Bug#536011: marked as done (xserver-xorg-video-intel: Display corruption and X crashes after a dist-upgrade that didn't touch any X related package.)

To: Cyril Brulebois <kibi@debian.org>
Subject: Bug#536011: marked as done (xserver-xorg-video-intel: Display corruption and X crashes after a dist-upgrade that didn't touch any X related package.)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Sun, 28 Feb 2010 17:57:08 +0000
Message-id: <[🔎] handler.536011.D536011.126737976611738.ackdone@bugs.debian.org>
References: <20100228175700.GS3295@debian.org> <20090706191552.5961.58516.reportbug@haplo.sliepen.oi>

Your message dated Sun, 28 Feb 2010 18:57:00 +0100
with message-id <20100228175700.GS3295@debian.org>
and subject line Re: Bug#536011:
has caused the Debian Bug report #536011,
regarding xserver-xorg-video-intel: Display corruption and X crashes after a dist-upgrade that didn't touch any X related package.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
536011: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=536011
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: xserver-xorg-video-intel: Display corruption and X crashes after a dist-upgrade that didn't touch any X related package.
From: Guus Sliepen <guus@debian.org>
Date: Mon, 06 Jul 2009 21:15:52 +0200
Message-id: <20090706191552.5961.58516.reportbug@haplo.sliepen.oi>

Package: xserver-xorg-video-intel
Version: 2:2.7.1-1
Severity: important

After dist-upgrading several machines, I got display corruption and occasional
hangs and crashes on two machines that have Intel graphics chips. The two
machines, an EeePC 901 and a Shuttle X50, run Debian unstable, without
experimental packages. The 901 has an Atom N270 chip, which is single core, 32
bit. The X50 has an Atom 330, which is a dual core, 64 bit processor. One has a
GNOME desktop, the other an XFCE4 desktop. Both have recent kernels with KMS
enabled, but corruption seems to happen with 2.6.29.2, 2.6.29.4 and 2.6.30.1 in
exactly the same way.

The symptoms are similar: startup via gdm or slim seem to work OK. Desktop
appears normally. Starting a GNOME terminal or using the panel menus seems to
work OK. Starting an xterm causes immediate corruption: black lines with
occasional white pixels appear across the entire screen, fonts are unreadable.
After a some time, even when doing nothing after logging in, X hangs or
crashes. If X restarts, corruption sometimes also happens during the start of
gdm or slim, but never after a hard reset. Trying to start programs makes
crashes happen quicker.

As mentioned in the subject, one of the machines dist-upgraded both on the 4th
of July and on the 6th (today); only after today's upgrade did the corruption
happen. Between the two upgrades, the machine was turned on and off a number of
times, so it could not have been from an earlier upgrade that did not fully
take effect because old versions of programs/libraries were still in use. The
packages touched in the last upgrade of that specific machine were:

gnome-desktop-environment gnome gnome-core libc6-i386 libc6-dev libc6
libbrasero-media0 brasero-common libgnome-bluetooth2 brasero libmono0
libmono-corlib2.0-cil gnome-bluetooth mono-runtime mono-gac mono-2.0-gac
libmono-system2.0-cil libmono-security2.0-cil libglib2.0-cil cli-common
libmono-cairo2.0-cil libgtk2.0-cil libgnome-vfs2.0-cil libgmime2.2a-cil
libgmime-2.0-2a libglade2.0-cil libgconf2.0-cil libart2.0-cil tomboy
libndesk-dbus1.0-cil libndesk-dbus-glib1.0-cil libmono-sharpzip2.84-cil
libmono-posix2.0-cil libmono-addins0.2-cil libmono-addins-gui0.2-cil
libgnomepanel2.24-cil libgnome2.24-cil debianutils pciutils netbase libpci3
libgcrypt11 locales console-setup binfmt-support libmono-i18n-west2.0-cil
libglib-perl libfuse2 libcdio10 libcdio-paranoia0 libcdio-cdda0 gdb
openbsd-inetd

If you want me to do any tests, please let me know.

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 mei 23 00:08 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1867152 jun 23 20:29 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:

EeePC 901:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

Shuttle X50:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
Attached.

-- no debconf information

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-trunk-686 i686 Debian
Current Operating System: Linux jarre 2.6.29.2 #1 SMP PREEMPT Mon May 4 18:09:28 CEST 2009 i686
Build Date: 23 June 2009  07:53:39PM
xorg-server 2:1.6.1.901-3 (jcristau@debian.org) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul  6 20:08:22 2009
(II) Loader magic: 0x1dc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27ae:1043:830f Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000dc80/8
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default i810 Device 0"
		Driver	"i810"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default i810 Screen 0"
		Device	"Builtin Default i810 Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default i810 Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.7.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 0.0.2
	ABI class: X.Org Video Driver, version 5.0
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): Resizable framebuffer: available (0 4)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO  Model: 1020  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 19  vert.: 11
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.573 redY: 0.339   greenX: 0.330 greenY: 0.596
(II) intel(0): blueX: 0.142 blueY: 0.103   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 50.4 MHz   Image Size:  195 x 113 mm
(II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 600  v_sync: 600  v_sync_end 619 v_blanking: 625 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  A089SW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006af201000000000
(II) intel(0): 	0112010380130b780afa569256549824
(II) intel(0): 	1a4f5400000001010101010101010101
(II) intel(0): 	010101010101b0130040415819201888
(II) intel(0): 	0301c371000000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004130383953573031205630200a0019
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x600"x60.0   50.40  1024 1048 1184 1344  600 600 619 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x600
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 4194303 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 260 x 152
(EE) config/hal: couldn't initialise context: (null) ((null))
(II) config/hal: Adding input device Asus EeePC extra buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Asus EeePC extra buttons: always reports core events
(**) Asus EeePC extra buttons: Device: "/dev/input/event7"
(II) Asus EeePC extra buttons: Found keys
(II) Asus EeePC extra buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device ETPS/2 Elantech Touchpad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event6"
(II) ETPS/2 Elantech Touchpad: x-axis range 8 - 1144
(II) ETPS/2 Elantech Touchpad: y-axis range 8 - 760
(II) ETPS/2 Elantech Touchpad: device does not report pressure, will use touch data.
(II) ETPS/2 Elantech Touchpad: finger width range 0 - 0
(II) ETPS/2 Elantech Touchpad: buttons: left right middle double triple
(--) ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) filter chain progression: 2.00
(**) ETPS/2 Elantech Touchpad: (accel) filter stage 0: 20.00 ms
(**) ETPS/2 Elantech Touchpad: (accel) set acceleration profile 0
(--) ETPS/2 Elantech Touchpad: touchpad found
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO  Model: 1020  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 19  vert.: 11
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.573 redY: 0.339   greenX: 0.330 greenY: 0.596
(II) intel(0): blueX: 0.142 blueY: 0.103   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 50.4 MHz   Image Size:  195 x 113 mm
(II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 600  v_sync: 600  v_sync_end 619 v_blanking: 625 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  A089SW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006af201000000000
(II) intel(0): 	0112010380130b780afa569256549824
(II) intel(0): 	1a4f5400000001010101010101010101
(II) intel(0): 	010101010101b0130040415819201888
(II) intel(0): 	0301c371000000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004130383953573031205630200a0019
(II) intel(0): EDID vendor "AUO", prod id 4128
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   50.40  1024 1048 1184 1344  600 600 619 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x600"x60.0   50.40  1024 1048 1184 1344  600 600 619 625 -hsync -vsync (37.5 kHz)

Backtrace:
0: /usr/bin/X11/X(xorg_backtrace+0x3b) [0x81313bb]
1: /usr/bin/X11/X(xf86SigHandler+0x51) [0x80c5481]
2: [0xb7fbc400]
3: /usr/lib/libdrm_intel.so.1(drm_intel_bo_alloc_for_render+0x24) [0xb79b7414]
4: /usr/lib/xorg/modules/drivers//intel_drv.so [0xb795bba0]
5: /usr/bin/X11/X(ProcCreatePixmap+0x167) [0x8087937]
6: /usr/bin/X11/X(Dispatch+0x33f) [0x808c59f]
7: /usr/bin/X11/X(main+0x3aa) [0x8071a4a]
8: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7c61775]
9: /usr/bin/X11/X [0x8070f11]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) Asus EeePC extra buttons: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-dsa-amd64 x86_64 Debian
Current Operating System: Linux paithan 2.6.29.4 #3 SMP PREEMPT Thu May 28 11:14:52 CEST 2009 x86_64
Build Date: 23 June 2009  06:28:59PM
xorg-server 2:1.6.1.901-3 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul  6 20:47:10 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(**) |-->Input Device "EETI"
(**) |-->Input Device "Touchscreen"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x3b40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2772:1297:3151 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xfdf00000/524288, 0xd0000000/268435456, 0xfdf80000/262144, I/O @ 0x0000ff00/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.7.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "egalax"
(II) Loading /usr/lib/xorg/modules/input//egalax_drv.so
(II) Module egalax: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.6.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "evtouch"
(II) Loading /usr/lib/xorg/modules/input//evtouch_drv.so
(II) Module evtouch: vendor="Kenan Esau"
	compiled for 1.6.1.901, module version = 0.8.8
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
	965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	Mobile Intel® GM45 Express Chipset,
	Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): Resizable framebuffer: available (0 4)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): Output VGA1 using monitor section Configured Monitor
(II) intel(0): Output LVDS2 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS2
(II) intel(0): Manufacturer: AUO  Model: 10ec  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) intel(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  B156XW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006afec1000000000
(II) intel(0): 	01120103802213780ae6b5a3574f9426
(II) intel(0): 	1e505400000001010101010101010101
(II) intel(0): 	010101010101201c5678500026303020
(II) intel(0): 	340058c1100000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004231353658573031205630200a002a
(II) intel(0): Printing probed modes for output LVDS2
(II) intel(0): Modeline "1366x768"x60.1   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS2 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS2 using initial mode 1366x768
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: -1 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 344 x 193
(**) Option "SendCoreEvents"
(**) egalax: always reports core events
(**) egalax X device name: egalax
(EE) No HID Touch Controller Found!
(EE) No USB Event Touch Controller Found!
(EE) No USB TK Touch Controller Found!
(**) egalaxHistroSize=10
(**) Option "ScreenNo" "0"
(**) egalax associated screen: 0
(**) egalaxParameter=/var/lib/eeti.param
(II) XINPUT: Adding extended input device "egalax" (type: egalax)
State: S_UNTOUCHED	Action: No Action		Button: 0
State: S_TOUCHED	Action: No Action		Button: 0
State: S_LONGTOUCHED	Action: down		Button: 1
State: S_MOVING	Action: No Action		Button: 0
State: S_MAYBETAPPED	Action: click		Button: 1
State: S_ONEANDAHALFTAP	Action: down		Button: 3
(**) Option "MinX" "62"
(**) Option "MaxX" "1966"
(**) Option "MinY" "1910"
(**) Option "MaxY" "45"
(**) Option "DeviceName" "touchscreen"
(**) Option "SendCoreEvents"
(**) touchscreen: always reports core events
(II) XINPUT: Adding extended input device "touchscreen" (type: TOUCHSCREEN)
(**) touchscreen: (accel) keeping acceleration scheme 1
(**) touchscreen: (accel) filter chain progression: 2.00
(**) touchscreen: (accel) filter stage 0: 20.00 ms
(**) touchscreen: (accel) set acceleration profile 0
(EE) xf86OpenSerial: No Device specified.
(WW) touchscreen: cannot open input device
[dix] couldn't enable device 3
(EE) xf86OpenSerial: No Device specified.
(WW) touchscreen: cannot open input device
[dix] couldn't enable device 3
(EE) No HID Touch Controller Found!
(EE) No USB Event Touch Controller Found!
(EE) No HID Touch Controller Found!
(EE) No USB Event Touch Controller Found!
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS2
(II) intel(0): Manufacturer: AUO  Model: 10ec  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) intel(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  B156XW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006afec1000000000
(II) intel(0): 	01120103802213780ae6b5a3574f9426
(II) intel(0): 	1e505400000001010101010101010101
(II) intel(0): 	010101010101201c5678500026303020
(II) intel(0): 	340058c1100000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004231353658573031205630200a002a
(II) intel(0): EDID vendor "AUO", prod id 4332
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): Printing probed modes for output LVDS2
(II) intel(0): Modeline "1366x768"x60.1   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS2
(II) intel(0): Manufacturer: AUO  Model: 10ec  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) intel(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  B156XW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006afec1000000000
(II) intel(0): 	01120103802213780ae6b5a3574f9426
(II) intel(0): 	1e505400000001010101010101010101
(II) intel(0): 	010101010101201c5678500026303020
(II) intel(0): 	340058c1100000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004231353658573031205630200a002a
(II) intel(0): EDID vendor "AUO", prod id 4332
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): Printing probed modes for output LVDS2
(II) intel(0): Modeline "1366x768"x60.1   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS2
(II) intel(0): Manufacturer: AUO  Model: 10ec  Serial#: 0
(II) intel(0): Year: 2008  Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.342   greenX: 0.310 greenY: 0.580
(II) intel(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 72.0 MHz   Image Size:  344 x 193 mm
(II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
(WW) intel(0): Unknown vendor-specific block f
(II) intel(0):  AUO
(II) intel(0):  B156XW01 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0006afec1000000000
(II) intel(0): 	01120103802213780ae6b5a3574f9426
(II) intel(0): 	1e505400000001010101010101010101
(II) intel(0): 	010101010101201c5678500026303020
(II) intel(0): 	340058c1100000180000000f00000000
(II) intel(0): 	00000000000000000020000000fe0041
(II) intel(0): 	554f0a202020202020202020000000fe
(II) intel(0): 	004231353658573031205630200a002a
(II) intel(0): EDID vendor "AUO", prod id 4332
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(II) intel(0): Printing probed modes for output LVDS2
(II) intel(0): Modeline "1366x768"x60.1   72.00  1366 1414 1446 1486  768 771 775 806 -hsync -vsync (48.5 kHz)
(EE) No HID Touch Controller Found!
(EE) No USB Event Touch Controller Found!
(EE) No HID Touch Controller Found!
(EE) No USB Event Touch Controller Found!
(II) config/hal: Adding input device eGalax Inc. USB TouchController
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event3"
(--) eGalax Inc. USB TouchController: no supported touchpad found
(EE) eGalax Inc. USB TouchController Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "eGalax Inc. USB TouchController"
(II) UnloadModule: "synaptics"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) HID Touch Controller @ /dev/usb/hiddev0 
(II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Logitech Logitech BT Mini-Receiver: always reports core events
(**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event5"
(II) Logitech Logitech BT Mini-Receiver: Found keys
(II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device HID 04d9:1101
(**) HID 04d9:1101: always reports core events
(**) HID 04d9:1101: Device: "/dev/input/event4"
(II) HID 04d9:1101: Found 3 mouse buttons
(II) HID 04d9:1101: Found x and y relative axes
(II) HID 04d9:1101: Found scroll wheel(s)
(II) HID 04d9:1101: Found keys
(II) HID 04d9:1101: Configuring as mouse
(II) HID 04d9:1101: Configuring as keyboard
(**) HID 04d9:1101: YAxisMapping: buttons 4 and 5
(**) HID 04d9:1101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 04d9:1101" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) HID 04d9:1101: (accel) keeping acceleration scheme 1
(**) HID 04d9:1101: (accel) filter chain progression: 2.00
(**) HID 04d9:1101: (accel) filter stage 0: 20.00 ms
(**) HID 04d9:1101: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech Logitech BT Mini-Receiver
(**) Logitech Logitech BT Mini-Receiver: always reports core events
(**) Logitech Logitech BT Mini-Receiver: Device: "/dev/input/event6"
(II) Logitech Logitech BT Mini-Receiver: Found 13 mouse buttons
(II) Logitech Logitech BT Mini-Receiver: Found x and y relative axes
(II) Logitech Logitech BT Mini-Receiver: Found scroll wheel(s)
(II) Logitech Logitech BT Mini-Receiver: Found keys
(II) Logitech Logitech BT Mini-Receiver: Configuring as mouse
(II) Logitech Logitech BT Mini-Receiver: Configuring as keyboard
(**) Logitech Logitech BT Mini-Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech Logitech BT Mini-Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Logitech BT Mini-Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Logitech Logitech BT Mini-Receiver: (accel) keeping acceleration scheme 1
(**) Logitech Logitech BT Mini-Receiver: (accel) filter chain progression: 2.00
(**) Logitech Logitech BT Mini-Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech Logitech BT Mini-Receiver: (accel) set acceleration profile 0

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ede76]
1: /usr/bin/X(xf86SigHandler+0x39) [0x483249]
2: /lib/libc.so.6 [0x7f86484cfd90]
3: /usr/lib/libdrm_intel.so.1 [0x7f86462d632c]
4: /usr/lib/libdrm_intel.so.1 [0x7f86462d6255]
5: /usr/lib/libdrm_intel.so.1 [0x7f86462d675c]
6: /usr/lib/xorg/modules/drivers//intel_drv.so(intel_batch_flush+0x93) [0x7f86464f9fd3]
7: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7f86465298fb]
8: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7f8646541b7d]
9: /usr/bin/X [0x532cbe]
10: /usr/bin/X(ValidateGC+0x24) [0x45d384]
11: /usr/bin/X(ProcPolyFillRectangle+0xa8) [0x44a328]
12: /usr/bin/X(Dispatch+0x364) [0x44d0a4]
13: /usr/bin/X(main+0x3aa) [0x43320a]
14: /lib/libc.so.6(__libc_start_main+0xe6) [0x7f86484bc5a6]
15: /usr/bin/X [0x4326a9]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) UnloadModule: "egalax"
(II) Logitech Logitech BT Mini-Receiver: Close
(II) UnloadModule: "evdev"
(II) HID 04d9:1101: Close
(II) UnloadModule: "evdev"
(II) Logitech Logitech BT Mini-Receiver: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "evtouch"

--- End Message ---

--- Begin Message ---

To: Guus Sliepen <guus@debian.org>

Cc: Eric Anholt <eric@anholt.net>, 536011-done@bugs.debian.org

Subject: Re: Bug#536011:

From: Cyril Brulebois <kibi@debian.org>

Date: Sun, 28 Feb 2010 18:57:00 +0100

Message-id: <20100228175700.GS3295@debian.org>

In-reply-to: <[🔎] 20100228172948.GC3007@sliepen.org>

References: <1252192481.5843.13.camel@gaiman.anholt.net> <[🔎] 20100227063055.GA15947@debian.org> <[🔎] 20100228172948.GC3007@sliepen.org>
Guus Sliepen <guus@debian.org> (28/02/2010):
> I've recently removed the i915.modeset=0 option, long after running
> 2.6.32 kernels, and everything seems to work fine now. I guess this
> bug can be closed.

Thanks for the follow-up. :)

Mraw,
KiBi.
Attachment: signature.asc
Description: Digital signature

--- End Message ---

Reply to:

Prev by Date: Bug#536011:
Next by Date: Bug#549661: More info - bug was "developing"
Previous by thread: Bug#571741: explaining hardware
Next by thread: Bug#549661: More info - bug was "developing"
Index(es):
- Date
- Thread