153] 512 x 384, 70Hz [173] 720 x 480, 75Hz [178] 720 x 576, 75Hz (II) SAVAGE(0): Configured Monitor: Using hsync range of 31.50-47.82 kHz (II) SAVAGE(0): Configured Monitor: Using vrefresh range of 56.00-59.92 Hz (II) SAVAGE(0): Configured Monitor: Using maximum pixel clock of 63.50 MHz (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768 (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz. (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name) (--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz. (II) SAVAGE(0): Not using default mode "320x175" (no mode of this name) (--) SAVAGE(0): Chose mode 11d at 70Hz. (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range) (--) SAVAGE(0): Chose mode 10e at 70Hz. (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range) (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz. (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name) (--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz. (II) SAVAGE(0): Not using default mode "360x200" (no mode of this name) (--) SAVAGE(0): Chose mode 111 at 60Hz. (--) SAVAGE(0): Chose mode 133 at 72Hz. (--) SAVAGE(0): Chose mode 111 at 72Hz. (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (--) SAVAGE(0): Chose mode 133 at 72Hz. (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (--) SAVAGE(0): Chose mode 111 at 75Hz. (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (--) SAVAGE(0): Chose mode 133 at 72Hz. (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (--) SAVAGE(0): Chose mode 111 at 85Hz. (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) (--) SAVAGE(0): Chose mode 133 at 72Hz. (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) (--) SAVAGE(0): Chose mode 114 at 60Hz. (--) SAVAGE(0): Chose mode 143 at 72Hz. (--) SAVAGE(0): Chose mode 114 at 60Hz. (--) SAVAGE(0): Chose mode 143 at 72Hz. (--) SAVAGE(0): Chose mode 114 at 72Hz. (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) (--) SAVAGE(0): Chose mode 143 at 72Hz. (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) (--) SAVAGE(0): Chose mode 114 at 75Hz. (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) (--) SAVAGE(0): Chose mode 143 at 72Hz. (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) (--) SAVAGE(0): Chose mode 114 at 85Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (--) SAVAGE(0): Chose mode 143 at 72Hz. (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at 85Hz. (II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range) (--) SAVAGE(0): Chose mode 153 at 70Hz. (II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 153 at 70Hz. (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at 70Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 153 at 70Hz. (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at 75Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 153 at 70Hz. (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at 85Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 153 at 70Hz. (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) (--) SAVAGE(0): Chose mode 111 at 60Hz. (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) (--) SAVAGE(0): Chose mode 111 at 85Hz. (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz. (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz. (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz. (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose mode 114 at 60Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose mode 114 at 60Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose mode 114 at 72Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose mode 114 at 75Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose mode 114 at 85Hz. (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz. (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz. (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz. (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz. (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz. (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz. (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) (--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz. (II) SAVAGE(0): Not using default mode "832x624" (no mode of this name) (--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz. (II) SAVAGE(0): Not using default mode "416x312" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 60Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 70Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 74Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 576x432 100Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz. (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name) (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz. (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz. (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz. (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz. (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz. (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1440x900" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 720x450 59Hz. (II) SAVAGE(0): Not using default mode "720x450" (no mode of this name) (II) SAVAGE(0): Not using default mode "1600x1024" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz. (II) SAVAGE(0): Not using default mode "800x512" (no mode of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525 59Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525 74Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525 85Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using default mode "1920x1080" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 960x540 59Hz. (II) SAVAGE(0): Not using default mode "960x540" (no mode of this name) (II) SAVAGE(0): Not using default mode "1920x1200" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 960x600 59Hz. (II) SAVAGE(0): Not using default mode "960x600" (no mode of this name) (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz. (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (--) SAVAGE(0): Chose mode 117 at 75Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) (--) SAVAGE(0): Chose mode 117 at 85Hz. (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at 60Hz. (--) SAVAGE(0): Chose mode 117 at 60Hz. (--) SAVAGE(0): Chose mode 114 at 60Hz. (--) SAVAGE(0): Chose mode 114 at 60Hz. (--) SAVAGE(0): Chose mode 111 at 60Hz. (--) SAVAGE(0): Chose mode 143 at 72Hz. (--) SAVAGE(0): Chose mode 143 at 72Hz. (--) SAVAGE(0): Chose mode 133 at 72Hz. (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024) (**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz (II) SAVAGE(0): Modeline "1024x768"x59.9 56.00 1024 1072 1104 1184 768 771 775 790 +hsync -vsync (47.3 kHz) (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) (**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz) (**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz) (==) SAVAGE(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.5.99.902, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0): VESA VBE Version 2.0 (II) SAVAGE(0): VESA VBE Total Mem: 8192 kB (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1 (II) SAVAGE(0): Direct rendering forced off (EE) SAVAGE(0): DRI isn't enabled (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) SAVAGE(0): Using 1280 lines for offscreen memory. (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Image Writes Setting up tile and stipple cache: 32 128x128 slots 12 256x256 slots (==) SAVAGE(0): Backing store disabled (II) SAVAGE(0): DPMS enabled (WW) SAVAGE(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device Video Bus (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event5" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Video Bus: xkb_model: "evdev" (**) Option "xkb_layout" "de" (**) Video Bus: xkb_layout: "de" (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse (**) ImPS/2 Generic Wheel Mouse: always reports core events (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event2" (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00 (**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms (**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "de" (**) AT Translated Set 2 keyboard: xkb_layout: "de" (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) Video Bus: Device reopened after 1 attempts. (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Open ACPI successful (/var/run/acpid.socket) (--) SAVAGE(0): Chose mode 117 at 60Hz. Backtrace: 0: X(xorg_backtrace+0x3b) [0x813158b] 1: X(xf86SigHandler+0x51) [0x80c5451] 2: [0xb7efe400] 3: X [0x80f6a86] 4: X(xf86Wakeup+0x408) [0x80c5bb8] 5: X(WakeupHandler+0x52) [0x8090142] 6: X(WaitForSomething+0x1bb) [0x812ef0b] 7: X(Dispatch+0x7e) [0x808c25e] 8: X(main+0x3c5) [0x80716f5] 9: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7ad4775] 10: X [0x8070ba1] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) ImPS/2 Generic Wheel Mouse: Close (II) UnloadModule: "evdev" (II) Video Bus: Close (II) UnloadModule: "evdev" -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg depends on: ii debconf [debconf-2.0] 1.5.25 Debian configuration management sy ii hal 0.5.11-8 Hardware Abstraction Layer ii libc6 2.9-0exp2 GNU C Library: Shared libraries ii x11-xkb-utils 7.4+2 X11 XKB utilities ii xkb-data 1.5-2 X Keyboard Extension (XKB) configu ii xserver-xorg-core 2:1.5.99.902-1 Xorg X server - core server ii xserver-xorg-input-evdev 1:2.1.1-1 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [x 1:1.3.2-2 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse 1:1.4.0-1 X.Org X server -- mouse input driv ii xserver-xorg-input-synapt 0.99.3-3 Synaptics TouchPad driver for X.Or ii xserver-xorg-video-dummy 1:0.3.1-1 X.Org X server -- dummy display dr ii xserver-xorg-video-savage 1:2.2.1-4 X.Org X server -- Savage display d ii xserver-xorg-video-sisusb 1:0.9.0-4 X.Org X server -- SiS USB display ii xserver-xorg-video-vesa [ 1:2.1.0-1 X.Org X server -- VESA display dri Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 7.3-1 A free implementation of the OpenG ii udev 0.125-7 /dev/ and hotplug management daemo xserver-xorg suggests no packages. -- debconf information: xserver-xorg/config/doublequote_in_string_error: xserver-xorg/config/device/bus_id_error: * xserver-xorg/config/inputdevice/keyboard/options: * xserver-xorg/autodetect_keyboard: false * xserver-xorg/config/device/use_fbdev: false * xserver-xorg/config/inputdevice/keyboard/variant: nodeadkeys xserver-xorg/config/nonnumeric_string_error: * xserver-xorg/config/inputdevice/keyboard/layout: de * xserver-xorg/config/inputdevice/keyboard/model: pc105 * xserver-xorg/config/device/driver: xserver-xorg/config/null_string_error: xserver-xorg/config/device/bus_id: * xserver-xorg/config/inputdevice/keyboard/rules: xorg
--- End Message ---
--- Begin Message ---
- To: Simon Danner <simon@danner-urloffen.de>
- Cc: 516290-done@bugs.debian.org
- Subject: Re: Bug#516290: xserver-xorg: X crashed when switching from VT to X
- From: Cyril Brulebois <kibi@debian.org>
- Date: Fri, 28 Jan 2011 13:05:28 +0100
- Message-id: <20110128120528.GL28694@debian.org>
- In-reply-to: <1296219334.3116.1.camel@arch-simon>
- References: <20090220123217.8388.31661.reportbug@localhost> <20090603014819.GA32766@patate.is-a-geek.org> <[🔎] 20110128113653.GA2848@debian.org> <1296219334.3116.1.camel@arch-simon>
Simon Danner <simon@danner-urloffen.de> (28/01/2011): > Hey, > i can't reproduce it anymore. > simon Thanks for the quick follow-up, closing accordingly. KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---