Re: nouveau
First, Thanks very very much for all the stuff you dd's get done...
I have a hard time just getting through all the mail to this list, some days....
See full dmesg at bottom ...
--- On Wed, 3/31/10, Cyril Brulebois <kibi@debian.org> wrote:
From: Cyril Brulebois <kibi@debian.org>
Subject: Re: nouveau
To: "Will Set" <debiandunes@yahoo.com>
Cc: debian-x@lists.debian.org
Date: Wednesday, March 31, 2010, 4:36 AM
Hi,
Hi, ......
Will Set <debiandunes@yahoo.com> (31/03/2010):
> xserver-xorg-video-nouveau_0.0.15+git20100219+9b4118d-1_i386.deb
it'd be nice if you could try and get rid of this vesafb thingy,
Done .......
I
assume you're loading this from the kernel commandline?
Yes it was, I removed it.....
See below, it
looks like it's conflicting with nouveau at some point.
I think Michael is right here. What I've noticed is that when KMS fails the new framebuffer driver never aquires /dev/fb0 causing DRM to fail also.....
It'd also be nice to know which kernel version you're running.
I'm using 2.6.32-4-686 but I have the linux-base from experimental installed as well as 2.6.33-2-686 .....
IOW,
please paste full dmesg.
OK .......
> [ 457.021371] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
^^^^ that probably doesn't help.
Heh, I've seen similar more than just a few times since the beginning of the year....
> [ 457.316471] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
That could be a consequence.
It sounds like Sven knows what is missing in the driver/firmware .....
Just wild guesses anyway.
There is no noticeable difference to me "the user" except the screensize was reduced from 1280x1024 with the xserver-xoreg-video-nv driver to 1024x768 with the xserver-xorg-video-nouveau driver
Mraw,
KiBi.
full dmesg as requested.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-686 (Debian 2.6.32-10) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 17:16:41 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe30000 (usable)
[ 0.000000] BIOS-e820: 000000003fe30000 - 000000003fe3e6d5 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff10000 - 000000003ff30000 (reserved)
[ 0.000000] BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3fe30 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3f57d000 - 3fe1f62e
[ 0.000000] Allocated new RAMDISK: 00100000 - 009a262e
[ 0.000000] Move RAMDISK from 000000003f57d000 - 000000003fe1f62d to 00100000 - 009a262d
[ 0.000000] ACPI: RSDP 000f62c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3ff30000 00034 (v01 INTEL D865PERL 20050213 MSFT 00000097)
[ 0.000000] ACPI: FACP 3ff30200 00081 (v02 INTEL D865PERL 20050213 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3ff30370 04272 (v01 INTEL D865PERL 00000006 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ff40000 00040
[ 0.000000] ACPI: APIC 3ff30300 00068 (v01 INTEL D865PERL 20050213 MSFT 00000097)
[ 0.000000] ACPI: ASF! 3ff345f0 00099 (v16 LEGEND I865PASF 00000001 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 3ff34689 00040 (v01 INTEL OEMWDDT 00000001 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 138MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014bb4f4] TEXT DATA BSS ==> [0001000000 - 00014bb4f4]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014bc000 - 00014c2198] BRK ==> [00014bc000 - 00014c2198]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 00009a262e] NEW RAMDISK ==> [0000100000 - 00009a262e]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fe30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fe30
[ 0.000000] On node 0 totalpages: 261583
[ 0.000000] free_area_init_node: node 0, pgdat c13a8100, node_mem_map c14c4000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 277 pages used for memmap
[ 0.000000] HighMem zone: 35101 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:becf0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u2097152
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259538
[ 0.000000] Kernel command line: root=/dev/md4 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fe30)
[ 0.000000] Memory: 1022984k/1046720k available (2469k kernel code, 22876k reserved, 1313k data, 372k init, 141512k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b2000 - 0xc140f000 ( 372 kB)
[ 0.000000] .data : 0xc126957d - 0xc13b1c60 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126957d (2469 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2992.684 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.36 BogoMIPS (lpj=11970736)
[ 0.004103] Security Framework initialized
[ 0.004149] SELinux: Disabled at boot.
[ 0.004196] Mount-cache hash table entries: 512
[ 0.004370] Initializing cgroup subsys ns
[ 0.004415] Initializing cgroup subsys cpuacct
[ 0.004459] Initializing cgroup subsys devices
[ 0.004502] Initializing cgroup subsys freezer
[ 0.004544] Initializing cgroup subsys net_cls
[ 0.004607] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004683] CPU: L2 cache: 512K
[ 0.004725] CPU: Physical Processor ID: 0
[ 0.004766] CPU: Processor Core ID: 0
[ 0.004809] mce: CPU supports 4 MCE banks
[ 0.004859] CPU0: Thermal monitoring enabled (TM1)
[ 0.004910] Performance Events: no PMU driver, software events only.
[ 0.004991] Checking 'hlt' instruction... OK.
[ 0.021215] ACPI: Core revision 20090903
[ 0.029673] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069407] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.156120] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.156489] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160097] Brought up 2 CPUs
[ 0.160146] Total of 2 processors activated (11970.65 BogoMIPS).
[ 0.160370] CPU0 attaching sched-domain:
[ 0.160375] domain 0: span 0-1 level SIBLING
[ 0.160379] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.160387] domain 1: span 0-1 level MC
[ 0.160390] groups: 0-1 (cpu_power = 1178)
[ 0.160397] CPU1 attaching sched-domain:
[ 0.160400] domain 0: span 0-1 level SIBLING
[ 0.160403] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.160410] domain 1: span 0-1 level MC
[ 0.160413] groups: 0-1 (cpu_power = 1178)
[ 0.160628] devtmpfs: initialized
[ 0.161153] regulator: core version 0.5
[ 0.161260] NET: Registered protocol family 16
[ 0.161404] ACPI: bus type pci registered
[ 0.162734] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.162778] PCI: Using configuration type 1 for base access
[ 0.163318] bio: create slab <bio-0> at 0
[ 0.164758] ACPI: EC: Look up EC in DSDT
[ 0.166985] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.171047] ACPI: Interpreter enabled
[ 0.171098] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.171328] ACPI: Using IOAPIC for interrupt routing
[ 0.177770] ACPI: Power Resource [URP1] (off)
[ 0.177847] ACPI: Power Resource [FDDP] (off)
[ 0.177922] ACPI: Power Resource [LPTP] (off)
[ 0.178163] ACPI: No dock devices found.
[ 0.178337] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.178422] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.178473] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.178581] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.178669] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f]
[ 0.178721] pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
[ 0.178774] pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
[ 0.178826] pci 0000:00:1d.3: reg 20 io port: [0xd800-0xd81f]
[ 0.178886] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe200000-0xfe2003ff]
[ 0.178942] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.178989] pci 0000:00:1d.7: PME# disabled
[ 0.179115] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.179122] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.179174] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.179240] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.179247] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.179255] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.179262] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.179269] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.179276] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.179307] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
[ 0.179313] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
[ 0.179320] pci 0000:00:1f.2: reg 18 io port: [0xe400-0xe407]
[ 0.179327] pci 0000:00:1f.2: reg 1c io port: [0xe000-0xe003]
[ 0.179333] pci 0000:00:1f.2: reg 20 io port: [0xdc00-0xdc0f]
[ 0.179384] pci 0000:00:1f.3: reg 20 io port: [0xc800-0xc81f]
[ 0.179438] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe200400-0xfe2005ff]
[ 0.179445] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe200800-0xfe2008ff]
[ 0.179473] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.179519] pci 0000:00:1f.5: PME# disabled
[ 0.179597] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
[ 0.179603] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.179622] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfd000000-0xfd00ffff]
[ 0.179681] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
[ 0.179686] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.179717] pci 0000:02:01.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
[ 0.179727] pci 0000:02:01.0: reg 18 io port: [0xbc00-0xbc1f]
[ 0.179756] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.179802] pci 0000:02:01.0: PME# disabled
[ 0.179881] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff]
[ 0.179886] pci 0000:00:03.0: bridge 32bit mmio: [0xfe000000-0xfe0fffff]
[ 0.179927] pci 0000:03:01.0: reg 10 32bit mmio pref: [0xf8001000-0xf8001fff]
[ 0.180016] pci 0000:03:01.1: reg 10 32bit mmio pref: [0xf8000000-0xf8000fff]
[ 0.180111] pci 0000:03:07.0: reg 10 32bit mmio: [0xfe100000-0xfe100fff]
[ 0.180151] pci 0000:03:07.0: supports D1 D2
[ 0.180154] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.180199] pci 0000:03:07.0: PME# disabled
[ 0.180278] pci 0000:00:1e.0: transparent bridge
[ 0.180325] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[ 0.180331] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf8000000-0xf80fffff]
[ 0.180345] pci_bus 0000:00: on NUMA node 0
[ 0.180351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.180484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.180535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.183954] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.184548] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.185162] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.186513] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.187124] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.187803] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.188512] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.189127] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.189743] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.189798] vgaarb: loaded
[ 0.189924] PCI: Using ACPI for IRQ routing
[ 0.190241] hpet clockevent registered
[ 0.190245] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.190293] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.190469] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.196014] Switching to clocksource tsc
[ 0.197714] pnp: PnP ACPI init
[ 0.197780] ACPI: bus type pnp registered
[ 0.201844] pnp: PnP ACPI: found 13 devices
[ 0.201888] ACPI: ACPI bus type pnp unregistered
[ 0.201933] PnPBIOS: Disabled by ACPI PNP
[ 0.201991] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.202041] system 00:0b: ioport range 0x400-0x47f has been reserved
[ 0.202086] system 00:0b: ioport range 0x680-0x6ff has been reserved
[ 0.202131] system 00:0b: ioport range 0x500-0x53f has been reserved
[ 0.202177] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.202227] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.202273] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.202323] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.202369] system 00:0c: iomem range 0xc0000-0xd7fff could not be reserved
[ 0.202414] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.202459] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.237336] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.237382] pci 0000:00:01.0: IO window: disabled
[ 0.237428] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff
[ 0.237474] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.237522] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.237567] pci 0000:00:03.0: IO window: 0xb000-0xbfff
[ 0.237612] pci 0000:00:03.0: MEM window: 0xfe000000-0xfe0fffff
[ 0.237657] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.237704] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.237748] pci 0000:00:1e.0: IO window: disabled
[ 0.237794] pci 0000:00:1e.0: MEM window: 0xfe100000-0xfe1fffff
[ 0.237840] pci 0000:00:1e.0: PREFETCH window: 0xf8000000-0xf80fffff
[ 0.237902] pci 0000:00:1e.0: setting latency timer to 64
[ 0.237908] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.237911] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.237915] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff]
[ 0.237918] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.237922] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.237925] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe0fffff]
[ 0.237929] pci_bus 0000:03: resource 1 mem: [0xfe100000-0xfe1fffff]
[ 0.237932] pci_bus 0000:03: resource 2 pref mem [0xf8000000-0xf80fffff]
[ 0.237936] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.237939] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.237978] NET: Registered protocol family 2
[ 0.238132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.238585] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.239169] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239660] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239709] TCP reno registered
[ 0.239876] NET: Registered protocol family 1
[ 0.240051] pci 0000:01:00.0: Boot video device
[ 0.240126] Unpacking initramfs...
[ 0.534508] Freeing initrd memory: 8841k freed
[ 0.542148] audit: initializing netlink socket (disabled)
[ 0.542208] type=2000 audit(1270061897.539:1): initialized
[ 0.542447] highmem bounce pool size: 64 pages
[ 0.542494] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.544280] VFS: Disk quotas dquot_6.5.2
[ 0.544395] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.544527] msgmni has been set to 1739
[ 0.544794] alg: No test for stdrng (krng)
[ 0.544900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.544951] io scheduler noop registered
[ 0.544993] io scheduler anticipatory registered
[ 0.545036] io scheduler deadline registered
[ 0.545122] io scheduler cfq registered (default)
[ 0.545384] isapnp: Scanning for PnP cards...
[ 0.899029] isapnp: No Plug & Play device found
[ 0.900784] Linux agpgart interface v0.103
[ 0.900933] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 0.909376] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.909521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.909655] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.910050] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.910283] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.910328] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.911432] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.911575] mice: PS/2 mouse device common for all mice
[ 0.911670] rtc_cmos 00:02: RTC can wake from S4
[ 0.911762] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.911826] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.911888] cpuidle: using governor ladder
[ 0.911931] cpuidle: using governor menu
[ 0.911975] No iBFT detected.
[ 0.912502] TCP cubic registered
[ 0.912691] NET: Registered protocol family 10
[ 0.913362] lo: Disabled Privacy Extensions
[ 0.913869] Mobile IPv6
[ 0.913912] NET: Registered protocol family 17
[ 0.913970] Using IPI No-Shortcut mode
[ 0.914108] PM: Resume from disk failed.
[ 0.914115] registered taskstats version 1
[ 0.914445] rtc_cmos 00:02: setting system clock to 2010-03-31 18:58:18 UTC (1270061898)
[ 0.914560] Freeing unused kernel memory: 372k freed
[ 0.914908] Write protecting the kernel text: 2472k
[ 0.914979] Write protecting the kernel read-only data: 908k
[ 0.937690] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.049344] device-mapper: uevent: version 1.0.3
[ 1.049555] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.173106] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.173188] ACPI: Sleep Button [SLPB]
[ 1.173356] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.173419] ACPI: Power Button [PWRF]
[ 1.274308] usbcore: registered new interface driver usbfs
[ 1.274604] usbcore: registered new interface driver hub
[ 1.274852] usbcore: registered new device driver usb
[ 1.296910] SCSI subsystem initialized
[ 1.326372] libata version 3.00 loaded.
[ 1.331335] ata_piix 0000:00:1f.1: version 2.13
[ 1.331363] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.331453] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.331603] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.335589] scsi0 : ata_piix
[ 1.335913] scsi1 : ata_piix
[ 1.338789] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.338842] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.338928] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.338982] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.339245] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.339480] scsi2 : ata_piix
[ 1.339750] scsi3 : ata_piix
[ 1.341444] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[ 1.341496] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[ 1.342359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.342457] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.342534] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.342540] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.342620] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.342709] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.346637] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 1.346779] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe200000
[ 1.350878] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.350931] Copyright (c) 1999-2006 Intel Corporation.
[ 1.351025] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.351082] e1000 0000:02:01.0: setting latency timer to 64
[ 1.352289] Floppy drive(s): fd0 is 1.44M
[ 1.358039] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.360025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.360112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.360157] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.360207] usb usb1: Product: EHCI Host Controller
[ 1.360250] usb usb1: Manufacturer: Linux 2.6.32-4-686 ehci_hcd
[ 1.360294] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.360445] usb usb1: configuration #1 chosen from 1 choice
[ 1.360549] hub 1-0:1.0: USB hub found
[ 1.360608] hub 1-0:1.0: 8 ports detected
[ 1.360794] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.360864] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.360870] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.360936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.361032] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[ 1.361115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.361160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.361210] usb usb2: Product: UHCI Host Controller
[ 1.361253] usb usb2: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.361296] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.361442] usb usb2: configuration #1 chosen from 1 choice
[ 1.361544] hub 2-0:1.0: USB hub found
[ 1.361601] hub 2-0:1.0: 2 ports detected
[ 1.361756] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.361817] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.361823] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.361890] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.361976] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 1.362059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.362105] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.362154] usb usb3: Product: UHCI Host Controller
[ 1.362197] usb usb3: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.362240] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.363089] usb usb3: configuration #1 chosen from 1 choice
[ 1.363194] hub 3-0:1.0: USB hub found
[ 1.363255] hub 3-0:1.0: 2 ports detected
[ 1.363364] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.363415] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.363419] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.363470] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.363540] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 1.363621] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.363666] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.363715] usb usb4: Product: UHCI Host Controller
[ 1.363758] usb usb4: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.363802] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.363931] usb usb4: configuration #1 chosen from 1 choice
[ 1.364072] hub 4-0:1.0: USB hub found
[ 1.364140] hub 4-0:1.0: 2 ports detected
[ 1.364249] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.364299] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.364303] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.364354] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.364425] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 1.364502] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.364548] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.364597] usb usb5: Product: UHCI Host Controller
[ 1.364640] usb usb5: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.364684] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.364817] usb usb5: configuration #1 chosen from 1 choice
[ 1.364917] hub 5-0:1.0: USB hub found
[ 1.364971] hub 5-0:1.0: 2 ports detected
[ 1.370797] FDC 0 is a National Semiconductor PC87306
[ 1.507045] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:87:fe:83
[ 1.514172] ata1.00: ATA-5: WDC WD1200JB-00CRA1, 17.07W17, max UDMA/100
[ 1.514218] ata1.00: 234441648 sectors, multi 16: LBA
[ 1.514298] ata1.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.16, max UDMA/33
[ 1.529048] ata1.00: configured for UDMA/100
[ 1.544219] ata1.01: configured for UDMA/33
[ 1.544973] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-00C 17.0 PQ: 0 ANSI: 5
[ 1.565606] ata4.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[ 1.565672] ata4.00: 234441648 sectors, multi 16: LBA48
[ 1.565691] ata3.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
[ 1.565696] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.580635] ata4.00: configured for UDMA/133
[ 1.580655] ata3.00: configured for UDMA/133
[ 1.625360] ata2.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100
[ 1.625408] ata2.00: 234441648 sectors, multi 16: LBA48
[ 1.625488] ata2.01: ATAPI: SONY DVD RW DW-D22A, BYS1, max UDMA/66
[ 1.641330] ata2.00: configured for UDMA/100
[ 1.656177] ata2.01: configured for UDMA/66
[ 1.728012] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.770630] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.862389] usb 1-4: New USB device found, idVendor=058f, idProduct=6362
[ 1.862439] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.862485] usb 1-4: Product: Mass Storage Device
[ 1.862529] usb 1-4: Manufacturer: Generic
[ 1.862572] usb 1-4: SerialNumber: 058F312D81B
[ 1.862715] usb 1-4: configuration #1 chosen from 1 choice
[ 2.100011] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.281897] usb 2-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.281944] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.281989] usb 2-1: Product: Microsoft Wheel Mouse Optical®
[ 2.282032] usb 2-1: Manufacturer: Microsoft
[ 2.282222] usb 2-1: configuration #1 chosen from 1 choice
[ 22.816020] ata1: lost interrupt (Status 0x58)
[ 22.820001] ata1: drained 32768 bytes to clear DRQ.
[ 22.879175] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 22.879229] scsi 0:0:1:0: CDB: Inquiry: 12 00 00 00 60 00
[ 22.879588] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[ 22.879590] res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 22.879682] ata1.01: status: { DRDY }
[ 22.879749] ata1: soft resetting link
[ 23.069076] ata1.00: configured for UDMA/100
[ 23.084233] ata1.01: configured for UDMA/33
[ 23.084464] ata1: EH complete
[ 43.816017] ata1: lost interrupt (Status 0x58)
[ 43.820001] ata1: drained 32768 bytes to clear DRQ.
[ 43.879169] ata1.01: limiting speed to UDMA/25:PIO4
[ 43.879214] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 43.879260] scsi 0:0:1:0: CDB: Inquiry: 12 00 00 00 60 00
[ 43.879605] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[ 43.879607] res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 43.879698] ata1.01: status: { DRDY }
[ 43.879764] ata1: soft resetting link
[ 44.065069] ata1.00: configured for UDMA/100
[ 44.080222] ata1.01: configured for UDMA/25
[ 44.080438] ata1: EH complete
[ 64.816018] ata1: lost interrupt (Status 0x58)
[ 64.820002] ata1: drained 32768 bytes to clear DRQ.
[ 64.879169] ata1.01: limiting speed to PIO4
[ 64.879213] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 64.879258] scsi 0:0:1:0: CDB: Inquiry: 12 00 00 00 60 00
[ 64.879603] ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 dma 96 in
[ 64.879605] res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[ 64.879696] ata1.01: status: { DRDY }
[ 64.879760] ata1: soft resetting link
[ 65.065050] ata1.00: configured for UDMA/100
[ 65.072239] ata1.01: configured for PIO4
[ 65.072454] ata1: EH complete
[ 65.072945] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16 PQ: 0 ANSI: 5
[ 65.073301] scsi 1:0:0:0: Direct-Access ATA WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5
[ 65.074329] scsi 1:0:1:0: CD-ROM SONY DVD RW DW-D22A BYS1 PQ: 0 ANSI: 5
[ 65.074640] scsi 2:0:0:0: Direct-Access ATA ST3120026AS 3.05 PQ: 0 ANSI: 5
[ 65.074970] scsi 3:0:0:0: Direct-Access ATA ST3120026AS 3.05 PQ: 0 ANSI: 5
[ 65.077684] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 65.100980] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 65.101160] sd 0:0:0:0: [sda] Write Protect is off
[ 65.101209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 65.101248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.101522] sda:
[ 65.106548] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 65.106715] sd 1:0:0:0: [sdb] Write Protect is off
[ 65.106764] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 65.106802] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.107058] sdb:
[ 65.107302] sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 65.107462] sd 2:0:0:0: [sdc] Write Protect is off
[ 65.107510] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 65.107547] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.107800] sdc:
[ 65.108034] sd 3:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 65.108196] sd 3:0:0:0: [sdd] Write Protect is off
[ 65.108244] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 65.108281] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 65.108532] sdd: sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4
[ 65.124498] sdb1 sdb2 sdb3 sdb4 <sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 65.125431] Uniform CD-ROM driver Revision: 3.20
[ 65.125651] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 65.126015] sd 0:0:0:0: [sda] Attached SCSI disk
[ 65.127079] Initializing USB Mass Storage driver...
[ 65.127271] scsi4 : SCSI emulation for USB Mass Storage devices
[ 65.127482] usb-storage: device found at 3
[ 65.127486] usb-storage: waiting for device to settle before scanning
[ 65.127511] usbcore: registered new interface driver usb-storage
[ 65.127609] USB Mass Storage support registered.
[ 65.128059] sdd1 sdd2 sdd3 sdd4 < sdc5 sdc6 sdd5 sdb5 sdd6 sdc7
[ 65.149013] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI version 1.0
[ 65.153939] sdd7 sdc8 sdd8 sdb6 sdc9 sdd9 sdc10 sdb7 sdd10 sdc11 sdd11 sdb8sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 65.195434] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 65.196905] sdc12 sdd12 sdb9 sdd13 sdc13 sdb10 sdd14 sdc14 sdb11 sdd15 >
[ 65.229134] sdc15 >
[ 65.229926] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 65.230647] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 65.239651] sdb12 sdb13 sdb14 sdb15 >
[ 65.288413] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 65.300554] usbcore: registered new interface driver hiddev
[ 65.314761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 65.316047] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 65.316278] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-1/input0
[ 65.316352] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 65.316399] usbcore: registered new interface driver usbhid
[ 65.316406] usbhid: v2.6:USB HID core driver
[ 65.316832] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 65.316949] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 65.317110] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 65.318295] sd 3:0:0:0: Attached scsi generic sg5 type 0
[ 65.648418] firewire_core: created device fw0: GUID 0007e9000087fe83, S400
[ 66.406419] md: raid0 personality registered for level 0
[ 66.867949] md: md1 stopped.
[ 66.870149] md: bind<sdd2>
[ 66.870566] md: bind<sdc2>
[ 66.873942] raid0: looking at sdc2
[ 66.873992] raid0: comparing sdc2(786944)
[ 66.874034] with sdc2(786944)
[ 66.874872] raid0: END
[ 66.874916] raid0: ==> UNIQUE
[ 66.874960] raid0: 1 zones
[ 66.875005] raid0: looking at sdd2
[ 66.875051] raid0: comparing sdd2(786944)
[ 66.875092] with sdc2(786944)
[ 66.875175] raid0: EQUAL
[ 66.875219] raid0: FINAL 1 zones
[ 66.875263] raid0: done.
[ 66.875310] raid0 : md_size is 1573888 sectors.
[ 66.875356] ******* md1 configuration *********
[ 66.875401] zone0=[sdc2/sdd2/]
[ 66.875554] zone offset=0kb device offset=0kb size=786944kb
[ 66.875598] **********************************
[ 66.875600]
[ 66.875702] md1: detected capacity change from 0 to 805830656
[ 66.881346] md1: unknown partition table
[ 67.131172] md: md2 stopped.
[ 67.133304] md: bind<sdd3>
[ 67.133725] md: bind<sdc3>
[ 67.137092] raid0: looking at sdc3
[ 67.137143] raid0: comparing sdc3(979712)
[ 67.137185] with sdc3(979712)
[ 67.137266] raid0: END
[ 67.137309] raid0: ==> UNIQUE
[ 67.137354] raid0: 1 zones
[ 67.137398] raid0: looking at sdd3
[ 67.137443] raid0: comparing sdd3(979712)
[ 67.137485] with sdc3(979712)
[ 67.137569] raid0: EQUAL
[ 67.137613] raid0: FINAL 1 zones
[ 67.137659] raid0: done.
[ 67.137703] raid0 : md_size is 1959424 sectors.
[ 67.137749] ******* md2 configuration *********
[ 67.137796] zone0=[sdc3/sdd3/]
[ 67.137949] zone offset=0kb device offset=0kb size=979712kb
[ 67.137993] **********************************
[ 67.137994]
[ 67.138087] md2: detected capacity change from 0 to 1003225088
[ 67.147517] md2: unknown partition table
[ 67.397378] md: md3 stopped.
[ 67.399242] md: bind<sdd5>
[ 67.400186] md: bind<sdc5>
[ 67.403734] raid0: looking at sdc5
[ 67.403781] raid0: comparing sdc5(23438592)
[ 67.403819] with sdc5(23438592)
[ 67.403897] raid0: END
[ 67.403938] raid0: ==> UNIQUE
[ 67.403979] raid0: 1 zones
[ 67.404036] raid0: looking at sdd5
[ 67.404079] raid0: comparing sdd5(23438592)
[ 67.404117] with sdc5(23438592)
[ 67.404195] raid0: EQUAL
[ 67.404235] raid0: FINAL 1 zones
[ 67.404279] raid0: done.
[ 67.404320] raid0 : md_size is 46877184 sectors.
[ 67.404362] ******* md3 configuration *********
[ 67.404404] zone0=[sdc5/sdd5/]
[ 67.404545] zone offset=0kb device offset=0kb size=23438592kb
[ 67.404589] **********************************
[ 67.404590]
[ 67.404689] md3: detected capacity change from 0 to 24001118208
[ 67.410279] md3: unknown partition table
[ 67.655786] md: md4 stopped.
[ 67.657864] md: bind<sdd6>
[ 67.658261] md: bind<sdc6>
[ 67.661576] raid0: looking at sdc6
[ 67.661626] raid0: comparing sdc6(23438592)
[ 67.661667] with sdc6(23438592)
[ 67.661752] raid0: END
[ 67.661796] raid0: ==> UNIQUE
[ 67.661840] raid0: 1 zones
[ 67.661884] raid0: looking at sdd6
[ 67.661929] raid0: comparing sdd6(23438592)
[ 67.661971] with sdc6(23438592)
[ 67.662055] raid0: EQUAL
[ 67.662099] raid0: FINAL 1 zones
[ 67.662145] raid0: done.
[ 67.662189] raid0 : md_size is 46877184 sectors.
[ 67.662235] ******* md4 configuration *********
[ 67.662281] zone0=[sdc6/sdd6/]
[ 67.662505] zone offset=0kb device offset=0kb size=23438592kb
[ 67.662549] **********************************
[ 67.662550]
[ 67.662643] md4: detected capacity change from 0 to 24001118208
[ 67.664644] md4: unknown partition table
[ 67.897045] md: md5 stopped.
[ 67.899184] md: bind<sdd7>
[ 67.899580] md: bind<sdc7>
[ 67.902843] raid0: looking at sdc7
[ 67.902890] raid0: comparing sdc7(23438592)
[ 67.902929] with sdc7(23438592)
[ 67.903007] raid0: END
[ 67.903047] raid0: ==> UNIQUE
[ 67.903088] raid0: 1 zones
[ 67.903129] raid0: looking at sdd7
[ 67.903171] raid0: comparing sdd7(23438592)
[ 67.903209] with sdc7(23438592)
[ 67.903287] raid0: EQUAL
[ 67.903328] raid0: FINAL 1 zones
[ 67.903371] raid0: done.
[ 67.903412] raid0 : md_size is 46877184 sectors.
[ 67.903455] ******* md5 configuration *********
[ 67.903497] zone0=[sdc7/sdd7/]
[ 67.903638] zone offset=0kb device offset=0kb size=23438592kb
[ 67.903682] **********************************
[ 67.903683]
[ 67.903775] md5: detected capacity change from 0 to 24001118208
[ 67.909064] md5: unknown partition table
[ 68.146704] md: md6 stopped.
[ 68.148817] md: bind<sdd8>
[ 68.149228] md: bind<sdc8>
[ 68.152815] raid0: looking at sdc8
[ 68.152866] raid0: comparing sdc8(23438592)
[ 68.152908] with sdc8(23438592)
[ 68.152991] raid0: END
[ 68.153039] raid0: ==> UNIQUE
[ 68.153084] raid0: 1 zones
[ 68.153127] raid0: looking at sdd8
[ 68.153172] raid0: comparing sdd8(23438592)
[ 68.153213] with sdc8(23438592)
[ 68.153409] raid0: EQUAL
[ 68.153466] raid0: FINAL 1 zones
[ 68.153520] raid0: done.
[ 68.153567] raid0 : md_size is 46877184 sectors.
[ 68.153619] ******* md6 configuration *********
[ 68.153664] zone0=[sdc8/sdd8/]
[ 68.153834] zone offset=0kb device offset=0kb size=23438592kb
[ 68.153890] **********************************
[ 68.153892]
[ 68.154001] md6: detected capacity change from 0 to 24001118208
[ 68.158316] md6: unknown partition table
[ 68.405154] md: md7 stopped.
[ 68.426664] md: bind<sdd9>
[ 68.427089] md: bind<sdc9>
[ 68.428881] raid0: looking at sdc9
[ 68.428928] raid0: comparing sdc9(23438592)
[ 68.428966] with sdc9(23438592)
[ 68.429048] raid0: END
[ 68.429088] raid0: ==> UNIQUE
[ 68.429129] raid0: 1 zones
[ 68.429171] raid0: looking at sdd9
[ 68.429212] raid0: comparing sdd9(23438592)
[ 68.429250] with sdc9(23438592)
[ 68.429328] raid0: EQUAL
[ 68.429368] raid0: FINAL 1 zones
[ 68.429411] raid0: done.
[ 68.429452] raid0 : md_size is 46877184 sectors.
[ 68.429495] ******* md7 configuration *********
[ 68.429537] zone0=[sdc9/sdd9/]
[ 68.429678] zone offset=0kb device offset=0kb size=23438592kb
[ 68.429721] **********************************
[ 68.429723]
[ 68.429815] md7: detected capacity change from 0 to 24001118208
[ 68.434295] md7: unknown partition table
[ 68.688188] md: md8 stopped.
[ 68.692447] md: bind<sdd10>
[ 68.692851] md: bind<sdc10>
[ 68.694702] raid0: looking at sdc10
[ 68.694749] raid0: comparing sdc10(23438592)
[ 68.694788] with sdc10(23438592)
[ 68.694866] raid0: END
[ 68.694906] raid0: ==> UNIQUE
[ 68.694947] raid0: 1 zones
[ 68.694988] raid0: looking at sdd10
[ 68.695030] raid0: comparing sdd10(23438592)
[ 68.695068] with sdc10(23438592)
[ 68.695146] raid0: EQUAL
[ 68.695186] raid0: FINAL 1 zones
[ 68.695229] raid0: done.
[ 68.695270] raid0 : md_size is 46877184 sectors.
[ 68.695313] ******* md8 configuration *********
[ 68.696118] zone0=[sdc10/sdd10/]
[ 68.696260] zone offset=0kb device offset=0kb size=23438592kb
[ 68.696303] **********************************
[ 68.696305]
[ 68.696397] md8: detected capacity change from 0 to 24001118208
[ 68.698603] md8: unknown partition table
[ 68.962924] md: md9 stopped.
[ 68.984944] md: bind<sdd11>
[ 68.985361] md: bind<sdc11>
[ 68.987127] raid0: looking at sdc11
[ 68.987174] raid0: comparing sdc11(23438592)
[ 68.987212] with sdc11(23438592)
[ 68.987290] raid0: END
[ 68.987331] raid0: ==> UNIQUE
[ 68.987372] raid0: 1 zones
[ 68.987413] raid0: looking at sdd11
[ 68.987455] raid0: comparing sdd11(23438592)
[ 68.987493] with sdc11(23438592)
[ 68.987571] raid0: EQUAL
[ 68.987612] raid0: FINAL 1 zones
[ 68.987656] raid0: done.
[ 68.987697] raid0 : md_size is 46877184 sectors.
[ 68.987740] ******* md9 configuration *********
[ 68.987782] zone0=[sdc11/sdd11/]
[ 68.987923] zone offset=0kb device offset=0kb size=23438592kb
[ 68.987967] **********************************
[ 68.987968]
[ 68.988088] md9: detected capacity change from 0 to 24001118208
[ 68.994299] md9: unknown partition table
[ 69.245976] md: md10 stopped.
[ 69.268981] md: bind<sdd12>
[ 69.269377] md: bind<sdc12>
[ 69.271167] raid0: looking at sdc12
[ 69.271214] raid0: comparing sdc12(23438592)
[ 69.271253] with sdc12(23438592)
[ 69.271331] raid0: END
[ 69.271371] raid0: ==> UNIQUE
[ 69.271412] raid0: 1 zones
[ 69.271453] raid0: looking at sdd12
[ 69.271496] raid0: comparing sdd12(23438592)
[ 69.271534] with sdc12(23438592)
[ 69.271612] raid0: EQUAL
[ 69.271652] raid0: FINAL 1 zones
[ 69.271696] raid0: done.
[ 69.271737] raid0 : md_size is 46877184 sectors.
[ 69.271780] ******* md10 configuration *********
[ 69.271822] zone0=[sdc12/sdd12/]
[ 69.271964] zone offset=0kb device offset=0kb size=23438592kb
[ 69.272022] **********************************
[ 69.272023]
[ 69.272117] md10: detected capacity change from 0 to 24001118208
[ 69.274422] md10: unknown partition table
[ 69.339201] PM: Starting manual resume from disk
[ 69.339246] PM: Resume from partition 9:2
[ 69.339249] PM: Checking hibernation image.
[ 69.339586] PM: Error -22 checking image file
[ 69.339589] PM: Resume from disk failed.
[ 69.354900] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 69.356224] SGI XFS Quota Management subsystem
[ 69.357997] Filesystem "md4": Disabling barriers, trial barrier write failed
[ 69.374733] XFS mounting filesystem md4
[ 69.518769] Ending clean XFS mount for filesystem: md4
[ 70.124179] usb-storage: device scan complete
[ 70.124795] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 70.125416] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 70.126040] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 70.126664] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 70.127190] sd 4:0:0:0: Attached scsi generic sg6 type 0
[ 70.127389] sd 4:0:0:1: Attached scsi generic sg7 type 0
[ 70.127579] sd 4:0:0:2: Attached scsi generic sg8 type 0
[ 70.127767] sd 4:0:0:3: Attached scsi generic sg9 type 0
[ 70.131909] sd 4:0:0:0: [sde] Attached SCSI removable disk
[ 70.132656] sd 4:0:0:1: [sdf] Attached SCSI removable disk
[ 70.133407] sd 4:0:0:2: [sdg] Attached SCSI removable disk
[ 70.134151] sd 4:0:0:3: [sdh] Attached SCSI removable disk
[ 71.055426] udev: starting version 151
[ 71.935952] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 71.938090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 72.085538] intel_rng: Firmware space is locked read-only. If you can't or
[ 72.085541] intel_rng: don't want to disable this in firmware setup, and if
[ 72.085543] intel_rng: you are certain that your system has a functional
[ 72.085545] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 72.092778] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 72.109558] processor LNXCPU:00: registered as cooling_device0
[ 72.114075] processor LNXCPU:01: registered as cooling_device1
[ 72.487601] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 74.046900] nvidia: module license 'NVIDIA' taints kernel.
[ 74.046950] Disabling lock debugging due to kernel taint
[ 75.121611] parport_pc 00:08: reported by Plug and Play ACPI
[ 75.121731] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 75.123193] NVRM: The NVIDIA GeForce DDR GPU installed in this system is
[ 75.123196] NVRM: supported through the NVIDIA 71.86.xx Legacy drivers. Please
[ 75.123199] NVRM: visit http://www.nvidia.com/object/unix.html for more
[ 75.123201] NVRM: information. The 190.53 NVIDIA driver will ignore
[ 75.123203] NVRM: this GPU. Continuing probe...
[ 75.123444] NVRM: No NVIDIA graphics adapter found!
[ 75.216585] Bt87x 0000:03:01.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 75.216980] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 75.286813] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 75.286948] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 75.301033] Error: Driver 'pcspkr' is already registered, aborting...
[ 75.351879] Linux video capture interface: v2.00
[ 75.392850] bttv: driver version 0.9.18 loaded
[ 75.392905] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 75.393598] bttv: Bt8xx card found (0).
[ 75.393667] bttv 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 75.393733] bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 22, latency: 32, mmio: 0xf8001000
[ 75.393904] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[ 75.393967] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
[ 75.394028] IRQ 22/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 75.394115] bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
[ 75.394296] bttv0: tuner type=5
[ 75.454200] bttv0: audio absent, no audio device found!
[ 75.472400] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 75.513785] tuner-simple 1-0061: creating new instance
[ 75.513846] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 75.514775] bttv0: registered device video0
[ 75.515005] bttv0: registered device vbi0
[ 75.515200] bttv0: registered device radio0
[ 75.515268] bttv0: PLL: 28636363 => 35468950 .. ok
[ 75.548744] input: bttv IR (card=34) as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/input/input5
[ 75.708016] intel8x0_measure_ac97_clock: measured 52133 usecs (2512 samples)
[ 75.708065] intel8x0: clocking to 48000
[ 78.450768] Adding 979704k swap on /dev/md2. Priority:-1 extents:1 across:979704k
[ 78.512037] Filesystem "md4": Disabling barriers, trial barrier write failed
[ 78.685131] loop: module loaded
[ 80.288721] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.292410] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 80.292738] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 80.577251] fuse init (API version 7.13)
[ 86.623981] [drm] Initialized drm 1.1.0 20060810
[ 86.697282] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 86.701169] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x010100a3)
[ 86.701246] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 86.895751] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 86.895926] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 86.895930] [drm] nouveau 0000:01:00.0: BMP version 5.1
[ 86.895933] [drm] nouveau 0000:01:00.0: Bios version 02.10.03.00
[ 86.895937] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.1
[ 86.895940] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
[ 86.895943] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1
[ 86.899904] [drm] nouveau 0000:01:00.0: No TV encoders found.
[ 86.900082] [drm] nouveau 0000:01:00.0: Could not find a compatible set of PLL values
[ 86.900088] [drm] nouveau 0000:01:00.0: ======= misaligned reg 0x44206563 =======
[ 86.900091] [drm] nouveau 0000:01:00.0: === reg 0x44206563 out of mapped bounds ===
[ 86.900095] [drm] nouveau 0000:01:00.0: === reg 0x56205244 out of mapped bounds ===
[ 86.900098] [drm] nouveau 0000:01:00.0: ======= misaligned reg 0x42204147 =======
[ 86.900101] [drm] nouveau 0000:01:00.0: === reg 0x42204147 out of mapped bounds ===
[ 86.900104] [drm] nouveau 0000:01:00.0: ======= misaligned reg 0x0D534F49 =======
[ 86.900106] [drm] nouveau 0000:01:00.0: === reg 0x0d534f49 out of mapped bounds ===
[ 86.900109] [drm] nouveau 0000:01:00.0: ======= misaligned reg 0x0010000A =======
[ 86.907120] [TTM] Zone kernel: Available graphics memory: 445578 kiB.
[ 86.907124] [TTM] Zone highmem: Available graphics memory: 516334 kiB.
[ 86.907137] [drm] nouveau 0000:01:00.0: 32 MiB VRAM
[ 86.907197] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 86.907213] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 86.907221] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 86.907266] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 86.907294] [drm] nouveau 0000:01:00.0: 256 MiB GART (aperture)
[ 86.907536] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 86.907942] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 86.907960] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 86.950828] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 86.951515] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 87.063481] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x45000, bo f61f8c00
[ 87.063498] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: PROTECTION_FAULT
[ 87.063512] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 0/4 Class 0x009f Mthd 0x019c Data 0x00001187:0x00001187
[ 87.063523] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - nSource: ILLEGAL_MTHD, nStatus: PROTECTION_FAULT
[ 87.063533] [drm] nouveau 0000:01:00.0: PGRAPH_ERROR - Ch 0/4 Class 0x009f Mthd 0x02fc Data 0x8000000c:0x00000003
[ 87.063954] Console: switching to colour frame buffer device 128x48
[ 87.063971] fb0: nouveaufb frame buffer device
[ 87.063975] registered panic notifier
[ 87.063985] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 87.302388] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 87.302721] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 87.365098] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 87.502117] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 87.502125] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
[ 91.104011] eth0: no IPv6 routers present
[ 107.198981] CPU0 attaching NULL sched-domain.
[ 107.198988] CPU1 attaching NULL sched-domain.
[ 107.224053] CPU0 attaching sched-domain:
[ 107.224058] domain 0: span 0-1 level SIBLING
[ 107.224062] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 107.224069] domain 1: span 0-1 level MC
[ 107.224073] groups: 0-1 (cpu_power = 1178)
[ 107.224079] CPU1 attaching sched-domain:
[ 107.224081] domain 0: span 0-1 level SIBLING
[ 107.224085] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 107.224091] domain 1: span 0-1 level MC
[ 107.224094] groups: 0-1 (cpu_power = 1178)
please forward to anyone at debian-boot that is interested...
vvill
Reply to: