Your message dated Mon, 19 Apr 2010 15:08:09 +0200 with message-id <20100419130809.GA23934@patate.is-a-geek.org> and subject line Re: Bug#515239: xrandr doesn't support TV_FORMAT for the S-Video output of the D945GCLF2 integrated video has caused the Debian Bug report #515239, regarding xrandr doesn't support TV_FORMAT for the S-Video output of the D945GCLF2 integrated video to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 515239: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=515239 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Cc: Ivan Shmakov <oneingray@gmail.com>
- Subject: xrandr doesn't support TV_FORMAT for the S-Video output of the D945GCLF2 integrated video
- From: Ivan Shmakov <oneingray@gmail.com>
- Date: Sun, 15 Feb 2009 12:52:58 +0600
- Message-id: <87zlgo5gz9.fsf@violet.siamics.int>
Package: xserver-xorg-video-intel Version: 2:2.6.1-1 Although the integrated video card on the Intel D945GCLF2 motherboard has S-Video output, it's not usable since the desired format can't be set: $ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1280 VGA connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm ... TV-1 disconnected (normal left inverted right x axis y axis) $ xrandr --output TV-1 --set TV_FORMAT PAL X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 149 (RANDR) Minor opcode of failed request: 11 () Serial number of failed request: 23 Current serial number in output stream: 23 $ (I've tried the above with the TV set disconnected, but, apparently, the same output is shown when the TV is connected.) A similar problem was reported here: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/298422 It seems that a working patch is available, too. The relevant packages are: Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================-============================-============================================ ii libxrandr2 2:1.2.99.4-2 X11 RandR extension library ii x11-xserver-utils 7.4+1 X server utilities ii xserver-xorg 1:7.4~5 the X.Org X server ii xserver-xorg-video-intel 2:2.6.1-1 X.Org X server -- Intel i8xx, i9xx display d The X.org X server log is attached. -- FSF associate member #7257This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.5.99.901 (1.6.0 RC 1) Release Date: (unreleased) X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18-6-686 i686 Debian Current Operating System: Linux blackberry.siamics.int 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 Build Date: 23 January 2009 08:18:28PM xorg-server 2:1.5.99.901-2 (jcristau@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 15 06:36:51 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3de0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0x50200000/0, 0x40000000/0, 0x50280000/0, I/O @ 0x000020e0/0 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers (II) Matched intel from file name intel.ids (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.6.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intelб╝ GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945G (--) intel(0): Chipset: "945G" (--) intel(0): Linear framebuffer at 0x40000000 (--) intel(0): IO registers at addr 0x50200000 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TV-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 02:C2.02, clock range 25.0MHz - 160.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: RGB0 output reported (II) intel(0): SDVOB: CVBS0 output reported (II) intel(0): SDVOB: SVID0 output reported (II) intel(0): SDVOB: YPRPB0 output reported (II) intel(0): SDVOB: SCART0 output reported (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Output VGA connected (II) intel(0): Output TV-1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1280x1024 (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (340, 270) mm (**) intel(0): DPI set to (95, 120) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00020203 to 0x80020203 (WW) intel(0): PIPEASTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 238848 total, 1 used (II) intel(0): I830CheckAvailableMemory: 955388 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0x50200000 (II) intel(0): [drm] ring buffer = 0x40000000 (II) intel(0): [drm] mapped front buffer at 0x41000000, handle = 0x41000000 (II) intel(0): [drm] mapped back buffer at 0x44000000, handle = 0x44000000 (II) intel(0): [drm] mapped depth buffer at 0x45000000, handle = 0x45000000 (II) intel(0): [drm] mapped classic textures at 0x46000000, handle = 0x46000000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) EXA(0): Offscreen pixmap area of 31457280 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x000000003f820000 physical ) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB) (II) intel(0): 0x00132000-0x00132fff: overlay registers (4 kB, 0x000000003f932000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB) (II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled (II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled (II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): ESR is 0x00000001, instruction error (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TV-1 is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 270 (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.99.901, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) ImPS/2 Generic Wheel Mouse: always reports core events (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4" (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE) (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00 (**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms (**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "evdev" (**) AT Translated Set 2 keyboard: xkb_model: "evdev" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) intel(0): xf86UnbindGARTMemory: unbind key 2 (II) intel(0): xf86UnbindGARTMemory: unbind key 3 (II) intel(0): xf86UnbindGARTMemory: unbind key 4 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x000000003f820000 physical ) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB) (II) intel(0): 0x00132000-0x00132fff: overlay registers (4 kB, 0x000000003f932000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB) (II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled (II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled (II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): ESR is 0x00000001, instruction error (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TV-1 is connected to pipe none (II) intel(0): [drm] mapped front buffer at 0x41000000, handle = 0x18200000 (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) AIGLX: Suspending AIGLX clients for VT switch (II) intel(0): xf86UnbindGARTMemory: unbind key 0 (II) intel(0): xf86UnbindGARTMemory: unbind key 1 (II) intel(0): xf86UnbindGARTMemory: unbind key 2 (II) intel(0): xf86UnbindGARTMemory: unbind key 3 (II) intel(0): xf86UnbindGARTMemory: unbind key 4 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 0x000000003f820000 physical ) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB) (II) intel(0): 0x00132000-0x00132fff: overlay registers (4 kB, 0x000000003f932000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled (II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB) (II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled (II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled (II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): ESR is 0x00000001, instruction error (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output TV-1 is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) ImPS/2 Generic Wheel Mouse: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "SAM", prod id 869 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): EDID vendor "SAM", prod id 869
--- End Message ---
--- Begin Message ---
- To: Ivan Shmakov <oneingray@gmail.com>, 515239-done@bugs.debian.org
- Subject: Re: Bug#515239: xrandr doesn't support TV_FORMAT for the S-Video output of the D945GCLF2 integrated video
- From: Julien Cristau <jcristau@debian.org>
- Date: Mon, 19 Apr 2010 15:08:09 +0200
- Message-id: <20100419130809.GA23934@patate.is-a-geek.org>
- In-reply-to: <87zlgo5gz9.fsf@violet.siamics.int>
- References: <87zlgo5gz9.fsf@violet.siamics.int>
On Sun, Feb 15, 2009 at 12:52:58 +0600, Ivan Shmakov wrote: > Package: xserver-xorg-video-intel > Version: 2:2.6.1-1 > > Although the integrated video card on the Intel D945GCLF2 > motherboard has S-Video output, it's not usable since the > desired format can't be set: > > $ xrandr > Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1280 > VGA connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm > ... > TV-1 disconnected (normal left inverted right x axis y axis) > $ xrandr --output TV-1 --set TV_FORMAT PAL > X Error of failed request: BadName (named color or font does not exist) > Major opcode of failed request: 149 (RANDR) > Minor opcode of failed request: 11 () > Serial number of failed request: 23 > Current serial number in output stream: 23 > $ > If you still have issues with kms (latest kernel and driver) please file a new bug with xrandr --verbose output, X log and dmesg. Closing this one, thanks for your report. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---