Bug#567993: marked as done (xserver-xorg-core: Server dies on mouse/keyboard hotplug)

To: Brice Goglin <Brice.Goglin@ens-lyon.org>
Subject: Bug#567993: marked as done (xserver-xorg-core: Server dies on mouse/keyboard hotplug)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Sat, 27 Feb 2010 12:06:07 +0000
Message-id: <[🔎] handler.567993.D567993.12672721829027.ackdone@bugs.debian.org>
References: <4B8909EF.60304@ens-lyon.org> <[🔎] 20100201182025.3117.48312.reportbug@durandal>

Your message dated Sat, 27 Feb 2010 13:02:55 +0100
with message-id <4B8909EF.60304@ens-lyon.org>
and subject line Re: Bug#567993: xserver-xorg-core: Server dies on mouse/keyboard hotplug
has caused the Debian Bug report #567993,
regarding xserver-xorg-core: Server dies on mouse/keyboard hotplug
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
567993: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567993
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: xserver-xorg-core: Server dies on mouse/keyboard hotplug
From: Sam Morris <sam@robots.org.uk>
Date: Mon, 01 Feb 2010 18:20:25 +0000
Message-id: <[🔎] 20100201182025.3117.48312.reportbug@durandal>

Package: xserver-xorg-core
Version: 2:1.7.4-2
Severity: important

I have my keyboard and mouse hooked up to a KVM via USB. When I press
the KVM switch button to switch back to my Debian system, the X server
crashes.

This didn't happen with 7.3.

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 Apr  9  2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1864832 Jan 20 23:37 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 826 Apr 27  2009 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier	"Configured Video Device"
	#Option "AccelMethod" "UXA"
EndSection

Section "ServerFlags"
    Option "AllowDeactivateGrabs" "true"
    Option "AllowClosedownGrabs" "true"
EndSection


Xorg X server log files on system:
-rw-r--r-- 1 root root  33256 Jul 17  2009 /var/log/Xorg.1.log
-rw-r--r-- 1 root root  65591 Jan  8 17:40 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 108519 Feb  1 18:14 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux durandal 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/durandal-root ro quiet
Build Date: 20 January 2010  11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 28 11:03:34 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a02:144d:c510 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:144d:c510 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: DEL  Model: f010  Serial#: 842027084
(II) intel(0): Year: 2009  Week: 27
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 146.2 MHz   Image Size:  474 x 296 mm
(II) intel(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) intel(0): Serial No: H735H97420PL
(II) intel(0): Monitor name: DELL 2209WA
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 160 MHz
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0010ac10f04c503032
(II) intel(0): 	1b130103682f1e782eee95a3544c9926
(II) intel(0): 	0f5054a54b00714f8180b30001010101
(II) intel(0): 	01010101010121399030621a274068b0
(II) intel(0): 	3600da281100001c000000ff00483733
(II) intel(0): 	35483937343230504c0a000000fc0044
(II) intel(0): 	454c4c203232303957410a20000000fd
(II) intel(0): 	00384b1e5310000a202020202020002e
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: SEC  Model: 4141  Serial#: 0
(II) intel(0): Year: 2006  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.3 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1328 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 810 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  SAMSUNG
(II) intel(0):  LTN121W1-L03
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3414100000000
(II) intel(0): 	00100103801a10780a87f594574f8c27
(II) intel(0): 	27505400000001010101010101010101
(II) intel(0): 	0101010101018319004050200a301020
(II) intel(0): 	13004bcf100000190000000f00000000
(II) intel(0): 	00000000000a3c046400000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c544e31323157312d4c30330a0094
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (470, 300) mm
(**) intel(0): DPI set to (55, 65)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device "Power Button" (/dev/input/event5)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event5"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event15)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event15"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Vega USB 2.0 Camera." (/dev/input/event13)
(**) "Vega USB 2.0 Camera.": always reports core events
(**) "Vega USB 2.0 Camera.": Device: "/dev/input/event13"
(II) "Vega USB 2.0 Camera.": Found keys
(II) "Vega USB 2.0 Camera.": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Vega USB 2.0 Camera."" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event6)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event6"
(II) "Justcom Technology USB KVM Switch": Found keys
(II) "Justcom Technology USB KVM Switch": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event7)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event7"
(II) "Justcom Technology USB KVM Switch": Found 3 mouse buttons
(II) "Justcom Technology USB KVM Switch": Found scroll wheel(s)
(II) "Justcom Technology USB KVM Switch": Found relative axes
(II) "Justcom Technology USB KVM Switch": Found x and y relative axes
(II) "Justcom Technology USB KVM Switch": Configuring as mouse
(**) "Justcom Technology USB KVM Switch": YAxisMapping: buttons 4 and 5
(**) "Justcom Technology USB KVM Switch": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: MOUSE)
(**) "Justcom Technology USB KVM Switch": (accel) keeping acceleration scheme 1
(**) "Justcom Technology USB KVM Switch": (accel) acceleration profile 0
(II) "Justcom Technology USB KVM Switch": initialized for relative axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/mouse1)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Justcom Technology USB KVM Switch""
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event12)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event12"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle double triple
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse3)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse3"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Justcom Technology USB KVM Switch"
(II) "Justcom Technology USB KVM Switch": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Justcom Technology USB KVM Switch"
(II) "Justcom Technology USB KVM Switch": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event7)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event7"
(II) "Justcom Technology USB KVM Switch": Found 3 mouse buttons
(II) "Justcom Technology USB KVM Switch": Found scroll wheel(s)
(II) "Justcom Technology USB KVM Switch": Found relative axes
(II) "Justcom Technology USB KVM Switch": Found x and y relative axes
(II) "Justcom Technology USB KVM Switch": Configuring as mouse
(**) "Justcom Technology USB KVM Switch": YAxisMapping: buttons 4 and 5
(**) "Justcom Technology USB KVM Switch": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: MOUSE)
(**) "Justcom Technology USB KVM Switch": (accel) keeping acceleration scheme 1
(**) "Justcom Technology USB KVM Switch": (accel) acceleration profile 0
(II) "Justcom Technology USB KVM Switch": initialized for relative axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/mouse1)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Justcom Technology USB KVM Switch""
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event6)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event6"
(II) "Justcom Technology USB KVM Switch": Found keys
(II) "Justcom Technology USB KVM Switch": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   65.31  1280 1296 1328 1344  800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0af8]
1: /usr/bin/X (0x400000+0x641c9) [0x4641c9]
2: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
3: /lib/libc.so.6 (0x7f5017518000+0x7341d) [0x7f501758b41d]
4: /lib/libc.so.6 (__libc_malloc+0x70) [0x7f501758daa0]
5: /usr/bin/X (0x400000+0xebc13) [0x4ebc13]
6: /usr/bin/X (0x400000+0xecf7b) [0x4ecf7b]
7: /usr/bin/X (0x400000+0x31524) [0x431524]
8: /usr/bin/X (0x400000+0x25bca) [0x425bca]
9: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f5017536abd]
10: /usr/bin/X (0x400000+0x25779) [0x425779]
Segmentation fault at address 0x20204000090

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0af8]
1: /usr/bin/X (mieqEnqueue+0x1f4) [0x4a04c4]
2: /usr/bin/X (xf86PostMotionEventP+0xce) [0x47b2ee]
3: /usr/bin/X (xf86PostMotionEvent+0xa9) [0x47b4a9]
4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f501473d000+0x38b9) [0x7f50147408b9]
5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f501473d000+0x5c78) [0x7f5014742c78]
6: /usr/bin/X (0x400000+0x6e357) [0x46e357]
7: /usr/bin/X (0x400000+0x1187d4) [0x5187d4]
8: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
9: /lib/libc.so.6 (0x7f5017518000+0xd834e) [0x7f50175f034e]
10: /lib/libc.so.6 (0x7f5017518000+0x775d8) [0x7f501758f5d8]
11: /lib/libc.so.6 (cfree+0x61) [0x7f501758d9b1]
12: /usr/bin/X (0x400000+0x66a22) [0x466a22]
13: /usr/bin/X (0x400000+0x66ab4) [0x466ab4]
14: /usr/bin/X (CloseWellKnownConnections+0x2f) [0x4614bf]
15: /usr/bin/X (0x400000+0x6a2c9) [0x46a2c9]
16: /usr/bin/X (0x400000+0x6a97e) [0x46a97e]
17: /usr/bin/X (0x400000+0x6421e) [0x46421e]
18: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
19: /lib/libc.so.6 (0x7f5017518000+0x7341d) [0x7f501758b41d]
20: /lib/libc.so.6 (__libc_malloc+0x70) [0x7f501758daa0]
21: /usr/bin/X (0x400000+0xebc13) [0x4ebc13]
22: /usr/bin/X (0x400000+0xecf7b) [0x4ecf7b]
23: /usr/bin/X (0x400000+0x31524) [0x431524]
24: /usr/bin/X (0x400000+0x25bca) [0x425bca]
25: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f5017536abd]
26: /usr/bin/X (0x400000+0x25779) [0x425779]

udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:64

P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.

P: /devices/platform/pcspkr/input/input11/event11
N: input/event11
S: char/13:75
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:75 /dev/input/by-path/platform-pcspkr-event-spkr

P: /devices/platform/i8042/serio4/input/input12/event12
N: input/event12
S: char/13:76
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: x11_driver=synaptics
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:76 /dev/input/by-path/platform-i8042-serio-4-event-mouse

P: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13/event13
N: input/event13
S: char/13:77
S: input/by-id/usb-Vimicro_Corp._Vega_USB_2.0_Camera.-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Vimicro_Corp.
E: ID_VENDOR_ENC=Vimicro\x20Corp.
E: ID_VENDOR_ID=0ac8
E: ID_MODEL=Vega_USB_2.0_Camera.
E: ID_MODEL_ENC=Vega\x20USB\x202.0\x20Camera.
E: ID_MODEL_ID=c302
E: ID_REVISION=0100
E: ID_SERIAL=Vimicro_Corp._Vega_USB_2.0_Camera.
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:2:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:77 /dev/input/by-id/usb-Vimicro_Corp._Vega_USB_2.0_Camera.-event-if00 /dev/input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev

P: /devices/pci0000:00/0000:00:1b.0/input/input14/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:78

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15
N: input/event15
S: char/13:79
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:79
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:66

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.

P: /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input18/event6
N: input/event6
S: char/13:70
S: input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input18/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Justcom_Technology
E: ID_VENDOR_ENC=Justcom\x20Technology
E: ID_VENDOR_ID=06f2
E: ID_MODEL=USB_KVM_Switch
E: ID_MODEL_ENC=USB\x20KVM\x20Switch
E: ID_MODEL_ID=0011
E: ID_REVISION=0100
E: ID_SERIAL=Justcom_Technology_USB_KVM_Switch
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev

P: /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input19/event7
N: input/event7
S: char/13:71
S: input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input19/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Justcom_Technology
E: ID_VENDOR_ENC=Justcom\x20Technology
E: ID_VENDOR_ID=06f2
E: ID_MODEL=USB_KVM_Switch
E: ID_MODEL_ENC=USB\x20KVM\x20Switch
E: ID_MODEL_ID=0011
E: ID_REVISION=0100
E: ID_SERIAL=Justcom_Technology_USB_KVM_Switch
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.1
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:71 /dev/input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.1-event-mouse

DRM Information from dmesg:
[    0.000000] No AGP bridge found
[    0.969133] Linux agpgart interface v0.103
[    1.145309] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    1.146074] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    1.149239] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   97.312159] [drm] Initialized drm 1.1.0 20060810
[   97.613646] [drm] set up 7M of stolen space
[   98.284045] fb0: inteldrmfb frame buffer device
[   98.286483] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   98.369404] [drm] DAC-6: set mode 1680x1050 1a
[   98.429885] [drm] LVDS-8: set mode 1280x800 1b
[   99.100433] [drm] DAC-6: set mode 1024x768 1d
[   99.491052] [drm] LVDS-8: set mode 1024x768 1e
[  174.695458] [drm] DAC-6: set mode  1c
[ 4936.716304] [drm] LVDS-8: set mode 1280x800 1b
[ 4936.843226] [drm] LVDS-8: set mode 1280x800 1b
[ 4937.293987] [drm] LVDS-8: set mode 1280x800 1b
[25546.636627] Modules linked in: hso usb_storage i915 drm_kms_helper drm i2c_algo_bit video output ppdev lp parport sco bridge stp bnep rfcomm l2cap crc16 bluetooth vboxnetflt vboxnetadp vboxdrv acpi_cpufreq cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace binfmt_misc fuse coretemp loop firewire_sbp2 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm ecb pcmcia snd_seq uvcvideo snd_timer iwl3945 videodev yenta_socket snd_seq_device iwlcore rsrc_nonstatic v4l1_compat snd i2c_i801 v4l2_compat_ioctl32 mac80211 soundcore pcmcia_core snd_page_alloc cfg80211 i2c_core joydev psmouse rfkill wmi serio_raw pcspkr evdev processor battery ac ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc hid_cherry usbhid hid dm_crypt dm_mod sg sr_mod sd_mod crc_t10dif cdrom ide_pci_generic ide_core ata_generic uhci_hcd sdhci_pci sdhci intel_agp firewire_ohci ehci_hcd mmc_core ricoh_mmc led_class firewire_core crc_itu_t ata_piix sky2 agpgart
  libata button scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[25547.670231] [drm] LVDS-8: set mode 1280x800 1b
[25550.486650] [drm] DAC-6: set mode  1c
[25557.446351] [drm] LVDS-8: set mode 1280x800 1b
[25557.566855] [drm] LVDS-8: set mode 1280x800 1b
[25561.663020] [drm] LVDS-8: set mode 1280x800 1b
[25561.784276] [drm] LVDS-8: set mode 1280x800 1b
[25565.823907] [drm] LVDS-8: set mode 1280x800 1b
[25565.944626] [drm] LVDS-8: set mode 1280x800 1b
[25569.141384] [drm] LVDS-8: set mode 1280x800 1b
[25569.261891] [drm] LVDS-8: set mode 1280x800 1b
[56121.238665] [drm] DAC-6: set mode  1c
[56121.804832] [drm] LVDS-8: set mode  18
[56130.834814] [drm] DAC-6: set mode  1c
[56130.915091] [drm] LVDS-8: set mode  18
[56135.226232] [drm] LVDS-8: set mode  f
[56164.264191] [drm] DAC-6: set mode 1680x1050 1a
[56166.993602] [drm] LVDS-8: set mode  f
[56201.324685] [drm] DAC-6: set mode  e
[56227.926439] [drm] DAC-6: set mode  11
[56245.384241] [drm] DAC-6: set mode  13
[56274.953431] [drm] DAC-6: set mode  15
[56275.809794] [drm] DAC-6: set mode  27
[85872.466683] [drm] DAC-6: set mode  27


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (530, 'testing'), (520, 'unstable'), (400, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg-core depends on:
ii  keyboard-configuration       1.50        system-wide keyboard preferences
ii  libaudit0                    1.7.13-1+b1 Dynamic library for security audit
ii  libc6                        2.10.2-2    GNU C Library: Shared libraries
ii  libdrm2                      2.4.15-1    Userspace interface to kernel DRM 
ii  libgcrypt11                  1.4.4-6     LGPL Crypto library - runtime libr
ii  libpciaccess0                0.11.0-1    Generic PCI access library for X
ii  libpixman-1-0                0.16.4-1    pixel-manipulation library for X a
ii  libselinux1                  2.0.89-4    SELinux runtime shared libraries
ii  libudev0                     150-2       libudev shared library
ii  libxau6                      1:1.0.5-1   X11 authorisation library
ii  libxdmcp6                    1:1.0.3-1   X11 Display Manager Control Protoc
ii  libxfont1                    1:1.4.1-1   X11 font rasterisation library
ii  udev                         150-2       /dev/ and hotplug management daemo
ii  xserver-common               2:1.7.4-2   common files used by various X ser
ii  xserver-xorg                 1:7.5+2     the X.Org X server

Versions of packages xserver-xorg-core recommends:
ii  libgl1-mesa-dri               7.6.1-1    A free implementation of the OpenG

Versions of packages xserver-xorg-core suggests:
ii  xfonts-100dpi                 1:1.0.1    100 dpi fonts for X
ii  xfonts-75dpi                  1:1.0.1    75 dpi fonts for X
ii  xfonts-scalable               1:1.0.1-1  scalable fonts for X

-- no debconf information

Feb  1 10:22:00 durandal kernel: imklog 4.4.2, log source = /proc/kmsg started.
Feb  1 10:44:23 durandal kernel: [58890.316052] No probe response from AP 00:02:cf:85:cd:e2 after 500ms, disconnecting.
Feb  1 10:44:23 durandal kernel: [58890.770345] wlan0: direct probe to AP 00:02:cf:85:cd:e2 (try 1)
Feb  1 10:44:23 durandal kernel: [58890.774471] wlan0: direct probe responded
Feb  1 10:44:23 durandal kernel: [58890.774479] wlan0: authenticate with AP 00:02:cf:85:cd:e2 (try 1)
Feb  1 10:44:23 durandal kernel: [58890.781978] wlan0: authenticated
Feb  1 10:44:23 durandal kernel: [58890.782003] wlan0: associate with AP 00:02:cf:85:cd:e2 (try 1)
Feb  1 10:44:23 durandal kernel: [58890.785750] wlan0: RX ReassocResp from 00:02:cf:85:cd:e2 (capab=0x431 status=0 aid=1)
Feb  1 10:44:23 durandal kernel: [58890.785755] wlan0: associated
Feb  1 12:33:03 durandal kernel: [65410.287398] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Feb  1 12:33:03 durandal kernel: [65410.287802] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Feb  1 12:33:13 durandal kernel: [65420.328033] eth0: no IPv6 routers present
Feb  1 12:33:13 durandal kernel: [65420.577054] wlan0: deauthenticating from 00:02:cf:85:cd:e2 by local choice (reason=3)
Feb  1 12:33:13 durandal kernel: [65420.578476] wlan0: direct probe to AP 00:02:cf:85:cd:e2 (try 1)
Feb  1 12:33:13 durandal kernel: [65420.578497] wlan0: deauthenticating from 00:02:cf:85:cd:e2 by local choice (reason=3)
Feb  1 17:28:44 durandal kernel: [83151.348408] usb 5-1.2: USB disconnect, address 25
Feb  1 17:28:44 durandal kernel: [83151.348415] usb 5-1.2.1: USB disconnect, address 26
Feb  1 17:28:44 durandal kernel: [83151.373559] usb 5-1.2.2: USB disconnect, address 27
Feb  1 17:28:48 durandal kernel: [83155.005408] usb 5-1.2: new full speed USB device using uhci_hcd and address 28
Feb  1 17:28:48 durandal kernel: [83155.107396] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb  1 17:28:48 durandal kernel: [83155.115401] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb  1 17:28:48 durandal kernel: [83155.115407] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:28:48 durandal kernel: [83155.115577] usb 5-1.2: configuration #1 chosen from 1 choice
Feb  1 17:28:48 durandal kernel: [83155.118471] hub 5-1.2:1.0: USB hub found
Feb  1 17:28:48 durandal kernel: [83155.120395] hub 5-1.2:1.0: 4 ports detected
Feb  1 17:28:48 durandal kernel: [83155.402412] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 29
Feb  1 17:28:48 durandal kernel: [83155.554404] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb  1 17:28:48 durandal kernel: [83155.554412] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  1 17:28:48 durandal kernel: [83155.554417] usb 5-1.2.1: Product: USB Optical Mouse
Feb  1 17:28:48 durandal kernel: [83155.554421] usb 5-1.2.1: Manufacturer: Logitech
Feb  1 17:28:48 durandal kernel: [83155.554607] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb  1 17:28:48 durandal kernel: [83155.571878] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input38
Feb  1 17:28:48 durandal kernel: [83155.572105] generic-usb 0003:046D:C046.001C: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb  1 17:28:48 durandal kernel: [83155.654160] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 30
Feb  1 17:28:48 durandal kernel: [83155.773416] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb  1 17:28:48 durandal kernel: [83155.773424] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:28:48 durandal kernel: [83155.773612] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb  1 17:28:48 durandal kernel: [83155.790936] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input39
Feb  1 17:28:48 durandal kernel: [83155.791110] cherry 0003:046A:0023.001D: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb  1 17:28:48 durandal kernel: [83155.813654] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input40
Feb  1 17:28:48 durandal kernel: [83155.813828] cherry 0003:046A:0023.001E: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb  1 17:29:02 durandal kernel: [83169.268405] usb 5-1.2: USB disconnect, address 28
Feb  1 17:29:02 durandal kernel: [83169.268411] usb 5-1.2.1: USB disconnect, address 29
Feb  1 17:29:02 durandal kernel: [83169.300600] usb 5-1.2.2: USB disconnect, address 30
Feb  1 17:29:05 durandal kernel: [83172.797406] usb 5-1.2: new full speed USB device using uhci_hcd and address 31
Feb  1 17:29:05 durandal kernel: [83172.899400] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb  1 17:29:05 durandal kernel: [83172.907406] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb  1 17:29:05 durandal kernel: [83172.907412] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:29:05 durandal kernel: [83172.907582] usb 5-1.2: configuration #1 chosen from 1 choice
Feb  1 17:29:05 durandal kernel: [83172.910485] hub 5-1.2:1.0: USB hub found
Feb  1 17:29:05 durandal kernel: [83172.913042] hub 5-1.2:1.0: 4 ports detected
Feb  1 17:29:06 durandal kernel: [83173.209404] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 32
Feb  1 17:29:06 durandal kernel: [83173.346402] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb  1 17:29:06 durandal kernel: [83173.346409] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  1 17:29:06 durandal kernel: [83173.346414] usb 5-1.2.1: Product: USB Optical Mouse
Feb  1 17:29:06 durandal kernel: [83173.346418] usb 5-1.2.1: Manufacturer: Logitech
Feb  1 17:29:06 durandal kernel: [83173.346592] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb  1 17:29:06 durandal kernel: [83173.363907] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input41
Feb  1 17:29:06 durandal kernel: [83173.364201] generic-usb 0003:046D:C046.001F: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb  1 17:29:06 durandal kernel: [83173.457410] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 33
Feb  1 17:29:06 durandal kernel: [83173.581456] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb  1 17:29:06 durandal kernel: [83173.581463] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:29:06 durandal kernel: [83173.581644] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb  1 17:29:06 durandal kernel: [83173.598039] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input42
Feb  1 17:29:06 durandal kernel: [83173.598219] cherry 0003:046A:0023.0020: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb  1 17:29:06 durandal kernel: [83173.622342] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input43
Feb  1 17:29:06 durandal kernel: [83173.622522] cherry 0003:046A:0023.0021: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb  1 17:29:13 durandal kernel: [83180.404405] usb 5-1.2: USB disconnect, address 31
Feb  1 17:29:13 durandal kernel: [83180.404411] usb 5-1.2.1: USB disconnect, address 32
Feb  1 17:29:13 durandal kernel: [83180.432607] usb 5-1.2.2: USB disconnect, address 33
Feb  1 17:29:17 durandal kernel: [83184.061401] usb 5-1.2: new full speed USB device using uhci_hcd and address 34
Feb  1 17:29:17 durandal kernel: [83184.163401] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb  1 17:29:17 durandal kernel: [83184.171406] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb  1 17:29:17 durandal kernel: [83184.171412] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:29:17 durandal kernel: [83184.171583] usb 5-1.2: configuration #1 chosen from 1 choice
Feb  1 17:29:17 durandal kernel: [83184.174478] hub 5-1.2:1.0: USB hub found
Feb  1 17:29:17 durandal kernel: [83184.176404] hub 5-1.2:1.0: 4 ports detected
Feb  1 17:29:17 durandal kernel: [83184.473407] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 35
Feb  1 17:29:17 durandal kernel: [83184.610401] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb  1 17:29:17 durandal kernel: [83184.610408] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  1 17:29:17 durandal kernel: [83184.610413] usb 5-1.2.1: Product: USB Optical Mouse
Feb  1 17:29:17 durandal kernel: [83184.610417] usb 5-1.2.1: Manufacturer: Logitech
Feb  1 17:29:17 durandal kernel: [83184.610589] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb  1 17:29:17 durandal kernel: [83184.627915] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input44
Feb  1 17:29:17 durandal kernel: [83184.628338] generic-usb 0003:046D:C046.0022: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb  1 17:29:17 durandal kernel: [83184.717409] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 36
Feb  1 17:29:17 durandal kernel: [83184.837411] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb  1 17:29:17 durandal kernel: [83184.837417] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 17:29:17 durandal kernel: [83184.837597] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb  1 17:29:17 durandal kernel: [83184.854974] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input45
Feb  1 17:29:17 durandal kernel: [83184.855151] cherry 0003:046A:0023.0023: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb  1 17:29:17 durandal kernel: [83184.877715] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input46
Feb  1 17:29:17 durandal kernel: [83184.877884] cherry 0003:046A:0023.0024: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb  1 17:29:37 durandal kernel: [83203.956418] usb 5-1.2: USB disconnect, address 34
Feb  1 17:29:37 durandal kernel: [83203.956424] usb 5-1.2.1: USB disconnect, address 35
Feb  1 17:29:37 durandal kernel: [83203.981603] usb 5-1.2.2: USB disconnect, address 36
Feb  1 18:13:16 durandal kernel: [85823.677739] usb 5-1.2: new full speed USB device using uhci_hcd and address 37
Feb  1 18:13:16 durandal kernel: [85823.779737] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb  1 18:13:16 durandal kernel: [85823.787740] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb  1 18:13:16 durandal kernel: [85823.787746] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 18:13:16 durandal kernel: [85823.787911] usb 5-1.2: configuration #1 chosen from 1 choice
Feb  1 18:13:16 durandal kernel: [85823.790817] hub 5-1.2:1.0: USB hub found
Feb  1 18:13:16 durandal kernel: [85823.796037] hub 5-1.2:1.0: 4 ports detected
Feb  1 18:13:17 durandal kernel: [85824.077746] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 38
Feb  1 18:13:17 durandal kernel: [85824.215744] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb  1 18:13:17 durandal kernel: [85824.215750] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  1 18:13:17 durandal kernel: [85824.215755] usb 5-1.2.1: Product: USB Optical Mouse
Feb  1 18:13:17 durandal kernel: [85824.215760] usb 5-1.2.1: Manufacturer: Logitech
Feb  1 18:13:17 durandal kernel: [85824.215920] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb  1 18:13:17 durandal kernel: [85824.233275] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input47
Feb  1 18:13:17 durandal kernel: [85824.233477] generic-usb 0003:046D:C046.0025: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb  1 18:13:17 durandal kernel: [85824.321745] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 39
Feb  1 18:13:17 durandal kernel: [85824.441746] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb  1 18:13:17 durandal kernel: [85824.441752] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 18:13:17 durandal kernel: [85824.441933] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb  1 18:13:17 durandal kernel: [85824.459312] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input48
Feb  1 18:13:17 durandal kernel: [85824.459486] cherry 0003:046A:0023.0026: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb  1 18:13:17 durandal kernel: [85824.482986] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input49
Feb  1 18:13:17 durandal kernel: [85824.483162] cherry 0003:046A:0023.0027: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb  1 18:13:23 durandal kernel: [85830.644743] usb 5-1.2: USB disconnect, address 37
Feb  1 18:13:23 durandal kernel: [85830.644749] usb 5-1.2.1: USB disconnect, address 38
Feb  1 18:13:23 durandal kernel: [85830.680613] usb 5-1.2.2: USB disconnect, address 39
Feb  1 18:13:42 durandal kernel: [85849.021745] usb 5-1.2: new full speed USB device using uhci_hcd and address 40
Feb  1 18:13:42 durandal kernel: [85849.123739] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb  1 18:13:42 durandal kernel: [85849.131742] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb  1 18:13:42 durandal kernel: [85849.131748] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 18:13:42 durandal kernel: [85849.131916] usb 5-1.2: configuration #1 chosen from 1 choice
Feb  1 18:13:42 durandal kernel: [85849.133825] hub 5-1.2:1.0: USB hub found
Feb  1 18:13:42 durandal kernel: [85849.136100] hub 5-1.2:1.0: 4 ports detected
Feb  1 18:13:42 durandal kernel: [85849.433745] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 41
Feb  1 18:13:42 durandal kernel: [85849.569742] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb  1 18:13:42 durandal kernel: [85849.569749] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb  1 18:13:42 durandal kernel: [85849.569754] usb 5-1.2.1: Product: USB Optical Mouse
Feb  1 18:13:42 durandal kernel: [85849.569758] usb 5-1.2.1: Manufacturer: Logitech
Feb  1 18:13:42 durandal kernel: [85849.569930] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb  1 18:13:42 durandal kernel: [85849.587252] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input50
Feb  1 18:13:42 durandal kernel: [85849.587454] generic-usb 0003:046D:C046.0028: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb  1 18:13:42 durandal kernel: [85849.661749] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 42
Feb  1 18:13:42 durandal kernel: [85849.781750] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb  1 18:13:42 durandal kernel: [85849.781756] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb  1 18:13:42 durandal kernel: [85849.781934] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb  1 18:13:42 durandal kernel: [85849.799313] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input51
Feb  1 18:13:42 durandal kernel: [85849.799488] cherry 0003:046A:0023.0029: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb  1 18:13:42 durandal kernel: [85849.821990] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input52
Feb  1 18:13:42 durandal kernel: [85849.822161] cherry 0003:046A:0023.002A: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb  1 18:14:05 durandal kernel: [85872.466683] [drm] DAC-6: set mode  27
Feb  1 18:14:39 durandal kernel: [85906.036753] usb 5-1.2: USB disconnect, address 40
Feb  1 18:14:39 durandal kernel: [85906.036760] usb 5-1.2.1: USB disconnect, address 41
Feb  1 18:14:39 durandal kernel: [85906.072594] usb 5-1.2.2: USB disconnect, address 42

--- End Message ---

--- Begin Message ---

To: Sam Morris <sam@robots.org.uk>, 567993-done@bugs.debian.org

Subject: Re: Bug#567993: xserver-xorg-core: Server dies on mouse/keyboard hotplug

From: Brice Goglin <Brice.Goglin@ens-lyon.org>

Date: Sat, 27 Feb 2010 13:02:55 +0100

Message-id: <4B8909EF.60304@ens-lyon.org>

In-reply-to: <[🔎] 20100201182025.3117.48312.reportbug@durandal>

References: <[🔎] 20100201182025.3117.48312.reportbug@durandal>
Version: 2:1.7.5-1


Sam Morris wrote:
> Package: xserver-xorg-core
> Version: 2:1.7.4-2
> Severity: important
>
> I have my keyboard and mouse hooked up to a KVM via USB. When I press
> the KVM switch button to switch back to my Debian system, the X server
> crashes.
>   

Probably the input-reconnection bug, fixed in 1.7.5.

Brice
--- End Message ---

Reply to:

References:
- Bug#567993: xserver-xorg-core: Server dies on mouse/keyboard hotplug
  - From: Sam Morris <sam@robots.org.uk>

Prev by Date: Bug#566059: marked as done (video-nv: claims device it does not support)
Next by Date: Processed: tagging 569103, bug 569103 is forwarded to https://bugs.freedesktop.org/show_bug.cgi?id=26786
Previous by thread: Bug#567993: xserver-xorg-core: Server dies on mouse/keyboard hotplug
Next by thread: Bug#567999: xserver-xorg-video-radeon: Please compile with kernel-based modesetting (KMS) enabled
Index(es):
- Date
- Thread