Your message dated Fri, 28 Jan 2011 13:04:48 +0100 with message-id <20110128120448.GK28694@debian.org> and subject line Re: Bug#513061: xserver-xorg: Half-working kbd and non-working touchpad has caused the Debian Bug report #513061, regarding xserver-xorg: Alt key stops working after VT switch to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 513061: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=513061 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg: Half-working kbd and non-working touchpad
- From: Oleg Kostyuk <cub.uanic@gmail.com>
- Date: Mon, 26 Jan 2009 03:49:18 +0200
- Message-id: <20090126014918.27542.58434.reportbug@humsterbook.cub.org.ua>
Package: xserver-xorg Version: 1:7.4~5 Severity: important Hello, After today's upgrade to lastest Xorg, I have two problems: 1) On Xorg login screen (without loggin into system), if I switch to any tty and then back to Xorg, then touchpad is stop working at all, and Alt key is stop working also (so I can't use Alt+E to restart Xorg and Ctrl+Alt+BkSp to kill Xorg). Restarting Xorg (by switching to tty and issue /etc/init.d/kdm restart) fixes this problem. 2) After resume from suspend-to-disk touchpad stop working. Restarting Xorg also fixes this problem. Both problems 100%% reproduceable. I use Debian Lenny with Xorg from experimental on Dell Studio 1535. Now I use following versions: xserver-common 2:1.5.99.901-2 xserver-xorg 1:7.4~5 xserver-xorg-core 2:1.5.99.901-1 xserver-xorg-input-evdev 1:2.1.1-1 xserver-xorg-input-kbd 1:1.3.2-2 xserver-xorg-input-mouse 1:1.4.0-1 Before upgrade versions was: xserver-common 2:1.5.3-1 xserver-xorg 1:7.4~4 xserver-xorg-input-all 1:7.4~4 (not sure about other packages) -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Янв 26 01:04 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1868112 Янв 21 22:04 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 2598 Янв 26 02:08 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us,ru" Option "XkbOptions" "grp:alt_shift_toggle" EndSection Section "DRI" Mode 0666 EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" # Driver "vesa" Driver "intel" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" SubSection "Display" Viewport 0 0 Depth 32 EndSubSection EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 24089 Янв 26 03:17 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.901 (1.6.0 RC 1) Release Date: (unreleased) X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.28 x86_64 Debian Current Operating System: Linux humsterbook 2.6.26-1-amd64 #1 SMP Sat Jan 10 17:57:00 UTC 2009 x86_64 Build Date: 21 January 2009 08:00:45PM xorg-server 2:1.5.99.901-1 (jcristau@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 26 03:17:51 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xd60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8 (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf6f00000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.6.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF6E00000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): EDID vendor "AUO", prod id 33140 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 617728 total, 1 used (II) intel(0): I830CheckAvailableMemory: 2470908 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf6e00000 (II) intel(0): [drm] ring buffer = 0xe0000000 (II) intel(0): [drm] mapped front buffer at 0xe0200000, handle = 0xe0200000 (II) intel(0): [drm] mapped back buffer at 0xe1b00000, handle = 0xe1b00000 (II) intel(0): [drm] mapped depth buffer at 0xe2140000, handle = 0xe2140000 (II) intel(0): [drm] mapped classic textures at 0xe2780000, handle = 0xe2780000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00840000 (pgoffset 2112) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01b00000 (pgoffset 6912) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02140000 (pgoffset 8512) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02780000 (pgoffset 10112) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB) (II) intel(0): 0x00132000-0x00140fff: exa G965 state buffer (60 kB) (II) intel(0): 0x00141000-0x00141fff: overlay registers (4 kB) (II) intel(0): 0x00142000-0x00142fff: power context (4 kB) (II) intel(0): 0x00200000-0x0083ffff: front buffer (6400 kB) X tiled (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x00840000-0x01afffff: exa offscreen (19200 kB) (II) intel(0): 0x01b00000-0x0213ffff: back buffer (6400 kB) X tiled (II) intel(0): 0x02140000-0x0277ffff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x02780000-0x0477ffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): ESR is 0x00000001 (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 12, (OK) drmOpenByBusid: drmOpenMinor returns 12 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (II) config/hal: Adding input device Video Bus (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event9" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Video Bus: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event8" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Video Bus: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint (**) AlpsPS/2 ALPS GlidePoint: always reports core events (**) AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event7" (II) AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons (II) AlpsPS/2 ALPS GlidePoint: Found x and y relative axes (II) AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes (II) AlpsPS/2 ALPS GlidePoint: Found absolute touchpad (II) AlpsPS/2 ALPS GlidePoint: Configuring as mouse (**) AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5 (**) AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: MOUSE) (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms (**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0 (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event6" (II) PS/2 Mouse: Found 3 mouse buttons (II) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Configuring as mouse (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device HID 413c:8158 (**) HID 413c:8158: always reports core events (**) HID 413c:8158: Device: "/dev/input/event14" (II) HID 413c:8158: Found 3 mouse buttons (II) HID 413c:8158: Found x and y relative axes (II) HID 413c:8158: Configuring as mouse (**) HID 413c:8158: YAxisMapping: buttons 4 and 5 (**) HID 413c:8158: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "HID 413c:8158" (type: MOUSE) (**) HID 413c:8158: (accel) keeping acceleration scheme 1 (**) HID 413c:8158: (accel) filter chain progression: 2.00 (**) HID 413c:8158: (accel) filter stage 0: 20.00 ms (**) HID 413c:8158: (accel) set acceleration profile 0 (II) config/hal: Adding input device HID 413c:8157 (**) HID 413c:8157: always reports core events (**) HID 413c:8157: Device: "/dev/input/event13" (II) HID 413c:8157: Found keys (II) HID 413c:8157: Configuring as keyboard (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) HID 413c:8157: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) HID 413c:8157: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) HID 413c:8157: xkb_layout: "us" (II) config/hal: Adding input device Logitech USB Receiver (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event12" (II) Logitech USB Receiver: Found 1 mouse buttons (II) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as keyboard (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Logitech USB Receiver: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Logitech USB Receiver: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Logitech USB Receiver: xkb_layout: "us" (II) config/hal: Adding input device Logitech USB Receiver (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event11" (II) Logitech USB Receiver: Found 16 mouse buttons (II) Logitech USB Receiver: Found x and y relative axes (II) Logitech USB Receiver: Configuring as mouse (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE) (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 (**) Logitech USB Receiver: (accel) filter chain progression: 2.00 (**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms (**) Logitech USB Receiver: (accel) set acceleration profile 0 (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event10" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) Video Bus: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (700, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=ru_UA.UTF-8, LC_CTYPE=ru_UA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii hal 0.5.11-8 Hardware Abstraction Layer ii libc6 2.7-18 GNU C Library: Shared libraries ii x11-xkb-utils 7.4+1 X11 XKB utilities ii xkb-data 1.4-1 X Keyboard Extension (XKB) configu ii xserver-xorg-core 2:1.5.99.901-1 Xorg X server - core server ii xserver-xorg-input-evdev 1:2.1.1-1 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [ 1:1.3.2-2 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse 1:1.4.0-1 X.Org X server -- mouse input driv ii xserver-xorg-video-intel 2:2.6.1-1local1 X.Org X server -- Intel i8xx, i9xx Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 7.3~rc3-1 A free implementation of the OpenG ii udev 0.125-7 /dev/ and hotplug management daemo xserver-xorg suggests no packages. -- debconf information: xserver-xorg/config/doublequote_in_string_error: xserver-xorg/config/device/bus_id_error: xserver-xorg/config/inputdevice/keyboard/options: grp:alt_shift_toggle xserver-xorg/autodetect_keyboard: false xserver-xorg/config/device/use_fbdev: false xserver-xorg/config/inputdevice/keyboard/variant: xserver-xorg/config/nonnumeric_string_error: xserver-xorg/config/inputdevice/keyboard/layout: us,ru xserver-xorg/config/inputdevice/keyboard/model: pc105 xserver-xorg/config/device/driver: xserver-xorg/config/null_string_error: xserver-xorg/config/device/bus_id: xserver-xorg/config/inputdevice/keyboard/rules: xorg
--- End Message ---
--- Begin Message ---
- To: Oleg Kostyuk <cub.uanic@gmail.com>
- Cc: 513061-done@bugs.debian.org
- Subject: Re: Bug#513061: xserver-xorg: Half-working kbd and non-working touchpad
- From: Cyril Brulebois <kibi@debian.org>
- Date: Fri, 28 Jan 2011 13:04:48 +0100
- Message-id: <20110128120448.GK28694@debian.org>
- In-reply-to: <[🔎] AANLkTikz6ZzvArWizyQbYNQ1Tv_o9=uMB6qG6N-wV=pc@mail.gmail.com>
- References: <60ef632f0901251840qd5b4836m39985ad52134739e@mail.gmail.com> <[🔎] 20110128113248.GA2370@debian.org> <[🔎] AANLkTikz6ZzvArWizyQbYNQ1Tv_o9=uMB6qG6N-wV=pc@mail.gmail.com>
Hi, Oleg Kostyuk <cub.uanic@gmail.com> (28/01/2011): > I'm not sure, didn't checked it for a long time. Now I'm away from > notebook and can't check to be sure. Let's assume all is ok for now, > and I'll reopen bug if problem will repeat. thanks for the very quick follow-up. Please open a new bug if you're having any issues, that'll include plenty of (up-to-date) info we need to handle your bug. KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---