Bug#567993: xserver-xorg-core: Server dies on mouse/keyboard hotplug
Package: xserver-xorg-core
Version: 2:1.7.4-2
Severity: important
I have my keyboard and mouse hooked up to a KVM via USB. When I press
the KVM switch button to switch back to my Debian system, the X server
crashes.
This didn't happen with 7.3.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Apr 9 2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1864832 Jan 20 23:37 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 826 Apr 27 2009 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
#Option "AccelMethod" "UXA"
EndSection
Section "ServerFlags"
Option "AllowDeactivateGrabs" "true"
Option "AllowClosedownGrabs" "true"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 33256 Jul 17 2009 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 65591 Jan 8 17:40 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 108519 Feb 1 18:14 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux durandal 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/durandal-root ro quiet
Build Date: 20 January 2010 11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 28 11:03:34 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:144d:c510 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:144d:c510 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: DEL Model: f010 Serial#: 842027084
(II) intel(0): Year: 2009 Week: 27
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 146.2 MHz Image Size: 474 x 296 mm
(II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) intel(0): Serial No: H735H97420PL
(II) intel(0): Monitor name: DELL 2209WA
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 160 MHz
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0010ac10f04c503032
(II) intel(0): 1b130103682f1e782eee95a3544c9926
(II) intel(0): 0f5054a54b00714f8180b30001010101
(II) intel(0): 01010101010121399030621a274068b0
(II) intel(0): 3600da281100001c000000ff00483733
(II) intel(0): 35483937343230504c0a000000fc0044
(II) intel(0): 454c4c203232303957410a20000000fd
(II) intel(0): 00384b1e5310000a202020202020002e
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: SEC Model: 4141 Serial#: 0
(II) intel(0): Year: 2006 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.3 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1328 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 810 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): SAMSUNG
(II) intel(0): LTN121W1-L03
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004ca3414100000000
(II) intel(0): 00100103801a10780a87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 0101010101018319004050200a301020
(II) intel(0): 13004bcf100000190000000f00000000
(II) intel(0): 00000000000a3c046400000000fe0053
(II) intel(0): 414d53554e470a2020202020000000fe
(II) intel(0): 004c544e31323157312d4c30330a0094
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA1 connected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (470, 300) mm
(**) intel(0): DPI set to (55, 65)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device "Power Button" (/dev/input/event5)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event5"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event15)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event15"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Vega USB 2.0 Camera." (/dev/input/event13)
(**) "Vega USB 2.0 Camera.": always reports core events
(**) "Vega USB 2.0 Camera.": Device: "/dev/input/event13"
(II) "Vega USB 2.0 Camera.": Found keys
(II) "Vega USB 2.0 Camera.": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Vega USB 2.0 Camera."" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event6)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event6"
(II) "Justcom Technology USB KVM Switch": Found keys
(II) "Justcom Technology USB KVM Switch": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event7)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event7"
(II) "Justcom Technology USB KVM Switch": Found 3 mouse buttons
(II) "Justcom Technology USB KVM Switch": Found scroll wheel(s)
(II) "Justcom Technology USB KVM Switch": Found relative axes
(II) "Justcom Technology USB KVM Switch": Found x and y relative axes
(II) "Justcom Technology USB KVM Switch": Configuring as mouse
(**) "Justcom Technology USB KVM Switch": YAxisMapping: buttons 4 and 5
(**) "Justcom Technology USB KVM Switch": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: MOUSE)
(**) "Justcom Technology USB KVM Switch": (accel) keeping acceleration scheme 1
(**) "Justcom Technology USB KVM Switch": (accel) acceleration profile 0
(II) "Justcom Technology USB KVM Switch": initialized for relative axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/mouse1)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Justcom Technology USB KVM Switch""
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event12)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event12"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle double triple
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse3)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse3"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 2960x1050 stride 3072
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Justcom Technology USB KVM Switch"
(II) "Justcom Technology USB KVM Switch": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Justcom Technology USB KVM Switch"
(II) "Justcom Technology USB KVM Switch": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event7)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event7"
(II) "Justcom Technology USB KVM Switch": Found 3 mouse buttons
(II) "Justcom Technology USB KVM Switch": Found scroll wheel(s)
(II) "Justcom Technology USB KVM Switch": Found relative axes
(II) "Justcom Technology USB KVM Switch": Found x and y relative axes
(II) "Justcom Technology USB KVM Switch": Configuring as mouse
(**) "Justcom Technology USB KVM Switch": YAxisMapping: buttons 4 and 5
(**) "Justcom Technology USB KVM Switch": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: MOUSE)
(**) "Justcom Technology USB KVM Switch": (accel) keeping acceleration scheme 1
(**) "Justcom Technology USB KVM Switch": (accel) acceleration profile 0
(II) "Justcom Technology USB KVM Switch": initialized for relative axes.
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/mouse1)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Justcom Technology USB KVM Switch""
(II) config/udev: Adding input device "Justcom Technology USB KVM Switch" (/dev/input/event6)
(**) "Justcom Technology USB KVM Switch": always reports core events
(**) "Justcom Technology USB KVM Switch": Device: "/dev/input/event6"
(II) "Justcom Technology USB KVM Switch": Found keys
(II) "Justcom Technology USB KVM Switch": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Justcom Technology USB KVM Switch"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): No memory allocations
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Vega USB 2.0 Camera.": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Justcom Technology USB KVM Switch": Device reopened after 1 attempts.
(II) "Logitech USB Optical Mouse": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) "HID 046a:0023": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): Allocate new frame buffer 2080x800 stride 2176
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "DEL", prod id 61456
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event9)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event9"
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as keyboard
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "HID 046a:0023" (/dev/input/event10)
(**) "HID 046a:0023": always reports core events
(**) "HID 046a:0023": Device: "/dev/input/event10"
(II) "HID 046a:0023": Found 1 mouse buttons
(II) "HID 046a:0023": Found scroll wheel(s)
(II) "HID 046a:0023": Found relative axes
(II) "HID 046a:0023": Found absolute axes
(II) "HID 046a:0023": Found keys
(II) "HID 046a:0023": Configuring as mouse
(II) "HID 046a:0023": Configuring as keyboard
(**) "HID 046a:0023": YAxisMapping: buttons 4 and 5
(**) "HID 046a:0023": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""HID 046a:0023"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) "HID 046a:0023": failed to initialize for relative axes.
(**) "HID 046a:0023": (accel) keeping acceleration scheme 1
(**) "HID 046a:0023": (accel) acceleration profile 0
(II) "HID 046a:0023": initialized for absolute axes.
(II) config/udev: removing device "Logitech USB Optical Mouse"
(II) "Logitech USB Optical Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "HID 046a:0023"
(II) "HID 046a:0023": Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse2)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Optical Mouse""
(II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event8)
(**) "Logitech USB Optical Mouse": always reports core events
(**) "Logitech USB Optical Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB Optical Mouse": Found relative axes
(II) "Logitech USB Optical Mouse": Found x and y relative axes
(II) "Logitech USB Optical Mouse": Configuring as mouse
(**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE)
(**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB Optical Mouse": initialized for relative axes.
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0af8]
1: /usr/bin/X (0x400000+0x641c9) [0x4641c9]
2: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
3: /lib/libc.so.6 (0x7f5017518000+0x7341d) [0x7f501758b41d]
4: /lib/libc.so.6 (__libc_malloc+0x70) [0x7f501758daa0]
5: /usr/bin/X (0x400000+0xebc13) [0x4ebc13]
6: /usr/bin/X (0x400000+0xecf7b) [0x4ecf7b]
7: /usr/bin/X (0x400000+0x31524) [0x431524]
8: /usr/bin/X (0x400000+0x25bca) [0x425bca]
9: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f5017536abd]
10: /usr/bin/X (0x400000+0x25779) [0x425779]
Segmentation fault at address 0x20204000090
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[mi] EQ overflowing. The server is probably stuck in an infinite loop.
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0af8]
1: /usr/bin/X (mieqEnqueue+0x1f4) [0x4a04c4]
2: /usr/bin/X (xf86PostMotionEventP+0xce) [0x47b2ee]
3: /usr/bin/X (xf86PostMotionEvent+0xa9) [0x47b4a9]
4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f501473d000+0x38b9) [0x7f50147408b9]
5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f501473d000+0x5c78) [0x7f5014742c78]
6: /usr/bin/X (0x400000+0x6e357) [0x46e357]
7: /usr/bin/X (0x400000+0x1187d4) [0x5187d4]
8: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
9: /lib/libc.so.6 (0x7f5017518000+0xd834e) [0x7f50175f034e]
10: /lib/libc.so.6 (0x7f5017518000+0x775d8) [0x7f501758f5d8]
11: /lib/libc.so.6 (cfree+0x61) [0x7f501758d9b1]
12: /usr/bin/X (0x400000+0x66a22) [0x466a22]
13: /usr/bin/X (0x400000+0x66ab4) [0x466ab4]
14: /usr/bin/X (CloseWellKnownConnections+0x2f) [0x4614bf]
15: /usr/bin/X (0x400000+0x6a2c9) [0x46a2c9]
16: /usr/bin/X (0x400000+0x6a97e) [0x46a97e]
17: /usr/bin/X (0x400000+0x6421e) [0x46421e]
18: /lib/libpthread.so.0 (0x7f5018c40000+0xe990) [0x7f5018c4e990]
19: /lib/libc.so.6 (0x7f5017518000+0x7341d) [0x7f501758b41d]
20: /lib/libc.so.6 (__libc_malloc+0x70) [0x7f501758daa0]
21: /usr/bin/X (0x400000+0xebc13) [0x4ebc13]
22: /usr/bin/X (0x400000+0xecf7b) [0x4ecf7b]
23: /usr/bin/X (0x400000+0x31524) [0x431524]
24: /usr/bin/X (0x400000+0x25bca) [0x425bca]
25: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f5017536abd]
26: /usr/bin/X (0x400000+0x25779) [0x425779]
udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:64
P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
P: /devices/platform/pcspkr/input/input11/event11
N: input/event11
S: char/13:75
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:75 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/platform/i8042/serio4/input/input12/event12
N: input/event12
S: char/13:76
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: x11_driver=synaptics
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:76 /dev/input/by-path/platform-i8042-serio-4-event-mouse
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13/event13
N: input/event13
S: char/13:77
S: input/by-id/usb-Vimicro_Corp._Vega_USB_2.0_Camera.-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Vimicro_Corp.
E: ID_VENDOR_ENC=Vimicro\x20Corp.
E: ID_VENDOR_ID=0ac8
E: ID_MODEL=Vega_USB_2.0_Camera.
E: ID_MODEL_ENC=Vega\x20USB\x202.0\x20Camera.
E: ID_MODEL_ID=c302
E: ID_REVISION=0100
E: ID_SERIAL=Vimicro_Corp._Vega_USB_2.0_Camera.
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:2:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:77 /dev/input/by-id/usb-Vimicro_Corp._Vega_USB_2.0_Camera.-event-if00 /dev/input/by-path/pci-0000:00:1a.7-usb-0:2:1.0-event
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1b.0/input/input14/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:78
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15
N: input/event15
S: char/13:79
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:79
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
E: DEVLINKS=/dev/char/13:66
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=SAMSUNG ELECTRONICS CO., LTD.
P: /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input18/event6
N: input/event6
S: char/13:70
S: input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input18/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Justcom_Technology
E: ID_VENDOR_ENC=Justcom\x20Technology
E: ID_VENDOR_ID=06f2
E: ID_MODEL=USB_KVM_Switch
E: ID_MODEL_ENC=USB\x20KVM\x20Switch
E: ID_MODEL_ID=0011
E: ID_REVISION=0100
E: ID_SERIAL=Justcom_Technology_USB_KVM_Switch
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input19/event7
N: input/event7
S: char/13:71
S: input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input19/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Justcom_Technology
E: ID_VENDOR_ENC=Justcom\x20Technology
E: ID_VENDOR_ID=06f2
E: ID_MODEL=USB_KVM_Switch
E: ID_MODEL_ENC=USB\x20KVM\x20Switch
E: ID_MODEL_ID=0011
E: ID_REVISION=0100
E: ID_SERIAL=Justcom_Technology_USB_KVM_Switch
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.1
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:71 /dev/input/by-id/usb-Justcom_Technology_USB_KVM_Switch-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.1-event-mouse
DRM Information from dmesg:
[ 0.000000] No AGP bridge found
[ 0.969133] Linux agpgart interface v0.103
[ 1.145309] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 1.146074] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 1.149239] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 97.312159] [drm] Initialized drm 1.1.0 20060810
[ 97.613646] [drm] set up 7M of stolen space
[ 98.284045] fb0: inteldrmfb frame buffer device
[ 98.286483] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 98.369404] [drm] DAC-6: set mode 1680x1050 1a
[ 98.429885] [drm] LVDS-8: set mode 1280x800 1b
[ 99.100433] [drm] DAC-6: set mode 1024x768 1d
[ 99.491052] [drm] LVDS-8: set mode 1024x768 1e
[ 174.695458] [drm] DAC-6: set mode 1c
[ 4936.716304] [drm] LVDS-8: set mode 1280x800 1b
[ 4936.843226] [drm] LVDS-8: set mode 1280x800 1b
[ 4937.293987] [drm] LVDS-8: set mode 1280x800 1b
[25546.636627] Modules linked in: hso usb_storage i915 drm_kms_helper drm i2c_algo_bit video output ppdev lp parport sco bridge stp bnep rfcomm l2cap crc16 bluetooth vboxnetflt vboxnetadp vboxdrv acpi_cpufreq cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_userspace binfmt_misc fuse coretemp loop firewire_sbp2 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm ecb pcmcia snd_seq uvcvideo snd_timer iwl3945 videodev yenta_socket snd_seq_device iwlcore rsrc_nonstatic v4l1_compat snd i2c_i801 v4l2_compat_ioctl32 mac80211 soundcore pcmcia_core snd_page_alloc cfg80211 i2c_core joydev psmouse rfkill wmi serio_raw pcspkr evdev processor battery ac ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc hid_cherry usbhid hid dm_crypt dm_mod sg sr_mod sd_mod crc_t10dif cdrom ide_pci_generic ide_core ata_generic uhci_hcd sdhci_pci sdhci intel_agp firewire_ohci ehci_hcd mmc_core ricoh_mmc led_class firewire_core crc_itu_t ata_piix sky2 agpgart
libata button scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]
[25547.670231] [drm] LVDS-8: set mode 1280x800 1b
[25550.486650] [drm] DAC-6: set mode 1c
[25557.446351] [drm] LVDS-8: set mode 1280x800 1b
[25557.566855] [drm] LVDS-8: set mode 1280x800 1b
[25561.663020] [drm] LVDS-8: set mode 1280x800 1b
[25561.784276] [drm] LVDS-8: set mode 1280x800 1b
[25565.823907] [drm] LVDS-8: set mode 1280x800 1b
[25565.944626] [drm] LVDS-8: set mode 1280x800 1b
[25569.141384] [drm] LVDS-8: set mode 1280x800 1b
[25569.261891] [drm] LVDS-8: set mode 1280x800 1b
[56121.238665] [drm] DAC-6: set mode 1c
[56121.804832] [drm] LVDS-8: set mode 18
[56130.834814] [drm] DAC-6: set mode 1c
[56130.915091] [drm] LVDS-8: set mode 18
[56135.226232] [drm] LVDS-8: set mode f
[56164.264191] [drm] DAC-6: set mode 1680x1050 1a
[56166.993602] [drm] LVDS-8: set mode f
[56201.324685] [drm] DAC-6: set mode e
[56227.926439] [drm] DAC-6: set mode 11
[56245.384241] [drm] DAC-6: set mode 13
[56274.953431] [drm] DAC-6: set mode 15
[56275.809794] [drm] DAC-6: set mode 27
[85872.466683] [drm] DAC-6: set mode 27
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (530, 'testing'), (520, 'unstable'), (400, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.50 system-wide keyboard preferences
ii libaudit0 1.7.13-1+b1 Dynamic library for security audit
ii libc6 2.10.2-2 GNU C Library: Shared libraries
ii libdrm2 2.4.15-1 Userspace interface to kernel DRM
ii libgcrypt11 1.4.4-6 LGPL Crypto library - runtime libr
ii libpciaccess0 0.11.0-1 Generic PCI access library for X
ii libpixman-1-0 0.16.4-1 pixel-manipulation library for X a
ii libselinux1 2.0.89-4 SELinux runtime shared libraries
ii libudev0 150-2 libudev shared library
ii libxau6 1:1.0.5-1 X11 authorisation library
ii libxdmcp6 1:1.0.3-1 X11 Display Manager Control Protoc
ii libxfont1 1:1.4.1-1 X11 font rasterisation library
ii udev 150-2 /dev/ and hotplug management daemo
ii xserver-common 2:1.7.4-2 common files used by various X ser
ii xserver-xorg 1:7.5+2 the X.Org X server
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.6.1-1 A free implementation of the OpenG
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.1 75 dpi fonts for X
ii xfonts-scalable 1:1.0.1-1 scalable fonts for X
-- no debconf information
Feb 1 10:22:00 durandal kernel: imklog 4.4.2, log source = /proc/kmsg started.
Feb 1 10:44:23 durandal kernel: [58890.316052] No probe response from AP 00:02:cf:85:cd:e2 after 500ms, disconnecting.
Feb 1 10:44:23 durandal kernel: [58890.770345] wlan0: direct probe to AP 00:02:cf:85:cd:e2 (try 1)
Feb 1 10:44:23 durandal kernel: [58890.774471] wlan0: direct probe responded
Feb 1 10:44:23 durandal kernel: [58890.774479] wlan0: authenticate with AP 00:02:cf:85:cd:e2 (try 1)
Feb 1 10:44:23 durandal kernel: [58890.781978] wlan0: authenticated
Feb 1 10:44:23 durandal kernel: [58890.782003] wlan0: associate with AP 00:02:cf:85:cd:e2 (try 1)
Feb 1 10:44:23 durandal kernel: [58890.785750] wlan0: RX ReassocResp from 00:02:cf:85:cd:e2 (capab=0x431 status=0 aid=1)
Feb 1 10:44:23 durandal kernel: [58890.785755] wlan0: associated
Feb 1 12:33:03 durandal kernel: [65410.287398] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Feb 1 12:33:03 durandal kernel: [65410.287802] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Feb 1 12:33:13 durandal kernel: [65420.328033] eth0: no IPv6 routers present
Feb 1 12:33:13 durandal kernel: [65420.577054] wlan0: deauthenticating from 00:02:cf:85:cd:e2 by local choice (reason=3)
Feb 1 12:33:13 durandal kernel: [65420.578476] wlan0: direct probe to AP 00:02:cf:85:cd:e2 (try 1)
Feb 1 12:33:13 durandal kernel: [65420.578497] wlan0: deauthenticating from 00:02:cf:85:cd:e2 by local choice (reason=3)
Feb 1 17:28:44 durandal kernel: [83151.348408] usb 5-1.2: USB disconnect, address 25
Feb 1 17:28:44 durandal kernel: [83151.348415] usb 5-1.2.1: USB disconnect, address 26
Feb 1 17:28:44 durandal kernel: [83151.373559] usb 5-1.2.2: USB disconnect, address 27
Feb 1 17:28:48 durandal kernel: [83155.005408] usb 5-1.2: new full speed USB device using uhci_hcd and address 28
Feb 1 17:28:48 durandal kernel: [83155.107396] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb 1 17:28:48 durandal kernel: [83155.115401] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb 1 17:28:48 durandal kernel: [83155.115407] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:28:48 durandal kernel: [83155.115577] usb 5-1.2: configuration #1 chosen from 1 choice
Feb 1 17:28:48 durandal kernel: [83155.118471] hub 5-1.2:1.0: USB hub found
Feb 1 17:28:48 durandal kernel: [83155.120395] hub 5-1.2:1.0: 4 ports detected
Feb 1 17:28:48 durandal kernel: [83155.402412] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 29
Feb 1 17:28:48 durandal kernel: [83155.554404] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb 1 17:28:48 durandal kernel: [83155.554412] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 17:28:48 durandal kernel: [83155.554417] usb 5-1.2.1: Product: USB Optical Mouse
Feb 1 17:28:48 durandal kernel: [83155.554421] usb 5-1.2.1: Manufacturer: Logitech
Feb 1 17:28:48 durandal kernel: [83155.554607] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb 1 17:28:48 durandal kernel: [83155.571878] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input38
Feb 1 17:28:48 durandal kernel: [83155.572105] generic-usb 0003:046D:C046.001C: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb 1 17:28:48 durandal kernel: [83155.654160] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 30
Feb 1 17:28:48 durandal kernel: [83155.773416] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb 1 17:28:48 durandal kernel: [83155.773424] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:28:48 durandal kernel: [83155.773612] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb 1 17:28:48 durandal kernel: [83155.790936] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input39
Feb 1 17:28:48 durandal kernel: [83155.791110] cherry 0003:046A:0023.001D: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb 1 17:28:48 durandal kernel: [83155.813654] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input40
Feb 1 17:28:48 durandal kernel: [83155.813828] cherry 0003:046A:0023.001E: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb 1 17:29:02 durandal kernel: [83169.268405] usb 5-1.2: USB disconnect, address 28
Feb 1 17:29:02 durandal kernel: [83169.268411] usb 5-1.2.1: USB disconnect, address 29
Feb 1 17:29:02 durandal kernel: [83169.300600] usb 5-1.2.2: USB disconnect, address 30
Feb 1 17:29:05 durandal kernel: [83172.797406] usb 5-1.2: new full speed USB device using uhci_hcd and address 31
Feb 1 17:29:05 durandal kernel: [83172.899400] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb 1 17:29:05 durandal kernel: [83172.907406] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb 1 17:29:05 durandal kernel: [83172.907412] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:29:05 durandal kernel: [83172.907582] usb 5-1.2: configuration #1 chosen from 1 choice
Feb 1 17:29:05 durandal kernel: [83172.910485] hub 5-1.2:1.0: USB hub found
Feb 1 17:29:05 durandal kernel: [83172.913042] hub 5-1.2:1.0: 4 ports detected
Feb 1 17:29:06 durandal kernel: [83173.209404] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 32
Feb 1 17:29:06 durandal kernel: [83173.346402] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb 1 17:29:06 durandal kernel: [83173.346409] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 17:29:06 durandal kernel: [83173.346414] usb 5-1.2.1: Product: USB Optical Mouse
Feb 1 17:29:06 durandal kernel: [83173.346418] usb 5-1.2.1: Manufacturer: Logitech
Feb 1 17:29:06 durandal kernel: [83173.346592] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb 1 17:29:06 durandal kernel: [83173.363907] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input41
Feb 1 17:29:06 durandal kernel: [83173.364201] generic-usb 0003:046D:C046.001F: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb 1 17:29:06 durandal kernel: [83173.457410] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 33
Feb 1 17:29:06 durandal kernel: [83173.581456] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb 1 17:29:06 durandal kernel: [83173.581463] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:29:06 durandal kernel: [83173.581644] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb 1 17:29:06 durandal kernel: [83173.598039] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input42
Feb 1 17:29:06 durandal kernel: [83173.598219] cherry 0003:046A:0023.0020: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb 1 17:29:06 durandal kernel: [83173.622342] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input43
Feb 1 17:29:06 durandal kernel: [83173.622522] cherry 0003:046A:0023.0021: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb 1 17:29:13 durandal kernel: [83180.404405] usb 5-1.2: USB disconnect, address 31
Feb 1 17:29:13 durandal kernel: [83180.404411] usb 5-1.2.1: USB disconnect, address 32
Feb 1 17:29:13 durandal kernel: [83180.432607] usb 5-1.2.2: USB disconnect, address 33
Feb 1 17:29:17 durandal kernel: [83184.061401] usb 5-1.2: new full speed USB device using uhci_hcd and address 34
Feb 1 17:29:17 durandal kernel: [83184.163401] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb 1 17:29:17 durandal kernel: [83184.171406] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb 1 17:29:17 durandal kernel: [83184.171412] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:29:17 durandal kernel: [83184.171583] usb 5-1.2: configuration #1 chosen from 1 choice
Feb 1 17:29:17 durandal kernel: [83184.174478] hub 5-1.2:1.0: USB hub found
Feb 1 17:29:17 durandal kernel: [83184.176404] hub 5-1.2:1.0: 4 ports detected
Feb 1 17:29:17 durandal kernel: [83184.473407] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 35
Feb 1 17:29:17 durandal kernel: [83184.610401] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb 1 17:29:17 durandal kernel: [83184.610408] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 17:29:17 durandal kernel: [83184.610413] usb 5-1.2.1: Product: USB Optical Mouse
Feb 1 17:29:17 durandal kernel: [83184.610417] usb 5-1.2.1: Manufacturer: Logitech
Feb 1 17:29:17 durandal kernel: [83184.610589] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb 1 17:29:17 durandal kernel: [83184.627915] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input44
Feb 1 17:29:17 durandal kernel: [83184.628338] generic-usb 0003:046D:C046.0022: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb 1 17:29:17 durandal kernel: [83184.717409] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 36
Feb 1 17:29:17 durandal kernel: [83184.837411] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb 1 17:29:17 durandal kernel: [83184.837417] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 17:29:17 durandal kernel: [83184.837597] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb 1 17:29:17 durandal kernel: [83184.854974] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input45
Feb 1 17:29:17 durandal kernel: [83184.855151] cherry 0003:046A:0023.0023: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb 1 17:29:17 durandal kernel: [83184.877715] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input46
Feb 1 17:29:17 durandal kernel: [83184.877884] cherry 0003:046A:0023.0024: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb 1 17:29:37 durandal kernel: [83203.956418] usb 5-1.2: USB disconnect, address 34
Feb 1 17:29:37 durandal kernel: [83203.956424] usb 5-1.2.1: USB disconnect, address 35
Feb 1 17:29:37 durandal kernel: [83203.981603] usb 5-1.2.2: USB disconnect, address 36
Feb 1 18:13:16 durandal kernel: [85823.677739] usb 5-1.2: new full speed USB device using uhci_hcd and address 37
Feb 1 18:13:16 durandal kernel: [85823.779737] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb 1 18:13:16 durandal kernel: [85823.787740] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb 1 18:13:16 durandal kernel: [85823.787746] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 18:13:16 durandal kernel: [85823.787911] usb 5-1.2: configuration #1 chosen from 1 choice
Feb 1 18:13:16 durandal kernel: [85823.790817] hub 5-1.2:1.0: USB hub found
Feb 1 18:13:16 durandal kernel: [85823.796037] hub 5-1.2:1.0: 4 ports detected
Feb 1 18:13:17 durandal kernel: [85824.077746] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 38
Feb 1 18:13:17 durandal kernel: [85824.215744] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb 1 18:13:17 durandal kernel: [85824.215750] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 18:13:17 durandal kernel: [85824.215755] usb 5-1.2.1: Product: USB Optical Mouse
Feb 1 18:13:17 durandal kernel: [85824.215760] usb 5-1.2.1: Manufacturer: Logitech
Feb 1 18:13:17 durandal kernel: [85824.215920] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb 1 18:13:17 durandal kernel: [85824.233275] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input47
Feb 1 18:13:17 durandal kernel: [85824.233477] generic-usb 0003:046D:C046.0025: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb 1 18:13:17 durandal kernel: [85824.321745] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 39
Feb 1 18:13:17 durandal kernel: [85824.441746] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb 1 18:13:17 durandal kernel: [85824.441752] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 18:13:17 durandal kernel: [85824.441933] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb 1 18:13:17 durandal kernel: [85824.459312] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input48
Feb 1 18:13:17 durandal kernel: [85824.459486] cherry 0003:046A:0023.0026: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb 1 18:13:17 durandal kernel: [85824.482986] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input49
Feb 1 18:13:17 durandal kernel: [85824.483162] cherry 0003:046A:0023.0027: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb 1 18:13:23 durandal kernel: [85830.644743] usb 5-1.2: USB disconnect, address 37
Feb 1 18:13:23 durandal kernel: [85830.644749] usb 5-1.2.1: USB disconnect, address 38
Feb 1 18:13:23 durandal kernel: [85830.680613] usb 5-1.2.2: USB disconnect, address 39
Feb 1 18:13:42 durandal kernel: [85849.021745] usb 5-1.2: new full speed USB device using uhci_hcd and address 40
Feb 1 18:13:42 durandal kernel: [85849.123739] usb 5-1.2: not running at top speed; connect to a high speed hub
Feb 1 18:13:42 durandal kernel: [85849.131742] usb 5-1.2: New USB device found, idVendor=0424, idProduct=2514
Feb 1 18:13:42 durandal kernel: [85849.131748] usb 5-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 18:13:42 durandal kernel: [85849.131916] usb 5-1.2: configuration #1 chosen from 1 choice
Feb 1 18:13:42 durandal kernel: [85849.133825] hub 5-1.2:1.0: USB hub found
Feb 1 18:13:42 durandal kernel: [85849.136100] hub 5-1.2:1.0: 4 ports detected
Feb 1 18:13:42 durandal kernel: [85849.433745] usb 5-1.2.1: new low speed USB device using uhci_hcd and address 41
Feb 1 18:13:42 durandal kernel: [85849.569742] usb 5-1.2.1: New USB device found, idVendor=046d, idProduct=c046
Feb 1 18:13:42 durandal kernel: [85849.569749] usb 5-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 18:13:42 durandal kernel: [85849.569754] usb 5-1.2.1: Product: USB Optical Mouse
Feb 1 18:13:42 durandal kernel: [85849.569758] usb 5-1.2.1: Manufacturer: Logitech
Feb 1 18:13:42 durandal kernel: [85849.569930] usb 5-1.2.1: configuration #1 chosen from 1 choice
Feb 1 18:13:42 durandal kernel: [85849.587252] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.1/5-1.2.1:1.0/input/input50
Feb 1 18:13:42 durandal kernel: [85849.587454] generic-usb 0003:046D:C046.0028: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2.1/input0
Feb 1 18:13:42 durandal kernel: [85849.661749] usb 5-1.2.2: new low speed USB device using uhci_hcd and address 42
Feb 1 18:13:42 durandal kernel: [85849.781750] usb 5-1.2.2: New USB device found, idVendor=046a, idProduct=0023
Feb 1 18:13:42 durandal kernel: [85849.781756] usb 5-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Feb 1 18:13:42 durandal kernel: [85849.781934] usb 5-1.2.2: configuration #1 chosen from 1 choice
Feb 1 18:13:42 durandal kernel: [85849.799313] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.0/input/input51
Feb 1 18:13:42 durandal kernel: [85849.799488] cherry 0003:046A:0023.0029: input,hidraw3: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input0
Feb 1 18:13:42 durandal kernel: [85849.821990] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.1/input/input52
Feb 1 18:13:42 durandal kernel: [85849.822161] cherry 0003:046A:0023.002A: input,hidraw4: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1.2.2/input1
Feb 1 18:14:05 durandal kernel: [85872.466683] [drm] DAC-6: set mode 27
Feb 1 18:14:39 durandal kernel: [85906.036753] usb 5-1.2: USB disconnect, address 40
Feb 1 18:14:39 durandal kernel: [85906.036760] usb 5-1.2.1: USB disconnect, address 41
Feb 1 18:14:39 durandal kernel: [85906.072594] usb 5-1.2.2: USB disconnect, address 42
Reply to: