Package: xserver-xorg-video-intel Version: 2:2.9.1-2 Severity: important When KMS is enabled, sometimes the display will seem to shift to the left or right whilst I'm running X. This happens fairly frequently. Eventually, the display will turn all white, and I will be unable to do anything: the mouse cursor (along with everything else) is gone and changing VTs does not work. I have not tested if the machine is able to be SSHed into. If KMS is not enabled, everything works fine. I don't recall this happening with 2.6.30, but I can't be sure. I do recall it being significantly worse with 2.6.32 than with 2.6.31. I frequently suspend and resume my laptop (I'm a consultant); I am unsure if this only occurs after I have suspended it once or not. I also use compiz as my window manager. If you need me to test whether this behavior occurs without compiz or without suspending, or really anything else, please let me know. -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 May 2 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1865248 Jan 6 17:52 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1859 Jul 14 11:02 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Extensions" Option "Composite" "enable" EndSection Section "ServerFlags" Option "DontZap" "false" Option "DontVTSwitch" "false" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "thinkpad60" Option "XkbLayout" "us" Option "XkbOptions" "ctrl:nocaps,terminate:ctrl_alt_bksp" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection #Section "InputDevice" # Identifier "Synaptics Touchpad" # Driver "synaptics" # Option "SendCoreEvents" "true" # Option "Device" "/dev/psaux" # Option "Protocol" "auto-dev" # Option "HorizScrollDelta" "0" #EndSection Section "Device" Identifier "Configured Video Device" Option "UseFBDev" "true" #Option "AccelMethod" "UXA" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 33168 Dec 3 18:55 /var/log/Xorg.21.log -rw-r--r-- 1 root root 29300 Dec 25 16:32 /var/log/Xorg.20.log -rw-r--r-- 1 root root 61903 Jan 12 00:08 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.7.3.902 (1.7.4 RC 2) Release Date: 2009-12-26 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-trunk-amd64 x86_64 Debian Current Operating System: Linux lakeview 2.6.32-trunk-amd64 #1 SMP Thu Jan 7 17:44:12 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-trunk-amd64 root=/dev/mapper/lakeview-root ro quiet usbcore.autosuspend=1 Build Date: 06 January 2010 05:51:16PM xorg-server 2:1.7.3.902-1 (jcristau@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 11 14:49:25 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (**) Option "DontVTSwitch" "false" (**) Option "DontZap" "false" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Generic Keyboard (WW) Disabling Configured Mouse (II) Loader magic: 0x7c2be0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:27a2:17aa:201a Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xee100000/524288, 0xd0000000/268435456, 0xee200000/262144, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:27a6:17aa:201a Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xee180000/524288 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 00@00:02:0 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM (--) intel(0): Chipset: "945GM" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xEE100000 size 524288 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID for output LVDS (II) intel(0): Manufacturer: LEN Model: 4040 Serial#: 0 (II) intel(0): Year: 2005 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.590 redY: 0.342 greenX: 0.319 greenY: 0.540 (II) intel(0): blueX: 0.152 blueY: 0.137 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 54.2 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): LTN150XF-L03 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030ae404000000000 (II) intel(0): 000f0103801e1778ea2d059757518a27 (II) intel(0): 23505421080001010101010101010101 (II) intel(0): 01010101010164190040410026301888 (II) intel(0): 360030e4100000192815004041002630 (II) intel(0): 1888360030e4100000190000000f0061 (II) intel(0): 43326143280f01004ca35846000000fe (II) intel(0): 004c544e31353058462d4c30330a007a (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): Output TV has no monitor section (II) intel(0): EDID for output VGA (II) intel(0): EDID for output LVDS (II) intel(0): Manufacturer: LEN Model: 4040 Serial#: 0 (II) intel(0): Year: 2005 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): GTF timings supported (II) intel(0): redX: 0.590 redY: 0.342 greenX: 0.319 greenY: 0.540 (II) intel(0): blueX: 0.152 blueY: 0.137 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 54.2 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, (II) intel(0): LTN150XF-L03 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030ae404000000000 (II) intel(0): 000f0103801e1778ea2d059757518a27 (II) intel(0): 23505421080001010101010101010101 (II) intel(0): 01010101010164190040410026301888 (II) intel(0): 360030e4100000192815004041002630 (II) intel(0): 1888360030e4100000190000000f0061 (II) intel(0): 43326143280f01004ca35846000000fe (II) intel(0): 004c544e31353058462d4c30330a007a (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x50.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): EDID for output TV (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TV disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1024x768 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400 (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000 (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104 (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200 (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200 (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1 (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359 (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022 (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344 (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415 (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607 (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001 (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0 (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0 (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087 (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140 (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024 (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198 (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283 (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141 (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060 (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000 (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060 (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 734464 total, 1 used (II) intel(0): I830CheckAvailableMemory: 2937852 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x00000000bf800000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x00000000bfe00000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x00000000bfe0b000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "UseFBDev" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server record: RECORD extension enabled at configure time. record: This extension is known to be broken, disabling extension now.. record: http://bugs.freedesktop.org/show_bug.cgi?id=20500 (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/udev: Adding input device "Power Button" (/dev/input/event4) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) "Power Button": always reports core events (**) "Power Button": Device: "/dev/input/event4" (II) "Power Button": Found keys (II) "Power Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "Video Bus" (/dev/input/event5) (**) "Video Bus": always reports core events (**) "Video Bus": Device: "/dev/input/event5" (II) "Video Bus": Found keys (II) "Video Bus": Configuring as keyboard (II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "Lid Switch" (/dev/input/event2) (**) "Lid Switch": always reports core events (**) "Lid Switch": Device: "/dev/input/event2" (WW) "Lid Switch": Don't know how to use device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Lid Switch"" (II) config/udev: Adding input device "Sleep Button" (/dev/input/event3) (**) "Sleep Button": always reports core events (**) "Sleep Button": Device: "/dev/input/event3" (II) "Sleep Button": Found keys (II) "Sleep Button": Configuring as keyboard (II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "HDA Digital PCBeep" (/dev/input/event9) (**) "HDA Digital PCBeep": always reports core events (**) "HDA Digital PCBeep": Device: "/dev/input/event9" (WW) "HDA Digital PCBeep": Don't know how to use device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""HDA Digital PCBeep"" (II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event6) (**) "Logitech USB Optical Mouse": always reports core events (**) "Logitech USB Optical Mouse": Device: "/dev/input/event6" (II) "Logitech USB Optical Mouse": Found 12 mouse buttons (II) "Logitech USB Optical Mouse": Found scroll wheel(s) (II) "Logitech USB Optical Mouse": Found relative axes (II) "Logitech USB Optical Mouse": Found x and y relative axes (II) "Logitech USB Optical Mouse": Configuring as mouse (**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5 (**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE) (**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1 (**) "Logitech USB Optical Mouse": (accel) acceleration profile 0 (II) "Logitech USB Optical Mouse": initialized for relative axes. (II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse1) (**) "Logitech USB Optical Mouse": always reports core events (**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse1" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Logitech USB Optical Mouse"" (II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1) (**) "AT Translated Set 2 keyboard": always reports core events (**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1" (II) "AT Translated Set 2 keyboard": Found keys (II) "AT Translated Set 2 keyboard": Configuring as keyboard (II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/event7) (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.1 (**) Option "Device" "/dev/input/event7" (II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472 (II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448 (II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255 (II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0 (II) "SynPS/2 Synaptics TouchPad": buttons: left right middle double triple (--) "SynPS/2 Synaptics TouchPad": touchpad found (**) "SynPS/2 Synaptics TouchPad": always reports core events (II) XINPUT: Adding extended input device ""SynPS/2 Synaptics TouchPad"" (type: TOUCHPAD) (**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1 (**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0 (--) "SynPS/2 Synaptics TouchPad": touchpad found (II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad" (/dev/input/mouse2) (**) "SynPS/2 Synaptics TouchPad": always reports core events (**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse2" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad"" (II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/event10) (**) "PS/2 Generic Mouse": always reports core events (**) "PS/2 Generic Mouse": Device: "/dev/input/event10" (II) "PS/2 Generic Mouse": Found 3 mouse buttons (II) "PS/2 Generic Mouse": Found relative axes (II) "PS/2 Generic Mouse": Found x and y relative axes (II) "PS/2 Generic Mouse": Configuring as mouse (**) "PS/2 Generic Mouse": YAxisMapping: buttons 4 and 5 (**) "PS/2 Generic Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""PS/2 Generic Mouse"" (type: MOUSE) (**) "PS/2 Generic Mouse": (accel) keeping acceleration scheme 1 (**) "PS/2 Generic Mouse": (accel) acceleration profile 0 (II) "PS/2 Generic Mouse": initialized for relative axes. (II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/mouse3) (**) "PS/2 Generic Mouse": always reports core events (**) "PS/2 Generic Mouse": Device: "/dev/input/mouse3" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""PS/2 Generic Mouse"" (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0) (**) "Macintosh mouse button emulation": always reports core events (**) "Macintosh mouse button emulation": Device: "/dev/input/event0" (II) "Macintosh mouse button emulation": Found 3 mouse buttons (II) "Macintosh mouse button emulation": Found relative axes (II) "Macintosh mouse button emulation": Found x and y relative axes (II) "Macintosh mouse button emulation": Configuring as mouse (**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5 (**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE) (**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1 (**) "Macintosh mouse button emulation": (accel) acceleration profile 0 (II) "Macintosh mouse button emulation": initialized for relative axes. (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0) (**) "Macintosh mouse button emulation": always reports core events (**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Macintosh mouse button emulation"" (II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event11) (**) "ACPI Virtual Keyboard Device": always reports core events (**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event11" (II) "ACPI Virtual Keyboard Device": Found keys (II) "ACPI Virtual Keyboard Device": Configuring as keyboard (II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "/usr/sbin/thinkpad-keys" (/dev/input/event12) (**) "/usr/sbin/thinkpad-keys": always reports core events (**) "/usr/sbin/thinkpad-keys": Device: "/dev/input/event12" (II) "/usr/sbin/thinkpad-keys": Found keys (II) "/usr/sbin/thinkpad-keys": Configuring as keyboard (II) XINPUT: Adding extended input device ""/usr/sbin/thinkpad-keys"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) config/udev: Adding input device "ThinkPad Extra Buttons" (/dev/input/event8) (**) "ThinkPad Extra Buttons": always reports core events (**) "ThinkPad Extra Buttons": Device: "/dev/input/event8" (II) "ThinkPad Extra Buttons": Found keys (II) "ThinkPad Extra Buttons": Configuring as keyboard (II) XINPUT: Adding extended input device ""ThinkPad Extra Buttons"" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "ctrl:nocaps,terminate:ctrl_alt_bksp" (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) AIGLX: Suspending AIGLX clients for VT switch (II) config/udev: removing device "Logitech USB Optical Mouse" (II) "Logitech USB Optical Mouse": Close (II) UnloadModule: "evdev" (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x00000000bf800000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x00000000bfe00000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x00000000bfe0b000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (--) "SynPS/2 Synaptics TouchPad": touchpad found (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "PS/2 Generic Mouse": Device reopened after 1 attempts. (II) "Macintosh mouse button emulation": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) "/usr/sbin/thinkpad-keys": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/event6) (**) "Logitech USB Optical Mouse": always reports core events (**) "Logitech USB Optical Mouse": Device: "/dev/input/event6" (II) "Logitech USB Optical Mouse": Found 12 mouse buttons (II) "Logitech USB Optical Mouse": Found scroll wheel(s) (II) "Logitech USB Optical Mouse": Found relative axes (II) "Logitech USB Optical Mouse": Found x and y relative axes (II) "Logitech USB Optical Mouse": Configuring as mouse (**) "Logitech USB Optical Mouse": YAxisMapping: buttons 4 and 5 (**) "Logitech USB Optical Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device ""Logitech USB Optical Mouse"" (type: MOUSE) (**) "Logitech USB Optical Mouse": (accel) keeping acceleration scheme 1 (**) "Logitech USB Optical Mouse": (accel) acceleration profile 0 (II) "Logitech USB Optical Mouse": initialized for relative axes. (II) config/udev: Adding input device "Logitech USB Optical Mouse" (/dev/input/mouse1) (**) "Logitech USB Optical Mouse": always reports core events (**) "Logitech USB Optical Mouse": Device: "/dev/input/mouse1" (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device (II) UnloadModule: "evdev" (EE) PreInit returned NULL for ""Logitech USB Optical Mouse"" (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x00000000bf800000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x00000000bfe00000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x00000000bfe0b000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (--) "SynPS/2 Synaptics TouchPad": touchpad found (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "PS/2 Generic Mouse": Device reopened after 1 attempts. (II) "Macintosh mouse button emulation": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) "/usr/sbin/thinkpad-keys": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) "Logitech USB Optical Mouse": Device reopened after 1 attempts. (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x00000000bf800000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x00000000bfe00000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x00000000bfe0b000 physical ) (II) intel(0): 0x007bf000: end of stolen memory (II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x007bf000: start of memory manager (II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (II) intel(0): using SSC reference clock of 100 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (--) "SynPS/2 Synaptics TouchPad": touchpad found (II) "Power Button": Device reopened after 1 attempts. (II) "Video Bus": Device reopened after 1 attempts. (II) "Sleep Button": Device reopened after 1 attempts. (II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts. (II) "PS/2 Generic Mouse": Device reopened after 1 attempts. (II) "Macintosh mouse button emulation": Device reopened after 1 attempts. (II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts. (II) "/usr/sbin/thinkpad-keys": Device reopened after 1 attempts. (II) "ThinkPad Extra Buttons": Device reopened after 1 attempts. (II) "Logitech USB Optical Mouse": Device reopened after 1 attempts. (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): EDID vendor "LEN", prod id 16448 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x0.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID vendor "LEN", prod id 16448 udev information: P: /devices/virtual/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:64 P: /devices/platform/i8042/serio0/input/input1/event1 N: input/event1 S: char/13:65 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/platform/i8042/serio1/serio2/input/input10/event10 N: input/event10 S: char/13:74 S: input/by-path/platform-i8042-serio-2-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input10/event10 E: MAJOR=13 E: MINOR=74 E: DEVNAME=/dev/input/event10 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-2 E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:74 /dev/input/by-path/platform-i8042-serio-2-event-mouse P: /devices/virtual/input/input11/event11 N: input/event11 S: char/13:75 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input11/event11 E: MAJOR=13 E: MINOR=75 E: DEVNAME=/dev/input/event11 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:75 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/virtual/input/input12/event12 N: input/event12 S: char/13:76 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input12/event12 E: MAJOR=13 E: MINOR=76 E: DEVNAME=/dev/input/event12 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:76 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2 N: input/event2 S: char/13:66 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:66 P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:67 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 N: input/event4 S: char/13:68 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:68 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5 N: input/event5 S: char/13:69 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:69 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input13/event6 N: input/event6 S: char/13:70 S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input13/event6 E: MAJOR=13 E: MINOR=70 E: DEVNAME=/dev/input/event6 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Optical_Mouse E: ID_MODEL_ENC=USB\x20Optical\x20Mouse E: ID_MODEL_ID=c019 E: ID_REVISION=4301 E: ID_SERIAL=Logitech_USB_Optical_Mouse E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0 E: x11_driver=evdev E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse P: /devices/platform/i8042/serio1/input/input7/event7 N: input/event7 S: char/13:71 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7 E: MAJOR=13 E: MINOR=71 E: DEVNAME=/dev/input/event7 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: x11_driver=synaptics E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/virtual/input/input8/event8 N: input/event8 S: char/13:72 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input8/event8 E: MAJOR=13 E: MINOR=72 E: DEVNAME=/dev/input/event8 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:72 E: XKBOPTIONS=ctrl:nocaps,terminate:ctrl_alt_bksp E: x11_driver=evdev E: DMI_VENDOR=LENOVO P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9 N: input/event9 S: char/13:73 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9 E: MAJOR=13 E: MINOR=73 E: DEVNAME=/dev/input/event9 E: SUBSYSTEM=input E: ID_INPUT=1 E: x11_driver=evdev E: DMI_VENDOR=LENOVO E: DEVLINKS=/dev/char/13:73 DRM Information from dmesg: [ 0.733882] Linux agpgart interface v0.103 [ 2.377042] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 2.378152] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 2.381670] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 28.254229] [drm] Initialized drm 1.1.0 20060810 [ 28.327692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-video-intel depends on: ii libc6 2.10.2-5 Embedded GNU C Library: Shared lib ii libdrm-intel1 2.4.15-1 Userspace interface to intel-speci ii libdrm2 2.4.15-1 Userspace interface to kernel DRM ii libpciaccess0 0.10.9-1 Generic PCI access library for X ii libxext6 2:1.1.1-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.4-1 X11 miscellaneous 'fixes' extensio ii libxv1 2:1.0.5-1 X11 Video extension library ii libxvmc1 2:1.0.5-1 X11 Video extension library ii xserver-xorg-core 2:1.7.3.902-1 Xorg X server - core server xserver-xorg-video-intel recommends no packages. xserver-xorg-video-intel suggests no packages. -- no debconf information -- brian m. carlson / brian with sandals: Houston, Texas, US +1 713 440 7475 | http://crustytoothpaste.ath.cx/~bmc | My opinion only OpenPGP: RSA v4 4096b 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187
Attachment:
signature.asc
Description: Digital signature