Bug#589807: xserver-xorg-video-radeon: dri disabled ([dri] RADEONDRIGetVersion failed because of a version mismatch)
On 07/21/2010 11:45 AM, Julien Cristau wrote:
On Wed, Jul 21, 2010 at 10:41:56 +0200, Aleix Conchillo Flaqué wrote:
The solution that works for me is to force loading the radeon module in
/etc/modules.
This should not be necessary, udev should autoload radeon on boot. Can
you attach dmesg after removing radeon from /etc/modules?
From the dmesg timings, I can see that the drm initialization starts at
[ 9.797560] when radeon module loaded in /etc/modules (see drm
messages in original bug). From the dmesg output below, I see that drm
initialization starts at [ 22.688394]. So, it seems to me that udev is
not loading the driver properly. I can easily detect this, because when
radeon module is loaded properly before X, the text mode resolution changes.
Also, if I boot with (recovery mode), the radeon module is not loaded
(only if added in /etc/module).
Hope it helps,
Aleix
dmesg output after removing radeon from /etc/modules:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-15)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue
Jun 1 04:59:47 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffae000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbffa0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377d6000 - 37fef33f
[ 0.000000] Allocated new RAMDISK: 00100000 - 0091933f
[ 0.000000] Move RAMDISK from 00000000377d6000 - 0000000037fef33e to
00100000 - 0091933e
[ 0.000000] ACPI: RSDP 000f8110 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT bffa0100 0007C (v01 _ASUS_ Notebook 01000814
MSFT 00000097)
[ 0.000000] ACPI: FACP bffa0290 000F4 (v03 A_M_I_ OEMFACP 01000814
MSFT 00000097)
[ 0.000000] ACPI: DSDT bffa0680 0BA5D (v01 X55SR X55SR001 00000001
INTL 20051117)
[ 0.000000] ACPI: FACS bffae000 00040
[ 0.000000] ACPI: APIC bffa0390 0005C (v01 A_M_I_ OEMAPIC 01000814
MSFT 00000097)
[ 0.000000] ACPI: MCFG bffa0430 0003C (v01 A_M_I_ OEMMCFG 01000814
MSFT 00000097)
[ 0.000000] ACPI: SLIC bffa0470 00176 (v01 _ASUS_ Notebook 01000814
MSFT 00000097)
[ 0.000000] ACPI: DBGP bffa03f0 00034 (v01 A_M_I_ OEMDBGP 01000814
MSFT 00000097)
[ 0.000000] ACPI: BOOT bffa05f0 00028 (v01 A_M_I_ OEMBOOT 01000814
MSFT 00000097)
[ 0.000000] ACPI: ECDT bffa0620 00054 (v01 A_M_I_ OEMECDT 01000814
MSFT 00000097)
[ 0.000000] ACPI: OEMB bffae040 00060 (v01 A_M_I_ AMI_OEM 01000814
MSFT 00000097)
[ 0.000000] ACPI: HPET bffac0e0 00038 (v01 A_M_I_ OEMHPET 01000814
MSFT 00000097)
[ 0.000000] ACPI: ATKG bffae2a0 08024 (v01 A_M_I_ OEMATKG 05000702
MSFT 00000097)
[ 0.000000] ACPI: SSDT bffb6e20 004E6 (v01 PmRef CpuPm 00003000
INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2187MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c3154] TEXT DATA BSS ==>
[0001000000 - 00014c3154]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [00014c4000 - 00014ca204] BRK ==>
[00014c4000 - 00014ca204]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 000091933f] NEW RAMDISK ==>
[0000100000 - 000091933f]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==>
[0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bffa0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffa0
[ 0.000000] On node 0 totalpages: 786223
[ 0.000000] free_area_init_node: node 0, pgdat c13ae680, node_mem_map
c14cc200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4376 pages used for memmap
[ 0.000000] HighMem zone: 555658 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34136 r0 d23208
u2097152
[ 0.000000] pcpu-alloc: s34136 r0 d23208 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 780079
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=5325074f-80e6-4f16-a615-e7a7e9dd68a3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:000bffa0)
[ 0.000000] Memory: 3105036k/3145344k available (2490k kernel code,
38780k reserved, 1318k data, 372k init, 2240136k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b9000 - 0xc1416000 ( 372 kB)
[ 0.000000] .data : 0xc126e965 - 0xc13b81e0 (1318 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126e965 (2490 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.405 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4788.81 BogoMIPS (lpj=9577620)
[ 0.004136] Security Framework initialized
[ 0.004195] SELinux: Disabled at boot.
[ 0.004256] Mount-cache hash table entries: 512
[ 0.004463] Initializing cgroup subsys ns
[ 0.004521] Initializing cgroup subsys cpuacct
[ 0.004581] Initializing cgroup subsys devices
[ 0.008006] Initializing cgroup subsys freezer
[ 0.008062] Initializing cgroup subsys net_cls
[ 0.008143] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008242] CPU: L2 cache: 3072K
[ 0.008298] CPU: Physical Processor ID: 0
[ 0.008353] CPU: Processor Core ID: 0
[ 0.008411] mce: CPU supports 6 MCE banks
[ 0.008474] CPU0: Thermal monitoring handled by SMI
[ 0.008479] using mwait in idle threads.
[ 0.008541] Performance Events: Core2 events, Intel PMU driver.
[ 0.008688] ... version: 2
[ 0.008743] ... bit width: 40
[ 0.008799] ... generic registers: 2
[ 0.008854] ... value mask: 000000ffffffffff
[ 0.008911] ... max period: 000000007fffffff
[ 0.008968] ... fixed-purpose events: 3
[ 0.009024] ... event mask: 0000000700000003
[ 0.009082] Checking 'hlt' instruction... OK.
[ 0.025932] ACPI: Core revision 20090903
[ 0.048063] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091191] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz
stepping 06
[ 0.092001] APIC calibration not consistent with PM-Timer: 615ms
instead of 100ms
[ 0.092001] APIC delta adjusted to PM-Timer: 1246873 (7680654)
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.176060] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz
stepping 06
[ 0.176475] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180054] Brought up 2 CPUs
[ 0.180111] Total of 2 processors activated (9576.77 BogoMIPS).
[ 0.181100] CPU0 attaching sched-domain:
[ 0.181105] domain 0: span 0-1 level MC
[ 0.181109] groups: 0 1
[ 0.181118] CPU1 attaching sched-domain:
[ 0.181121] domain 0: span 0-1 level MC
[ 0.181124] groups: 1 0
[ 0.181235] devtmpfs: initialized
[ 0.181235] regulator: core version 0.5
[ 0.181235] NET: Registered protocol family 16
[ 0.181235] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.181235] ACPI: bus type pci registered
[ 0.181235] PCI: MCFG configuration 0: base c0000000 segment 0 buses
0 - 255
[ 0.181235] PCI: Not using MMCONFIG.
[ 0.181235] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
[ 0.181235] PCI: Using configuration type 1 for base access
[ 0.184046] bio: create slab <bio-0> at 0
[ 0.185511] ACPI: EC: EC description table is found, configuring boot EC
[ 0.188714] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.203644] ACPI: Interpreter enabled
[ 0.203734] ACPI: (supports S0 S3 S4 S5)
[ 0.203988] ACPI: Using IOAPIC for interrupt routing
[ 0.205764] PCI: MCFG configuration 0: base c0000000 segment 0 buses
0 - 255
[ 0.210134] PCI: MCFG area at c0000000 reserved in ACPI motherboard
resources
[ 0.210194] PCI: Using MMCONFIG for extended config space
[ 0.223958] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.227731] ACPI Warning: Incorrect checksum in table [ATKG] - 15,
should be 59 (20090903/tbutils-314)
[ 0.228279] ACPI: No dock devices found.
[ 0.228964] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.229171] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.229231] pci 0000:00:01.0: PME# disabled
[ 0.229366] pci 0000:00:1a.0: reg 20 io port: [0xe080-0xe09f]
[ 0.229429] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
[ 0.229499] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebff400-0xfebff7ff]
[ 0.229563] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.229624] pci 0000:00:1a.7: PME# disabled
[ 0.229726] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
[ 0.229780] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.229840] pci 0000:00:1b.0: PME# disabled
[ 0.229973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.230033] pci 0000:00:1c.0: PME# disabled
[ 0.230169] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.230229] pci 0000:00:1c.2: PME# disabled
[ 0.230364] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.230424] pci 0000:00:1c.3: PME# disabled
[ 0.230558] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.230618] pci 0000:00:1c.4: PME# disabled
[ 0.230751] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.230811] pci 0000:00:1c.5: PME# disabled
[ 0.230922] pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
[ 0.230985] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
[ 0.231047] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.231119] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff000-0xfebff3ff]
[ 0.231182] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.231243] pci 0000:00:1d.7: PME# disabled
[ 0.231446] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
[ 0.231516] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6
GPIO
[ 0.231577] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0300 (mask 0007)
[ 0.231648] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at
0250 (mask 000f)
[ 0.231762] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.231771] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.231781] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.231790] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.231800] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.231866] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
[ 0.231875] pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
[ 0.231884] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
[ 0.231893] pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
[ 0.231901] pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe41f]
[ 0.231911] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.231947] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.232007] pci 0000:00:1f.2: PME# disabled
[ 0.232113] pci 0000:01:00.0: reg 10 32bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.232122] pci 0000:01:00.0: reg 14 io port: [0x8000-0x80ff]
[ 0.232131] pci 0000:01:00.0: reg 18 32bit mmio: [0xfddf0000-0xfddfffff]
[ 0.232153] pci 0000:01:00.0: reg 30 32bit mmio pref:
[0xfddc0000-0xfdddffff]
[ 0.232179] pci 0000:01:00.0: supports D1 D2
[ 0.232219] pci 0000:01:00.1: reg 10 32bit mmio: [0xfddec000-0xfddeffff]
[ 0.232271] pci 0000:01:00.1: supports D1 D2
[ 0.232346] pci 0000:00:01.0: bridge io port: [0x6000-0x8fff]
[ 0.232351] pci 0000:00:01.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.232359] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xdbc00000-0xfbbfffff]
[ 0.232431] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdefc000-0xfdefffff]
[ 0.232443] pci 0000:02:00.0: reg 18 io port: [0x9800-0x98ff]
[ 0.232475] pci 0000:02:00.0: reg 30 32bit mmio pref:
[0xfdec0000-0xfdedffff]
[ 0.232523] pci 0000:02:00.0: supports D1 D2
[ 0.232527] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232589] pci 0000:02:00.0: PME# disabled
[ 0.232715] pci 0000:00:1c.0: bridge io port: [0x9000-0x9fff]
[ 0.232721] pci 0000:00:1c.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.232780] pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
[ 0.232786] pci 0000:00:1c.2: bridge 32bit mmio: [0xfdf00000-0xfe6fffff]
[ 0.232795] pci 0000:00:1c.2: bridge 64bit mmio pref:
[0xfbc00000-0xfdbfffff]
[ 0.232853] pci 0000:05:00.0: reg 10 32bit mmio: [0xfe7ffc00-0xfe7fffff]
[ 0.232872] pci 0000:05:00.0: reg 18 io port: [0xbc00-0xbc7f]
[ 0.232904] pci 0000:05:00.0: reg 30 32bit mmio pref:
[0xfe7e0000-0xfe7effff]
[ 0.233019] pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
[ 0.233025] pci 0000:00:1c.3: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.233098] pci 0000:06:00.0: reg 10 io port: [0xcc00-0xcc07]
[ 0.233110] pci 0000:06:00.0: reg 14 io port: [0xc880-0xc883]
[ 0.233122] pci 0000:06:00.0: reg 18 io port: [0xc800-0xc807]
[ 0.233134] pci 0000:06:00.0: reg 1c io port: [0xc480-0xc483]
[ 0.233146] pci 0000:06:00.0: reg 20 io port: [0xc400-0xc40f]
[ 0.233159] pci 0000:06:00.0: reg 24 32bit mmio: [0xfe8fe000-0xfe8fffff]
[ 0.233205] pci 0000:06:00.0: PME# supported from D3hot
[ 0.233266] pci 0000:06:00.0: PME# disabled
[ 0.233349] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.
You can enable it with 'pcie_aspm=force'
[ 0.233460] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.233466] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.233557] pci 0000:07:00.0: reg 10 64bit mmio: [0xfe9fe000-0xfe9fffff]
[ 0.233664] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.233727] pci 0000:07:00.0: PME# disabled
[ 0.233873] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.233923] pci 0000:08:01.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.233981] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold
[ 0.234042] pci 0000:08:01.0: PME# disabled
[ 0.234136] pci 0000:08:01.1: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff]
[ 0.234194] pci 0000:08:01.1: supports D1 D2
[ 0.234197] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.234259] pci 0000:08:01.1: PME# disabled
[ 0.234353] pci 0000:08:01.2: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff]
[ 0.234411] pci 0000:08:01.2: supports D1 D2
[ 0.234414] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.234476] pci 0000:08:01.2: PME# disabled
[ 0.234570] pci 0000:08:01.3: reg 10 32bit mmio: [0xfeafec00-0xfeafecff]
[ 0.234627] pci 0000:08:01.3: supports D1 D2
[ 0.234631] pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.234692] pci 0000:08:01.3: PME# disabled
[ 0.234787] pci 0000:08:01.4: reg 10 32bit mmio: [0xfeafe800-0xfeafe8ff]
[ 0.234844] pci 0000:08:01.4: supports D1 D2
[ 0.234848] pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.234909] pci 0000:08:01.4: PME# disabled
[ 0.235028] pci 0000:00:1e.0: transparent bridge
[ 0.235089] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.235132] pci_bus 0000:00: on NUMA node 0
[ 0.235141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.235414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.235604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.235746] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.235953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.236099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.236208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.236315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.267165] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.267861] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 10 12)
[ 0.268441] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.268842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12)
[ 0.269450] ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
[ 0.269851] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.270504] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.271155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.271752] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271828] vgaarb: loaded
[ 0.271917] PCI: Using ACPI for IRQ routing
[ 0.272303] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.272529] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.276031] Switching to clocksource tsc
[ 0.277968] pnp: PnP ACPI init
[ 0.278032] ACPI: bus type pnp registered
[ 0.282435] pnp: PnP ACPI: found 14 devices
[ 0.282492] ACPI: ACPI bus type pnp unregistered
[ 0.282550] PnPBIOS: Disabled by ACPI PNP
[ 0.282617] system 00:01: iomem range 0xfed14000-0xfed19fff has been
reserved
[ 0.282686] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.282746] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.282805] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.282865] system 00:08: ioport range 0x500-0x53f has been reserved
[ 0.282925] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[ 0.282986] system 00:08: iomem range 0xfed20000-0xfed3ffff has been
reserved
[ 0.283046] system 00:08: iomem range 0xfed45000-0xfed89fff has been
reserved
[ 0.283107] system 00:08: iomem range 0xffb00000-0xffbfffff has been
reserved
[ 0.283168] system 00:08: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.283246] system 00:0a: ioport range 0x250-0x253 has been reserved
[ 0.283306] system 00:0a: ioport range 0x256-0x25f has been reserved
[ 0.283365] system 00:0a: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.283434] system 00:0a: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.283498] system 00:0c: iomem range 0xc0000000-0xcfffffff has been
reserved
[ 0.283564] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.283624] system 00:0d: iomem range 0xc0000-0xcffff could not be
reserved
[ 0.283684] system 00:0d: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.283745] system 00:0d: iomem range 0x100000-0xbfffffff could not
be reserved
[ 0.318643] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.318703] pci 0000:00:01.0: IO window: 0x6000-0x8fff
[ 0.318764] pci 0000:00:01.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.318824] pci 0000:00:01.0: PREFETCH window:
0x000000dbc00000-0x000000fbbfffff
[ 0.318895] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.318955] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
[ 0.319016] pci 0000:00:1c.0: MEM window: 0xfde00000-0xfdefffff
[ 0.319077] pci 0000:00:1c.0: PREFETCH window:
0x000000d0000000-0x000000d01fffff
[ 0.319149] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 0.319208] pci 0000:00:1c.2: IO window: 0xa000-0xafff
[ 0.319279] pci 0000:00:1c.2: MEM window: 0xfdf00000-0xfe6fffff
[ 0.319340] pci 0000:00:1c.2: PREFETCH window:
0x000000fbc00000-0x000000fdbfffff
[ 0.319412] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.319471] pci 0000:00:1c.3: IO window: 0xb000-0xbfff
[ 0.319532] pci 0000:00:1c.3: MEM window: 0xfe700000-0xfe7fffff
[ 0.319593] pci 0000:00:1c.3: PREFETCH window:
0x000000d0200000-0x000000d03fffff
[ 0.319665] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 0.319725] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.319786] pci 0000:00:1c.4: MEM window: 0xfe800000-0xfe8fffff
[ 0.319847] pci 0000:00:1c.4: PREFETCH window:
0x000000d0400000-0x000000d05fffff
[ 0.319919] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 0.319977] pci 0000:00:1c.5: IO window: disabled
[ 0.320037] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.320097] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.320160] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.320218] pci 0000:00:1e.0: IO window: disabled
[ 0.320278] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.320338] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.320411] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320472] pci 0000:00:01.0: setting latency timer to 64
[ 0.320483] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320545] pci 0000:00:1c.0: setting latency timer to 64
[ 0.320557] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.320618] pci 0000:00:1c.2: setting latency timer to 64
[ 0.320631] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.320692] pci 0000:00:1c.3: setting latency timer to 64
[ 0.320704] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320765] pci 0000:00:1c.4: setting latency timer to 64
[ 0.320778] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.320839] pci 0000:00:1c.5: setting latency timer to 64
[ 0.320848] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320854] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.320859] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.320863] pci_bus 0000:01: resource 0 io: [0x6000-0x8fff]
[ 0.320868] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.320872] pci_bus 0000:01: resource 2 pref mem [0xdbc00000-0xfbbfffff]
[ 0.320877] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.320881] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.320885] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd01fffff]
[ 0.320890] pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
[ 0.320894] pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfe6fffff]
[ 0.320898] pci_bus 0000:03: resource 2 pref mem [0xfbc00000-0xfdbfffff]
[ 0.320903] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff]
[ 0.320907] pci_bus 0000:05: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.320912] pci_bus 0000:05: resource 2 pref mem [0xd0200000-0xd03fffff]
[ 0.320916] pci_bus 0000:06: resource 0 io: [0xc000-0xcfff]
[ 0.320921] pci_bus 0000:06: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.320925] pci_bus 0000:06: resource 2 pref mem [0xd0400000-0xd05fffff]
[ 0.320929] pci_bus 0000:07: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.320934] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.320938] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.320942] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.320982] NET: Registered protocol family 2
[ 0.321148] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.321599] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.322217] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.322526] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.322585] TCP reno registered
[ 0.322724] NET: Registered protocol family 1
[ 0.571261] pci 0000:01:00.0: Boot video device
[ 0.571332] Unpacking initramfs...
[ 0.957621] Freeing initrd memory: 8292k freed
[ 0.962539] Simple Boot Flag at 0x52 set to 0x1
[ 0.963006] audit: initializing netlink socket (disabled)
[ 0.963078] type=2000 audit(1279706869.959:1): initialized
[ 0.963474] highmem bounce pool size: 64 pages
[ 0.963535] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.965729] VFS: Disk quotas dquot_6.5.2
[ 0.965864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.966032] msgmni has been set to 1707
[ 0.966354] alg: No test for stdrng (krng)
[ 0.966480] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.966548] io scheduler noop registered
[ 0.966604] io scheduler anticipatory registered
[ 0.966660] io scheduler deadline registered
[ 0.966770] io scheduler cfq registered (default)
[ 0.967014] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.967024] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.967182] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.967193] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.967356] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.967367] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.967522] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.967533] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.967686] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.967697] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.967853] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.967864] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.968084] isapnp: Scanning for PnP cards...
[ 1.321315] isapnp: No Plug & Play device found
[ 1.323420] Linux agpgart interface v0.103
[ 1.323698] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.324401] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 1.326864] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.329331] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.329393] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.329456] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.329515] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.329575] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.329708] mice: PS/2 mouse device common for all mice
[ 1.329836] rtc_cmos 00:03: RTC can wake from S4
[ 1.329945] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.330027] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.330895] cpuidle: using governor ladder
[ 1.330950] cpuidle: using governor menu
[ 1.331009] No iBFT detected.
[ 1.331555] TCP cubic registered
[ 1.331813] NET: Registered protocol family 10
[ 1.332538] lo: Disabled Privacy Extensions
[ 1.333047] Mobile IPv6
[ 1.333102] NET: Registered protocol family 17
[ 1.333172] Using IPI No-Shortcut mode
[ 1.333317] PM: Resume from disk failed.
[ 1.333323] registered taskstats version 1
[ 1.334067] rtc_cmos 00:03: setting system clock to 2010-07-21
10:07:51 UTC (1279706871)
[ 1.334176] Initalizing network drop monitor service
[ 1.334261] Freeing unused kernel memory: 372k freed
[ 1.334578] Write protecting the kernel text: 2492k
[ 1.334665] Write protecting the kernel read-only data: 916k
[ 1.357991] udev: starting version 158
[ 1.364587] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.562866] usbcore: registered new interface driver usbfs
[ 1.563001] usbcore: registered new interface driver hub
[ 1.563135] usbcore: registered new device driver usb
[ 1.567186] sky2 driver version 1.25
[ 1.567291] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.567361] sky2 0000:02:00.0: setting latency timer to 64
[ 1.567392] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.567554] sky2 0000:02:00.0: irq 30 for MSI/MSI-X
[ 1.570086] sky2 eth0: addr 00:1f:c6:58:44:29
[ 1.571350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.571439] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.571514] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.571519] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.571597] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.571692] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.575638] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.575657] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
[ 1.588010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.588093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.588153] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.588221] usb usb1: Product: EHCI Host Controller
[ 1.588278] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.588336] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.588567] usb usb1: configuration #1 chosen from 1 choice
[ 1.588722] hub 1-0:1.0: USB hub found
[ 1.588786] hub 1-0:1.0: 4 ports detected
[ 1.588918] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.588990] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.588995] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.589062] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.589156] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.593096] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.597004] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
[ 1.598642] SCSI subsystem initialized
[ 1.612011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.612103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.612163] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.612230] usb usb2: Product: EHCI Host Controller
[ 1.612287] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.612345] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.612558] usb usb2: configuration #1 chosen from 1 choice
[ 1.612711] hub 2-0:1.0: USB hub found
[ 1.612775] hub 2-0:1.0: 6 ports detected
[ 1.627323] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.627418] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 1.627485] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.627490] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.627558] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.627659] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
[ 1.627758] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.627818] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.627886] usb usb3: Product: UHCI Host Controller
[ 1.627942] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.628021] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.628175] usb usb3: configuration #1 chosen from 1 choice
[ 1.628274] hub 3-0:1.0: USB hub found
[ 1.628335] hub 3-0:1.0: 2 ports detected
[ 1.628458] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 1.628522] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.628527] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.628592] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.628691] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 1.628791] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.628851] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.628918] usb usb4: Product: UHCI Host Controller
[ 1.628974] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.629032] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.629171] usb usb4: configuration #1 chosen from 1 choice
[ 1.629268] hub 4-0:1.0: USB hub found
[ 1.629330] hub 4-0:1.0: 2 ports detected
[ 1.629452] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 1.629519] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.629524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.629589] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[ 1.629679] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 1.629778] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.629838] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.629905] usb usb5: Product: UHCI Host Controller
[ 1.629961] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.630019] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.630166] usb usb5: configuration #1 chosen from 1 choice
[ 1.630262] hub 5-0:1.0: USB hub found
[ 1.630323] hub 5-0:1.0: 2 ports detected
[ 1.630441] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 1.630505] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.630510] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.630575] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[ 1.630673] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 1.630769] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.630829] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.630896] usb usb6: Product: UHCI Host Controller
[ 1.630952] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.631010] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.631147] usb usb6: configuration #1 chosen from 1 choice
[ 1.631243] hub 6-0:1.0: USB hub found
[ 1.631304] hub 6-0:1.0: 2 ports detected
[ 1.631420] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.631484] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.631489] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.631553] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 7
[ 1.631644] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.631739] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.631799] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.631866] usb usb7: Product: UHCI Host Controller
[ 1.631923] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.631981] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.632138] usb usb7: configuration #1 chosen from 1 choice
[ 1.632235] hub 7-0:1.0: USB hub found
[ 1.632297] hub 7-0:1.0: 2 ports detected
[ 1.639383] libata version 3.00 loaded.
[ 1.647043] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 1.647105] ricoh-mmc: Copyright(c) Philip Langdale
[ 1.647183] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2
[1180:0843] (rev 12)
[ 1.647268] ricoh-mmc: Controller is now disabled.
[ 1.649883] ahci 0000:00:1f.2: version 3.0
[ 1.649902] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.650008] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
[ 1.650087] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x7 impl SATA mode
[ 1.650158] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part ccc ems
[ 1.650229] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.663687] sdhci: Secure Digital Host Controller Interface driver
[ 1.663749] sdhci: Copyright(c) Pierre Ossman
[ 1.669067] scsi0 : ahci
[ 1.669515] sdhci-pci 0000:08:01.1: SDHCI controller found
[1180:0822] (rev 22)
[ 1.669622] sdhci-pci 0000:08:01.1: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 1.669929] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.669997] ACPI: Thermal Zone [THRM] (50 C)
[ 1.670721] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 1.671834] Registered led device: mmc0::
[ 1.672949] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
[ 1.677799] scsi1 : ahci
[ 1.680473] firewire_ohci 0000:08:01.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.681426] scsi2 : ahci
[ 1.681789] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebff900 irq 31
[ 1.681859] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebff980 irq 31
[ 1.681928] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port
0xfebffa00 irq 31
[ 1.682035] ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.682274] ata_piix 0000:00:1f.1: version 2.13
[ 1.682288] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 1.682390] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.682476] scsi3 : ata_piix
[ 1.682706] scsi4 : ata_piix
[ 1.683729] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14
[ 1.683791] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
irq 15
[ 1.684342] ata5: port disabled. ignoring.
[ 1.696033] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps
0x1 impl SATA mode
[ 1.696105] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio
slum part
[ 1.696168] ahci 0000:06:00.0: setting latency timer to 64
[ 1.696274] scsi5 : ahci
[ 1.696400] ata6: SATA max UDMA/133 abar m8192@0xfe8fe000 port
0xfe8fe100 irq 16
[ 1.760011] firewire_ohci: Added fw-ohci device 0000:08:01.0, OHCI
version 1.0
[ 1.848341] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[ 1.864238] ata4.00: configured for UDMA/33
[ 2.000022] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.000095] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.000166] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.001677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 2.001818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES)
succeeded
[ 2.001824] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 2.002516] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 2.002575] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.004240] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 2.004378] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES)
succeeded
[ 2.004384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 2.005090] ata1.00: configured for UDMA/133
[ 2.017026] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.020133] scsi 0:0:0:0: Direct-Access ATA ST9250827AS
3.AA PQ: 0 ANSI: 5
[ 2.023900] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N
WR02 PQ: 0 ANSI: 5
[ 2.041615] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[ 2.041761] sd 0:0:0:0: [sda] Write Protect is off
[ 2.041819] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.041854] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.042115] sda: sda1 sda2 <
[ 2.072017] usb 2-6: new high speed USB device using ehci_hcd and
address 3
[ 2.083920] sda5 >
[ 2.084451] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.100448] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.100519] Uniform CD-ROM driver Revision: 3.20
[ 2.100701] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.107244] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.107828] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.221744] usb 2-6: New USB device found, idVendor=04f2, idProduct=b012
[ 2.221808] usb 2-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 2.221869] usb 2-6: Product: USB2.0 1.3M UVC WebCam
[ 2.221927] usb 2-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.221985] usb 2-6: SerialNumber: SN0001
[ 2.222142] usb 2-6: configuration #1 chosen from 1 choice
[ 2.260120] firewire_core: created device fw0: GUID 001e8c000128b426,
S400
[ 2.376978] PM: Starting manual resume from disk
[ 2.377074] PM: Resume from partition 8:5
[ 2.377077] PM: Checking hibernation image.
[ 2.377238] PM: Error -22 checking image file
[ 2.377242] PM: Resume from disk failed.
[ 2.442230] kjournald starting. Commit interval 5 seconds
[ 2.442297] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.464043] usb 3-1: new full speed USB device using uhci_hcd and
address 2
[ 2.709576] usb 3-1: New USB device found, idVendor=0b05, idProduct=1712
[ 2.709638] usb 3-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=3
[ 2.709698] usb 3-1: SerialNumber: 0194E8-5B-0002
[ 2.709868] usb 3-1: configuration #1 chosen from 1 choice
[ 2.952016] usb 6-1: new low speed USB device using uhci_hcd and
address 2
[ 3.127515] usb 6-1: New USB device found, idVendor=046d, idProduct=c047
[ 3.127577] usb 6-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.127636] usb 6-1: Product: USB Optical Mouse
[ 3.127692] usb 6-1: Manufacturer: Logitech
[ 3.127840] usb 6-1: configuration #1 chosen from 1 choice
[ 5.061161] udev: starting version 158
[ 5.484868] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 5.484954] ACPI: Sleep Button [SLPB]
[ 5.485422] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 5.491956] ACPI: Lid Switch [LID]
[ 5.492101] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.492173] ACPI: Power Button [PWRF]
[ 5.492460] Asus Laptop ACPI Extras version 0.30
[ 5.531823] unsupported model X55SR, trying default values
[ 5.531885] send /proc/acpi/dsdt to the developers
[ 5.598838] ACPI: Battery Slot [BAT0] (battery present)
[ 5.599077] ACPI: AC Adapter [AC0] (off-line)
[ 6.213678] ACPI: SSDT bffb63a0 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20051117)
[ 6.215646] ACPI: SSDT bffb6700 00712 (v01 PmRef Cpu0Cst 00003001
INTL 20051117)
[ 6.217489] Monitor-Mwait will be used to enter C-1 state
[ 6.217520] Monitor-Mwait will be used to enter C-2 state
[ 6.217547] Monitor-Mwait will be used to enter C-3 state
[ 6.217556] Marking TSC unstable due to TSC halts in idle
[ 6.217740] processor LNXCPU:00: registered as cooling_device0
[ 6.218013] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 6.218325] ACPI: SSDT bffb62d0 000C8 (v01 PmRef Cpu1Ist 00003000
INTL 20051117)
[ 6.219074] ACPI: SSDT bffb6670 00085 (v01 PmRef Cpu1Cst 00003000
INTL 20051117)
[ 6.222355] processor LNXCPU:01: registered as cooling_device1
[ 6.230188] Switching to clocksource hpet
[ 6.236207] asus_laptop: Asus Laptop Support version 0.42
[ 6.242316] asus_laptop: X55SR model detected
[ 6.243489] input: Asus Laptop extra buttons as
/devices/virtual/input/input5
[ 6.243678] Registered led device: asus::mail
[ 6.243755] Registered led device: asus::touchpad
[ 6.247082] asus_laptop: Brightness ignored, must be controlled by
ACPI video driver
[ 6.463222] Bluetooth: Core ver 2.15
[ 6.463336] NET: Registered protocol family 31
[ 6.463393] Bluetooth: HCI device and connection manager initialized
[ 6.463454] Bluetooth: HCI socket layer initialized
[ 6.706497] cfg80211: Using static regulatory domain info
[ 6.706559] cfg80211: Regulatory domain: US
[ 6.706614] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 6.706682] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.706742] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.706801] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.706861] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.706920] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.706980] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.707380] cfg80211: Calling CRDA for country: US
[ 6.718030] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.721055] usbcore: registered new interface driver btusb
[ 6.729738] usbcore: registered new interface driver hiddev
[ 6.737353] acpi device:04: registered as cooling_device2
[ 6.737924] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 6.738107] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.744377] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7
[ 6.744575] generic-usb 0003:046D:C047.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 6.744682] usbcore: registered new interface driver usbhid
[ 6.744745] usbhid: v2.6:USB HID core driver
[ 6.759135] Linux video capture interface: v2.00
[ 6.771888] uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam
(04f2:b012)
[ 6.775942] input: USB2.0 1.3M UVC WebCam as
/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
[ 6.776121] usbcore: registered new interface driver uvcvideo
[ 6.776182] USB Video Class driver (v0.1.0)
[ 6.957142] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3,
caps: 0xa04713/0x10008/0x0
[ 6.995668] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input9
[ 7.388433] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27ks
[ 7.388506] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.388634] iwlagn 0000:07:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 7.388700] iwlagn 0000:07:00.0: setting latency timer to 64
[ 7.388737] iwlagn 0000:07:00.0: Detected Intel Wireless WiFi Link
4965AGN REV=0x4
[ 7.428654] iwlagn 0000:07:00.0: Tunable channels: 13 802.11bg, 19
802.11a channels
[ 7.428790] iwlagn 0000:07:00.0: irq 32 for MSI/MSI-X
[ 7.533942] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.832408] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 7.832525] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.946733] hda_codec: ALC1200: BIOS auto-probing.
[ 7.947945] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 7.964157] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 7.964278] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.210737] Adding 2988048k swap on /dev/sda5. Priority:-1 extents:1
across:2988048k
[ 9.406544] EXT3 FS on sda1, internal journal
[ 9.583600] loop: module loaded
[ 13.192784] fuse init (API version 7.13)
[ 14.652695] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input11
[ 18.000204] sky2 eth0: enabling interface
[ 18.000574] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.003430] iwlagn 0000:07:00.0: firmware: requesting
iwlwifi-4965-2.ucode
[ 18.053133] iwlagn 0000:07:00.0: loaded firmware version 228.61.2.24
[ 18.270717] Registered led device: iwl-phy0::radio
[ 18.270806] Registered led device: iwl-phy0::assoc
[ 18.270886] Registered led device: iwl-phy0::RX
[ 18.271255] Registered led device: iwl-phy0::TX
[ 18.322673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.279727] Bluetooth: L2CAP ver 2.14
[ 22.279732] Bluetooth: L2CAP socket layer initialized
[ 22.286279] Bluetooth: RFCOMM TTY layer initialized
[ 22.286284] Bluetooth: RFCOMM socket layer initialized
[ 22.286288] Bluetooth: RFCOMM ver 1.11
[ 22.375834] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.375839] Bluetooth: BNEP filters: protocol multicast
[ 22.451498] Bridge firewalling registered
[ 22.486265] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.688394] [drm] Initialized drm 1.1.0 20060810
[ 22.768722] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.768726] Bluetooth: SCO socket layer initialized
[ 22.847551] [drm] radeon kernel modesetting enabled.
[ 22.847615] radeon 0000:01:00.0: setting latency timer to 64
[ 22.849973] [drm] radeon: Initializing kernel modesetting.
[ 22.851546] [drm] register mmio base: 0xFDDF0000
[ 22.851551] [drm] register mmio size: 65536
[ 22.851688] ATOM BIOS: M82XT
[ 22.851703] [drm] Clocks initialized !
[ 22.853222] [drm] Detected VRAM RAM=256M, BAR=256M
[ 22.853228] [drm] RAM width 64bits DDR
[ 22.853341] [TTM] Zone kernel: Available graphics memory: 437322 kiB.
[ 22.853345] [TTM] Zone highmem: Available graphics memory: 1557390 kiB.
[ 22.853366] [drm] radeon: 256M of VRAM memory ready
[ 22.853370] [drm] radeon: 512M of GTT memory ready.
[ 22.853438] radeon 0000:01:00.0: irq 33 for MSI/MSI-X
[ 22.853446] [drm] radeon: using MSI.
[ 22.853486] [drm] radeon: irq initialized.
[ 22.853491] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 22.853805] [drm] Loading RV620 Microcode
[ 22.853810] platform radeon_cp.0: firmware: requesting
radeon/RV620_pfp.bin
[ 22.967233] platform radeon_cp.0: firmware: requesting
radeon/RV620_me.bin
[ 23.029553] platform radeon_cp.0: firmware: requesting
radeon/R600_rlc.bin
[ 23.085145] [drm] ring test succeeded in 0 usecs
[ 23.085347] [drm] radeon: ib pool ready.
[ 23.085437] [drm] ib test succeeded in 0 usecs
[ 23.085441] [drm] Enabling audio support
[ 23.085690] [drm] Radeon Display Connectors
[ 23.085693] [drm] Connector 0:
[ 23.085696] [drm] VGA
[ 23.085700] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48
0x7e4c 0x7e4c
[ 23.085705] [drm] Encoders:
[ 23.085707] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 23.085710] [drm] Connector 1:
[ 23.085713] [drm] LVDS
[ 23.085717] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70
0x7f74 0x7f74
[ 23.085721] [drm] Encoders:
[ 23.085723] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 23.085726] [drm] Connector 2:
[ 23.085729] [drm] HDMI-A
[ 23.085731] [drm] HPD4
[ 23.085735] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28
0x7e2c 0x7e2c
[ 23.085739] [drm] Encoders:
[ 23.085741] [drm] DFP1: INTERNAL_UNIPHY
[ 23.222594] [drm] fb mappable at 0xE0141000
[ 23.222599] [drm] vram apper at 0xE0000000
[ 23.222602] [drm] size 4096000
[ 23.222604] [drm] fb depth is 24
[ 23.222607] [drm] pitch is 5120
[ 23.223540] Console: switching to colour frame buffer device 160x50
[ 23.223552] fb0: radeondrmfb frame buffer device
[ 23.223555] registered panic notifier
[ 23.223563] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0
on minor 0
[ 23.624934] lp: driver loaded but no devices found
[ 23.642476] ppdev: user-space parallel port driver
[ 28.974619] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 28.974626] vboxdrv: Successfully done.
[ 28.974631] vboxdrv: Found 2 processor cores.
[ 28.974783] vboxdrv: fAsync=0 offMin=0x498 offMax=0x1350
[ 28.974875] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 28.974880] vboxdrv: Successfully loaded version 3.2.6 (interface
0x00140001).
[ 83.788812] wlan0: direct probe to AP 00:1a:2b:4a:28:af (try 1)
[ 83.791234] wlan0: direct probe responded
[ 83.791243] wlan0: authenticate with AP 00:1a:2b:4a:28:af (try 1)
[ 83.793291] wlan0: authenticated
[ 83.793323] wlan0: associate with AP 00:1a:2b:4a:28:af (try 1)
[ 83.795672] wlan0: RX AssocResp from 00:1a:2b:4a:28:af (capab=0x411
status=0 aid=1)
[ 83.795679] wlan0: associated
[ 83.815322] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 88.862000] padlock: VIA PadLock not detected.
[ 94.372230] wlan0: no IPv6 routers present
Reply to: