Bug#607938: xserver-xorg: X randomly freezes on Samsung Q20, the system is still alive
On 19.01.2011 12:35, Julien Cristau wrote:
On Wed, Jan 19, 2011 at 11:59:53 +0200, Andrew Osnach wrote:
After upgrade акщь 18/01/2011 (I didn't upgrade the system since the
end of december) the situation has deteriorated markedly - X crashes
permanently, but now I can get to the console. The only error
message in /var/log/Xorg.0.log is:
Fatal server error:
Failed to submit batchbuffer: Input/output error
Also I've got message:
X: ../../src/i830_batchbuffer.h:79: intel_batch_emit_dword: Assertion
`pI830->batch_ptr != ((void *)0)' failed.
What else can I do to help in resolving the problem?
Can you attach the full X log and dmesg?
Thanks,
Julien
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000176e0000 (usable)
[ 0.000000] BIOS-e820: 00000000176e0000 - 00000000176e9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000176e9000 - 0000000017700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017700000 - 0000000018000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x176e0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 017F00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000176e0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0017400000 page 2M
[ 0.000000] 0017400000 - 00176e0000 page 4k
[ 0.000000] kernel direct mapping tables up to 176e0000 @ 10000-16000
[ 0.000000] RAMDISK: 11034000 - 11967fc9
[ 0.000000] ACPI: RSDP 000f61d0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 176e3832 00034 (v01 PTLTD Montara 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 176e8ed2 00074 (v01 SEC CETUS 06040000 PTL 00000050)
[ 0.000000] ACPI: DSDT 176e3ec2 05010 (v01 INTEL MONTARAG 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 176f9fc0 00040
[ 0.000000] ACPI: BOOT 176e8fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 176e3c7b 0023F (v01 INTEL CPU0CST 00000001 INTL 20020725)
[ 0.000000] ACPI: SSDT 176e3866 0028A (v01 INTEL EISTRef 00002000 INTL 02012044)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 374MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 176e0000
[ 0.000000] low ram: 0 - 176e0000
[ 0.000000] node 0 low ram: 00000000 - 176e0000
[ 0.000000] node 0 bootmap 00012000 - 00014edc
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00176e0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4]
[ 0.000000] #4 [0011034000 - 0011967fc9] RAMDISK ==> [0011034000 - 0011967fc9]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014ca000 - 00014d0140] BRK ==> [00014ca000 - 00014d0140]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000015000] BOOTMAP ==> [0000012000 - 0000015000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000176e0
[ 0.000000] HighMem 0x000176e0 -> 0x000176e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000176e0
[ 0.000000] On node 0 totalpages: 95855
[ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 718 pages used for memmap
[ 0.000000] Normal zone: 91154 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 18000000 (gap: 18000000:e6c10000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34296 r0 d23048 u4194304
[ 0.000000] pcpu-alloc: s34296 r0 d23048 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 95105
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=cd377aad-9f77-4714-af7e-17751d7eb44c ro single
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 365092k/383872k available (2501k kernel code, 17860k reserved, 1323k data, 376k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xd7ee0000 - 0xff3fe000 ( 629 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd76e0000 ( 374 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB)
[ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1196.174 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2392.34 BogoMIPS (lpj=4784696)
[ 0.004134] Security Framework initialized
[ 0.004194] SELinux: Disabled at boot.
[ 0.004253] Mount-cache hash table entries: 512
[ 0.004473] Initializing cgroup subsys ns
[ 0.004529] Initializing cgroup subsys cpuacct
[ 0.004586] Initializing cgroup subsys devices
[ 0.004641] Initializing cgroup subsys freezer
[ 0.004696] Initializing cgroup subsys net_cls
[ 0.004783] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004868] CPU: L2 cache: 1024K
[ 0.004923] mce: CPU supports 5 MCE banks
[ 0.004993] Performance Events:
[ 0.005031] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.005134] no hardware sampling interrupt available.
[ 0.005188] p6 PMU driver.
[ 0.005253] ... version: 0
[ 0.005306] ... bit width: 32
[ 0.005359] ... generic registers: 2
[ 0.005413] ... value mask: 00000000ffffffff
[ 0.005468] ... max period: 000000007fffffff
[ 0.005524] ... fixed-purpose events: 0
[ 0.005577] ... event mask: 0000000000000003
[ 0.005635] Checking 'hlt' instruction... OK.
[ 0.020582] SMP alternatives: switching to UP code
[ 0.026237] Freeing SMP alternatives: 13k freed
[ 0.026297] ACPI: Core revision 20090903
[ 0.034841] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.036084] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.036141] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036196] SMP motherboard not detected.
[ 0.036249] Local APIC not detected. Using dummy APIC emulation.
[ 0.036305] SMP disabled
[ 0.040034] Brought up 1 CPUs
[ 0.040086] Total of 1 processors activated (2392.34 BogoMIPS).
[ 0.040985] CPU0 attaching NULL sched-domain.
[ 0.041163] devtmpfs: initialized
[ 0.041937] regulator: core version 0.5
[ 0.042067] NET: Registered protocol family 16
[ 0.042257] ACPI: bus type pci registered
[ 0.043758] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
[ 0.043816] PCI: Using configuration type 1 for base access
[ 0.044482] bio: create slab <bio-0> at 0
[ 0.045368] ACPI: EC: Look up EC in DSDT
[ 0.051966] ACPI: Interpreter enabled
[ 0.052009] ACPI: (supports S0 S3 S4 S5)
[ 0.052205] ACPI: Using PIC for interrupt routing
[ 0.052747] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.061546] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.061679] ACPI: Power Resource [PFAN] (on)
[ 0.062595] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.063584] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.063801] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.063809] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff]
[ 0.063816] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.063840] pci 0000:00:02.0: supports D1
[ 0.063862] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.063869] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff]
[ 0.063895] pci 0000:00:02.1: supports D1
[ 0.063968] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.064033] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.064087] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.064141] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff]
[ 0.064193] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.064254] pci 0000:00:1d.7: PME# disabled
[ 0.064390] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.064466] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.064554] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.064563] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.064572] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.064580] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.064589] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.064598] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.064650] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
[ 0.064695] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.064704] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.064712] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff]
[ 0.064721] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff]
[ 0.064751] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.064811] pci 0000:00:1f.5: PME# disabled
[ 0.064894] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.064903] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.064940] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.064999] pci 0000:00:1f.6: PME# disabled
[ 0.065093] pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.065111] pci 0000:02:03.0: supports D1 D2
[ 0.065115] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065176] pci 0000:02:03.0: PME# disabled
[ 0.065257] pci 0000:02:03.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.065275] pci 0000:02:03.1: supports D1 D2
[ 0.065279] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065340] pci 0000:02:03.1: PME# disabled
[ 0.065422] pci 0000:02:03.2: reg 10 32bit mmio: [0xe0202000-0xe02027ff]
[ 0.065463] pci 0000:02:03.2: PME# supported from D0 D3hot D3cold
[ 0.065522] pci 0000:02:03.2: PME# disabled
[ 0.065615] pci 0000:02:04.0: reg 10 32bit mmio: [0xe0200000-0xe0200fff]
[ 0.065694] pci 0000:02:08.0: reg 10 32bit mmio: [0xe0201000-0xe0201fff]
[ 0.065703] pci 0000:02:08.0: reg 14 io port: [0x3000-0x303f]
[ 0.065739] pci 0000:02:08.0: supports D1 D2
[ 0.065743] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065804] pci 0000:02:08.0: PME# disabled
[ 0.065889] pci 0000:00:1e.0: transparent bridge
[ 0.065946] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
[ 0.065952] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff]
[ 0.065994] pci_bus 0000:00: on NUMA node 0
[ 0.066001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.066247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.075318] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[ 0.075599] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.075876] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ 0.076141] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 0.077345] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[ 0.077624] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 0.077968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.078588] ACPI: PCI Interrupt Link [LNKH] (IRQs *11)
[ 0.078858] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.078944] vgaarb: loaded
[ 0.079082] PCI: Using ACPI for IRQ routing
[ 0.079386] Switching to clocksource tsc
[ 0.079977] pnp: PnP ACPI init
[ 0.079977] ACPI: bus type pnp registered
[ 0.084834] pnp: PnP ACPI: found 12 devices
[ 0.084889] ACPI: ACPI bus type pnp unregistered
[ 0.084946] PnPBIOS: Disabled by ACPI PNP
[ 0.085014] system 00:04: ioport range 0x600-0x60f has been reserved
[ 0.085074] system 00:04: ioport range 0x700-0x70f has been reserved
[ 0.085134] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.085194] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.085254] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 0.085316] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 0.120184] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.120244] pci 0000:02:03.0: IO window: 0x003400-0x0034ff
[ 0.120303] pci 0000:02:03.0: IO window: 0x003800-0x0038ff
[ 0.120361] pci 0000:02:03.0: PREFETCH window: 0x18000000-0x1bffffff
[ 0.120422] pci 0000:02:03.0: MEM window: 0x24000000-0x27ffffff
[ 0.120482] pci 0000:02:03.1: CardBus bridge, secondary bus 0000:07
[ 0.120550] pci 0000:02:03.1: IO window: 0x003c00-0x003cff
[ 0.120608] pci 0000:02:03.1: IO window: 0x001400-0x0014ff
[ 0.120667] pci 0000:02:03.1: PREFETCH window: 0x1c000000-0x1fffffff
[ 0.120728] pci 0000:02:03.1: MEM window: 0x28000000-0x2bffffff
[ 0.120787] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.120846] pci 0000:00:1e.0: IO window: 0x3000-0x3fff
[ 0.120905] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff
[ 0.120965] pci 0000:00:1e.0: PREFETCH window: 0x18000000-0x1fffffff
[ 0.121038] pci 0000:00:1e.0: setting latency timer to 64
[ 0.121272] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.121329] PCI: setting IRQ 10 as level-triggered
[ 0.121337] pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.121421] pci 0000:02:03.1: enabling device (0000 -> 0003)
[ 0.121679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 0.121735] PCI: setting IRQ 5 as level-triggered
[ 0.121742] pci 0000:02:03.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.121823] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.121828] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.121834] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.121839] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff]
[ 0.121844] pci_bus 0000:02: resource 2 pref mem [0x18000000-0x1fffffff]
[ 0.121849] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.121854] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.121859] pci_bus 0000:03: resource 0 io: [0x3400-0x34ff]
[ 0.121863] pci_bus 0000:03: resource 1 io: [0x3800-0x38ff]
[ 0.121868] pci_bus 0000:03: resource 2 pref mem [0x18000000-0x1bffffff]
[ 0.121874] pci_bus 0000:03: resource 3 mem: [0x24000000-0x27ffffff]
[ 0.121879] pci_bus 0000:07: resource 0 io: [0x3c00-0x3cff]
[ 0.121883] pci_bus 0000:07: resource 1 io: [0x1400-0x14ff]
[ 0.121888] pci_bus 0000:07: resource 2 pref mem [0x1c000000-0x1fffffff]
[ 0.121893] pci_bus 0000:07: resource 3 mem: [0x28000000-0x2bffffff]
[ 0.121949] NET: Registered protocol family 2
[ 0.122150] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.122695] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.122907] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.123100] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.123159] TCP reno registered
[ 0.123313] NET: Registered protocol family 1
[ 0.123396] pci 0000:00:02.0: Boot video device
[ 0.123488] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.123632] Unpacking initramfs...
[ 0.598757] Freeing initrd memory: 9423k freed
[ 0.608934] Simple Boot Flag at 0x36 set to 0x1
[ 0.609383] audit: initializing netlink socket (disabled)
[ 0.609464] type=2000 audit(1295431805.608:1): initialized
[ 0.616662] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.619455] VFS: Disk quotas dquot_6.5.2
[ 0.619609] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.619800] msgmni has been set to 732
[ 0.620177] alg: No test for stdrng (krng)
[ 0.620325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.620400] io scheduler noop registered
[ 0.620453] io scheduler anticipatory registered
[ 0.620524] io scheduler deadline registered
[ 0.620651] io scheduler cfq registered (default)
[ 0.621009] isapnp: Scanning for PnP cards...
[ 0.974696] isapnp: No Plug & Play device found
[ 0.977013] Linux agpgart interface v0.103
[ 0.977175] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 0.977922] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 0.979770] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.979944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.980109] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.980277] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.980806] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.981017] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 0.981098] serial 0000:00:1f.6: PCI INT B disabled
[ 0.981275] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.983950] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.985337] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.985401] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.985498] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.985591] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.985678] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.985868] mice: PS/2 mouse device common for all mice
[ 0.986055] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.986130] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.986204] cpuidle: using governor ladder
[ 0.986257] cpuidle: using governor menu
[ 0.986313] No iBFT detected.
[ 0.987051] TCP cubic registered
[ 0.987373] NET: Registered protocol family 10
[ 0.988241] lo: Disabled Privacy Extensions
[ 0.988907] Mobile IPv6
[ 0.988958] NET: Registered protocol family 17
[ 0.989032] Using IPI No-Shortcut mode
[ 0.989193] PM: Resume from disk failed.
[ 0.989208] registered taskstats version 1
[ 0.989577] rtc_cmos 00:01: setting system clock to 2011-01-19 10:10:06 UTC (1295431806)
[ 0.989707] Initalizing network drop monitor service
[ 0.989795] Freeing unused kernel memory: 376k freed
[ 0.990132] Write protecting the kernel text: 2504k
[ 0.990218] Write protecting the kernel read-only data: 920k
[ 1.008346] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.124217] udev[49]: starting version 164
[ 1.459238] SCSI subsystem initialized
[ 1.491970] usbcore: registered new interface driver usbfs
[ 1.492270] usbcore: registered new interface driver hub
[ 1.492535] usbcore: registered new device driver usb
[ 1.511906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.512323] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 1.512381] PCI: setting IRQ 11 as level-triggered
[ 1.512389] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 1.512484] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.512490] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.512582] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.516573] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.575797] Floppy drive(s): fd0 is 1.44M
[ 1.575936] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
[ 1.587558] libata version 3.00 loaded.
[ 1.592272] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.592388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.592449] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.592523] usb usb1: Product: EHCI Host Controller
[ 1.592579] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.592637] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.592837] usb usb1: configuration #1 chosen from 1 choice
[ 1.592949] hub 1-0:1.0: USB hub found
[ 1.593014] hub 1-0:1.0: 6 ports detected
[ 1.593548] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.593607] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.593768] e100 0000:02:08.0: power state changed by ACPI to D0
[ 1.593857] e100 0000:02:08.0: power state changed by ACPI to D0
[ 1.594177] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 1.594237] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 1.617104] e100 0000:02:08.0: PME# disabled
[ 1.617635] FDC 0 is a National Semiconductor PC87306
[ 1.646308] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.646382] ACPI: Thermal Zone [THRM] (50 C)
[ 1.646748] ata_piix 0000:00:1f.1: version 2.13
[ 1.646766] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.647069] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 1.647130] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.647260] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.647359] scsi0 : ata_piix
[ 1.647655] scsi1 : ata_piix
[ 1.649217] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.649279] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.650592] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.650723] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 1.650807] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.650812] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.650886] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.650987] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
[ 1.651111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.651171] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.651246] usb usb2: Product: UHCI Host Controller
[ 1.651301] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.651358] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.651630] usb usb2: configuration #1 chosen from 1 choice
[ 1.651794] hub 2-0:1.0: USB hub found
[ 1.651857] hub 2-0:1.0: 2 ports detected
[ 1.652269] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.652329] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.652409] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.652415] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.652480] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.652577] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 1.652687] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.652746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.653743] usb usb3: Product: UHCI Host Controller
[ 1.653798] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.653855] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.656107] ata2: port disabled. ignoring.
[ 1.656516] usb usb3: configuration #1 chosen from 1 choice
[ 1.656706] hub 3-0:1.0: USB hub found
[ 1.656770] hub 3-0:1.0: 2 ports detected
[ 1.656908] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.656992] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.656998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.657065] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.657165] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
[ 1.657276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.657336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.657410] usb usb4: Product: UHCI Host Controller
[ 1.657465] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.657522] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.657758] usb usb4: configuration #1 chosen from 1 choice
[ 1.657916] hub 4-0:1.0: USB hub found
[ 1.657978] hub 4-0:1.0: 2 ports detected
[ 1.659490] e100: eth0: e100_probe: addr 0xe0201000, irq 11, MAC addr 00:00:f0:84:63:89
[ 1.659600] firewire_ohci 0000:02:03.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.736023] firewire_ohci: Added fw-ohci device 0000:02:03.2, OHCI version 1.0
[ 1.816512] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD0A, max UDMA/100
[ 1.816574] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.832402] ata1.00: configured for UDMA/100
[ 1.832626] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 1.859874] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.860066] sd 0:0:0:0: [sda] Write Protect is off
[ 1.860123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.860162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.860465] sda: sda1 sda2 < sda5 sda6 >
[ 1.908945] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096039] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 2.236153] firewire_core: created device fw0: GUID 0000f041001055d8, S400
[ 2.271972] usb 2-2: New USB device found, idVendor=413c, idProduct=3012
[ 2.272050] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.272111] usb 2-2: Product: Dell USB Optical Mouse
[ 2.272167] usb 2-2: Manufacturer: Dell
[ 2.272347] usb 2-2: configuration #1 chosen from 1 choice
[ 2.303595] usbcore: registered new interface driver hiddev
[ 2.317734] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 2.318423] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.318658] usbcore: registered new interface driver usbhid
[ 2.319199] usbhid: v2.6:USB HID core driver
[ 2.459411] PM: Starting manual resume from disk
[ 2.459486] PM: Resume from partition 8:5
[ 2.459489] PM: Checking hibernation image.
[ 2.470836] PM: Error -22 checking image file
[ 2.470839] PM: Resume from disk failed.
[ 2.533646] kjournald starting. Commit interval 5 seconds
[ 2.533719] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.011287] udev[330]: starting version 164
[ 7.508071] Marking TSC unstable due to TSC halts in idle
[ 7.509337] processor LNXCPU:00: registered as cooling_device0
[ 7.516752] Switching to clocksource acpi_pm
[ 7.517212] ACPI: AC Adapter [ADP1] (on-line)
[ 7.518099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.518189] ACPI: Power Button [PWRB]
[ 7.518762] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.529250] ACPI: Lid Switch [LID0]
[ 7.530024] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 7.530110] ACPI: Sleep Button [SLPB]
[ 7.530358] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.530436] ACPI: Power Button [PWRF]
[ 7.546822] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.547184] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.606983] ACPI: Battery Slot [BAT1] (battery present)
[ 7.610126] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 7.615658] acpi device:04: registered as cooling_device1
[ 7.616342] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 7.616432] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 7.765254] intel_rng: FWH not detected
[ 7.920260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.243527] parport_pc 00:07: reported by Plug and Play ACPI
[ 8.243687] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 8.269733] NET: Registered protocol family 23
[ 8.283584] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 8.426982] lib80211: common routines for IEEE802.11 drivers
[ 8.427046] lib80211_crypt: registered algorithm 'NULL'
[ 8.677350] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 8.677416] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 8.687879] nsc-ircc, chip->init
[ 8.687943] nsc-ircc, Found chip at base=0x02e
[ 8.688044] nsc-ircc, driver loaded (Dag Brattli)
[ 8.688304] nsc_ircc_open(), can't get iobase of 0x2f8
[ 8.688386] nsc-ircc, Found chip at base=0x02e
[ 8.688462] nsc-ircc, driver loaded (Dag Brattli)
[ 8.688518] nsc_ircc_open(), can't get iobase of 0x2f8
[ 8.689077] nsc-ircc 00:09: disabled
[ 8.885694] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0/0x0
[ 8.921540] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 9.380003] [drm] Initialized drm 1.1.0 20060810
[ 9.412440] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 9.412507] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 9.414891] ipw2100 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 9.415671] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 9.415757] ipw2100 0000:02:04.0: firmware: requesting ipw2100-1.3.fw
[ 10.256914] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 10.257001] i915 0000:00:02.0: setting latency timer to 64
[ 10.262515] [drm] set up 7M of stolen space
[ 10.292200] yenta_cardbus 0000:02:03.0: CardBus bridge found [144d:c00a]
[ 10.317719] udev[341]: renamed network interface eth1 to eth2
[ 10.420758] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0018, PCI irq 10
[ 10.420825] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 10.420886] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 10.420975] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 10.421053] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[ 10.421563] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 10.421643] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x18000000 - 0x1fffffff
[ 10.424274] yenta_cardbus 0000:02:03.1: CardBus bridge found [144d:c00a]
[ 10.472479] [drm] initialized overlay support
[ 10.724188] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0008, PCI irq 5
[ 10.724249] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[ 10.724308] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 10.724390] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 10.724467] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: clean.
[ 10.724984] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 10.725063] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x18000000 - 0x1fffffff
[ 11.453071] Console: switching to colour frame buffer device 128x48
[ 11.462419] fb0: inteldrmfb frame buffer device
[ 11.462502] registered panic notifier
[ 11.462655] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.462870] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 11.463066] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 11.863645] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 11.865464] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 11.866344] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 11.867088] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.868225] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 11.870001] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 11.870882] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.871624] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.872789] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.873964] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 12.288035] intel8x0_measure_ac97_clock: measured 55376 usecs (2668 samples)
[ 12.288171] intel8x0: clocking to 48000
[ 12.290084] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 12.290269] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[ 13.713422] Adding 1108444k swap on /dev/sda5. Priority:-1 extents:1 across:1108444k
[ 14.304202] EXT3 FS on sda1, internal journal
[ 14.468969] loop: module loaded
[ 15.686800] kjournald starting. Commit interval 5 seconds
[ 15.689934] EXT3 FS on sda6, internal journal
[ 15.692918] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.756996] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.760780] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 17.764558] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.462410] fuse init (API version 7.13)
[ 28.296028] eth0: no IPv6 routers present
[ 41.556624] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 43.098042] ttyS1: LSR safety check engaged!
[ 45.056067] apm: BIOS not found.
[ 46.068234] Bluetooth: Core ver 2.15
[ 46.071908] NET: Registered protocol family 31
[ 46.075221] Bluetooth: HCI device and connection manager initialized
[ 46.078495] Bluetooth: HCI socket layer initialized
[ 46.201342] Bluetooth: L2CAP ver 2.14
[ 46.204645] Bluetooth: L2CAP socket layer initialized
[ 46.489336] Bluetooth: RFCOMM TTY layer initialized
[ 46.492773] Bluetooth: RFCOMM socket layer initialized
[ 46.496052] Bluetooth: RFCOMM ver 1.11
[ 46.868895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 46.872097] Bluetooth: BNEP filters: protocol multicast
[ 47.024208] Bridge firewalling registered
[ 47.383299] Bluetooth: SCO (Voice Link) ver 0.6
[ 47.386346] Bluetooth: SCO socket layer initialized
[ 49.235334] lp0: using parport0 (interrupt-driven).
[ 49.654737] ppdev: user-space parallel port driver
[ 60.784970] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 1683.818871] lo: Disabled Privacy Extensions
[ 1715.093096] lo: Disabled Privacy Extensions
[ 2139.020525] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 2184.592853] lo: Disabled Privacy Extensions
[ 2202.721521] lo: Disabled Privacy Extensions
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux and-wire 2.6.32-5-686 #1 SMP Wed Jan 12 04:01:41 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=cd377aad-9f77-4714-af7e-17751d7eb44c ro single
Build Date: 02 December 2010 01:08:37AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 19 13:03:45 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ec060
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:2:0) 8086:3582:144d:c00a Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xe0000000/524288, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:3582:144d:c00a Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xe0080000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 (48.4 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
Fatal server error:
Failed to submit batchbuffer: Input/output error
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) AIGLX: Suspending AIGLX clients for VT switch
Reply to: