[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#550981: DRM output from dmesg for i915:modeset=1



The previous information was from a successful (X starts w/1152x864)
run.  Below is the relevant DRM info from the unsuccessful (1024x768)
run, with complete dmesg and X log info attached:

1.519615] [drm] Initialized drm 1.1.0 20060810
[    1.540354] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[    1.540364] i915 0000:00:02.0: setting latency timer to 64
[    1.644057] i915 0000:00:02.0: LVDS-1: no EDID data
[    2.088054] i915 0000:00:02.0: LVDS-1: no EDID data
[    2.631035] allocated 1440x900 fb: 0x007df000, bo ef46a840
[    2.632303] Console: switching to colour frame buffer device 128x48
[    2.705621] [drm] TMDS-11: set mode 1440x900 22
[    2.999161] [drm] LVDS-8: set mode 1024x768 c
[    3.009164] fb0: inteldrmfb frame buffer device
[    3.009169] registered panic notifier
[    3.009181] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-2-686 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Sat Sep 26 01:16:22 UTC 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
[    0.000000]  BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 0C0000000 write-back
[    0.000000]   1 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2f2c7000 - 2f9f77d8
[    0.000000] ACPI: RSDP 000fba60 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 3f7a0100 00054 (v01 A_M_I_ OEMXSDT  10000815 MSFT 00000097)
[    0.000000] ACPI: FACP 3f7a0290 000F4 (v03 A_M_I_ OEMFACP  10000815 MSFT 00000097)
[    0.000000] ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000820/0 [20090320]
[    0.000000] ACPI Warning (tbfadt-0612): Invalid length for Pm2ControlBlock: 0, using default 8 [20090320]
[    0.000000] ACPI: DSDT 3f7a05b0 047CA (v01  A0990 A0990000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 3f7ae000 00040
[    0.000000] ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC  10000815 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG  10000815 MSFT 00000097)
[    0.000000] ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM  10000815 MSFT 00000097)
[    0.000000] ACPI: HPET 3f7a4d80 00038 (v01 A_M_I_ OEMHPET  10000815 MSFT 00000097)
[    0.000000] ACPI: SSDT 3f7ae9f0 004F0 (v01  PmRef    CpuPm 00003000 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 0000541b10]    TEXT DATA BSS ==> [0000100000 - 0000541b10]
[    0.000000]   #4 [002f2c7000 - 002f9f77d8]          RAMDISK ==> [002f2c7000 - 002f9f77d8]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000542000 - 000054422c]              BRK ==> [0000542000 - 000054422c]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f7a0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f7a0
[    0.000000] On node 0 totalpages: 259887
[    0.000000] free_area_init_node: node 0, pgdat c040bd40, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 256 pages used for memmap
[    0.000000]   HighMem zone: 32418 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 11 pages at c17f4000, static data 22172 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257855
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-686 root=UUID=34d845d6-948f-4571-b2f4-79d2b869efeb ro video=i915:modeset=1 quiet
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] NR_IRQS:1280
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1607.992 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Initializing HighMem for node 0 (000377fe:0003f7a0)
[    0.004000] Memory: 1018360k/1040000k available (2173k kernel code, 20788k reserved, 1150k data, 320k init, 130696k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.004000]       .init : 0xc0446000 - 0xc0496000   ( 320 kB)
[    0.004000]       .data : 0xc031f73d - 0xc043f2f0   (1150 kB)
[    0.004000]       .text : 0xc0100000 - 0xc031f73d   (2173 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.98 BogoMIPS (lpj=6431968)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] Intel machine check architecture supported.
[    0.004000] Intel machine check reporting enabled on CPU#0.
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.017425] ACPI: Core revision 20090320
[    0.028562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.071590] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4502.29 BogoMIPS (lpj=9004590)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] Intel machine check architecture supported.
[    0.004000] Intel machine check reporting enabled on CPU#1.
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.156930] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.156964] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.160086] Brought up 2 CPUs
[    0.160095] Total of 2 processors activated (7718.27 BogoMIPS).
[    0.160161] CPU0 attaching sched-domain:
[    0.160167]  domain 0: span 0-1 level SIBLING
[    0.160172]   groups: 0 1
[    0.160181] CPU1 attaching sched-domain:
[    0.160186]  domain 0: span 0-1 level SIBLING
[    0.160191]   groups: 1 0
[    0.160320] net_namespace: 1088 bytes
[    0.160320] Booting paravirtualized kernel on bare hardware
[    0.160389] regulator: core version 0.5
[    0.160389] NET: Registered protocol family 16
[    0.160389] ACPI: bus type pci registered
[    0.160389] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.160389] PCI: Not using MMCONFIG.
[    0.164011] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.164016] PCI: Using configuration type 1 for base access
[    0.164127] bio: create slab <bio-0> at 0
[    0.168345] ACPI: EC: Look up EC in DSDT
[    0.180938] ACPI: Interpreter enabled
[    0.180952] ACPI: (supports S0 S1 S3 S4 S5)
[    0.181003] ACPI: Using IOAPIC for interrupt routing
[    0.181118] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.196305] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.196313] PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[    0.196318] PCI: Using MMCONFIG for extended config space
[    0.208338] ACPI: No dock devices found.
[    0.208458] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.208545] pci 0000:00:02.0: reg 10 32bit mmio: [0xfeb80000-0xfebfffff]
[    0.208545] pci 0000:00:02.0: reg 14 io port: [0xec80-0xec87]
[    0.208545] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[    0.208545] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfeb40000-0xfeb7ffff]
[    0.208545] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[    0.208545] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb38000-0xfeb3bfff]
[    0.208545] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.208545] pci 0000:00:1b.0: PME# disabled
[    0.208545] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.208545] pci 0000:00:1c.0: PME# disabled
[    0.208598] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.208605] pci 0000:00:1c.1: PME# disabled
[    0.208709] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.208717] pci 0000:00:1c.2: PME# disabled
[    0.208796] pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
[    0.208881] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f]
[    0.208975] pci 0000:00:1d.2: reg 20 io port: [0xe880-0xe89f]
[    0.209055] pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
[    0.209136] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb3fc00-0xfeb3ffff]
[    0.209208] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.209216] pci 0000:00:1d.7: PME# disabled
[    0.209406] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.209415] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.209423] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[    0.209431] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[    0.209439] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[    0.209520] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.209532] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.209544] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.209556] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.209568] pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
[    0.209610] pci 0000:00:1f.2: PME# supported from D3hot
[    0.209618] pci 0000:00:1f.2: PME# disabled
[    0.209690] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.209804] pci 0000:04:00.0: reg 10 io port: [0xdc00-0xdcff]
[    0.209836] pci 0000:04:00.0: reg 18 64bit mmio: [0xfe8ff000-0xfe8fffff]
[    0.209860] pci 0000:04:00.0: reg 20 64bit mmio: [0xbfef0000-0xbfefffff]
[    0.209875] pci 0000:04:00.0: reg 30 32bit mmio: [0xfe8c0000-0xfe8dffff]
[    0.212051] pci 0000:04:00.0: supports D1 D2
[    0.212057] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212066] pci 0000:04:00.0: PME# disabled
[    0.212159] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.212168] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[    0.212181] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xbfe00000-0xbfefffff]
[    0.212256] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe7f0000-0xfe7fffff]
[    0.212359] pci 0000:03:00.0: PME# supported from D0 D3hot
[    0.212368] pci 0000:03:00.0: PME# disabled
[    0.212450] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[    0.212525] pci 0000:00:1c.2: bridge io port: [0xc000-0xcfff]
[    0.212534] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa700000-0xfe6fffff]
[    0.212546] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xbbe00000-0xbfdfffff]
[    0.212621] pci 0000:00:1e.0: transparent bridge
[    0.212665] pci_bus 0000:00: on NUMA node 0
[    0.212681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.212920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.213036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.213141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.213274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.232199] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.232431] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.232658] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.232884] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.233110] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.233338] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.233566] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.233793] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.236107] PCI: Using ACPI for IRQ routing
[    0.252037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.252050] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.277064] pnp: PnP ACPI init
[    0.277087] ACPI: bus type pnp registered
[    0.282369] pnp: PnP ACPI: found 12 devices
[    0.282375] ACPI: ACPI bus type pnp unregistered
[    0.282383] PnPBIOS: Disabled by ACPI PNP
[    0.282407] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.282424] system 00:06: ioport range 0x290-0x297 has been reserved
[    0.282444] system 00:07: ioport range 0x25c-0x25f has been reserved
[    0.282452] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.282459] system 00:07: ioport range 0x800-0x87f has been reserved
[    0.282466] system 00:07: ioport range 0x480-0x4bf has been reserved
[    0.282474] system 00:07: iomem range 0x8c000000-0x8c01ffff has been reserved
[    0.282482] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.282489] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.282497] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[    0.282504] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.282511] system 00:07: iomem range 0xfff00000-0xffffffff has been reserved
[    0.282525] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.282533] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.282545] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved
[    0.282557] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.282564] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.282571] system 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
[    0.319902] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[    0.319912] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.319923] pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
[    0.319932] pci 0000:00:1c.0:   PREFETCH window: 0x000000bfe00000-0x000000bfefffff
[    0.319945] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.319949] pci 0000:00:1c.1:   IO window: disabled
[    0.319959] pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
[    0.319966] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.319978] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:01
[    0.319985] pci 0000:00:1c.2:   IO window: 0xc000-0xcfff
[    0.319995] pci 0000:00:1c.2:   MEM window: 0xfa700000-0xfe6fffff
[    0.320006] pci 0000:00:1c.2:   PREFETCH window: 0x000000bbe00000-0x000000bfdfffff
[    0.320019] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[    0.320023] pci 0000:00:1e.0:   IO window: disabled
[    0.320032] pci 0000:00:1e.0:   MEM window: disabled
[    0.320039] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.320072] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.320082] pci 0000:00:1c.0: setting latency timer to 64
[    0.320099] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.320107] pci 0000:00:1c.1: setting latency timer to 64
[    0.320123] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.320131] pci 0000:00:1c.2: setting latency timer to 64
[    0.320144] pci 0000:00:1e.0: setting latency timer to 64
[    0.320154] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.320160] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.320166] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.320173] pci_bus 0000:04: resource 1 mem: [0xfe800000-0xfe8fffff]
[    0.320179] pci_bus 0000:04: resource 2 pref mem [0xbfe00000-0xbfefffff]
[    0.320186] pci_bus 0000:03: resource 1 mem: [0xfe700000-0xfe7fffff]
[    0.320192] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.320198] pci_bus 0000:01: resource 1 mem: [0xfa700000-0xfe6fffff]
[    0.320204] pci_bus 0000:01: resource 2 pref mem [0xbbe00000-0xbfdfffff]
[    0.320211] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.320217] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.320344] NET: Registered protocol family 2
[    0.365202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.365890] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.366839] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.367324] TCP: Hash tables configured (established 131072 bind 65536)
[    0.367330] TCP reno registered
[    0.377270] NET: Registered protocol family 1
[    0.377382] Trying to unpack rootfs image as initramfs...
[    0.501071] Switched to high resolution mode on CPU 1
[    0.504022] Switched to high resolution mode on CPU 0
[    0.739263] Freeing initrd memory: 7361k freed
[    0.748936] audit: initializing netlink socket (disabled)
[    0.748960] type=2000 audit(1255527986.745:1): initialized
[    0.749350] highmem bounce pool size: 64 pages
[    0.749360] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.749561] VFS: Disk quotas dquot_6.5.2
[    0.749627] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.749745] msgmni has been set to 1748
[    0.750069] alg: No test for stdrng (krng)
[    0.750204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.750211] io scheduler noop registered
[    0.750216] io scheduler anticipatory registered
[    0.750220] io scheduler deadline registered
[    0.750258] io scheduler cfq registered (default)
[    0.750281] pci 0000:00:02.0: Boot video device
[    0.750687] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.750711] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.751103] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.751127] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.751512] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.751535] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.752414] isapnp: Scanning for PnP cards...
[    1.246794] isapnp: No Plug & Play device found
[    1.253918] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.258471] brd: module loaded
[    1.258794] PNP: No PS/2 controller found. Probing ports directly.
[    1.261780] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.261794] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.262113] mice: PS/2 mouse device common for all mice
[    1.262247] rtc_cmos 00:03: RTC can wake from S4
[    1.262373] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.262417] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.262495] cpuidle: using governor ladder
[    1.262501] cpuidle: using governor menu
[    1.262510] No iBFT detected.
[    1.263321] TCP cubic registered
[    1.263425] NET: Registered protocol family 10
[    1.264410] lo: Disabled Privacy Extensions
[    1.265108] Mobile IPv6
[    1.265116] NET: Registered protocol family 17
[    1.265132] Using IPI No-Shortcut mode
[    1.265491] registered taskstats version 1
[    1.265756] rtc_cmos 00:03: setting system clock to 2009-10-14 13:46:27 UTC (1255527987)
[    1.265864] Freeing unused kernel memory: 320k freed
[    1.266101] Write protecting the kernel text: 2176k
[    1.266138] Write protecting the kernel read-only data: 784k
[    1.452812] Linux agpgart interface v0.103
[    1.458456] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.458673] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.461425] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.486612] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input0
[    1.486628] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.519615] [drm] Initialized drm 1.1.0 20060810
[    1.540354] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.540364] i915 0000:00:02.0: setting latency timer to 64
[    1.644057] i915 0000:00:02.0: LVDS-1: no EDID data
[    2.088054] i915 0000:00:02.0: LVDS-1: no EDID data
[    2.631035] allocated 1440x900 fb: 0x007df000, bo ef46a840
[    2.632303] Console: switching to colour frame buffer device 128x48
[    2.705621] [drm] TMDS-11: set mode 1440x900 22
[    2.999161] [drm] LVDS-8: set mode 1024x768 c
[    3.009164] fb0: inteldrmfb frame buffer device
[    3.009169] registered panic notifier
[    3.009181] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.028214] device-mapper: uevent: version 1.0.3
[    3.028433] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    3.271979] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.272016] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.272049] r8169 0000:04:00.0: setting latency timer to 64
[    3.272198] r8169 0000:04:00.0: irq 27 for MSI/MSI-X
[    3.273985] eth0: RTL8168c/8111c at 0xf857e000, 00:22:15:d2:3d:7d, XID 3c4000c0 IRQ 27
[    3.309851] usbcore: registered new interface driver usbfs
[    3.309927] usbcore: registered new interface driver hub
[    3.310036] usbcore: registered new device driver usb
[    3.344196] SCSI subsystem initialized
[    3.370982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.371055] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.371109] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.371120] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.371252] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.375208] ehci_hcd 0000:00:1d.7: debug port 1
[    3.375226] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.375273] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb3fc00
[    3.388099] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.388185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.388195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.388203] usb usb1: Product: EHCI Host Controller
[    3.388211] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd
[    3.388218] usb usb1: SerialNumber: 0000:00:1d.7
[    3.388424] usb usb1: configuration #1 chosen from 1 choice
[    3.388520] hub 1-0:1.0: USB hub found
[    3.388543] hub 1-0:1.0: 8 ports detected
[    3.431048] uhci_hcd: USB Universal Host Controller Interface driver
[    3.431157] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.431177] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.431187] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.431268] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.431317] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[    3.431421] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.431430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.431438] usb usb2: Product: UHCI Host Controller
[    3.431445] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    3.431452] usb usb2: SerialNumber: 0000:00:1d.0
[    3.431624] usb usb2: configuration #1 chosen from 1 choice
[    3.431717] hub 2-0:1.0: USB hub found
[    3.431739] hub 2-0:1.0: 2 ports detected
[    3.432088] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.432108] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.432118] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.432198] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.432267] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[    3.432379] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.432389] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.432397] usb usb3: Product: UHCI Host Controller
[    3.432404] usb usb3: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    3.432412] usb usb3: SerialNumber: 0000:00:1d.1
[    3.432592] usb usb3: configuration #1 chosen from 1 choice
[    3.432684] hub 3-0:1.0: USB hub found
[    3.432705] hub 3-0:1.0: 2 ports detected
[    3.433031] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.433053] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.433063] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.433131] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.433202] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[    3.433311] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.433321] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.433328] usb usb4: Product: UHCI Host Controller
[    3.433335] usb usb4: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    3.433342] usb usb4: SerialNumber: 0000:00:1d.2
[    3.433513] usb usb4: configuration #1 chosen from 1 choice
[    3.433605] hub 4-0:1.0: USB hub found
[    3.433625] hub 4-0:1.0: 2 ports detected
[    3.433937] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    3.433955] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    3.433966] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.434042] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.434088] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[    3.434186] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.434196] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.434204] usb usb5: Product: UHCI Host Controller
[    3.434211] usb usb5: Manufacturer: Linux 2.6.30-2-686 uhci_hcd
[    3.434218] usb usb5: SerialNumber: 0000:00:1d.3
[    3.434378] usb usb5: configuration #1 chosen from 1 choice
[    3.434466] hub 5-0:1.0: USB hub found
[    3.434487] hub 5-0:1.0: 2 ports detected
[    3.623449] libata version 3.00 loaded.
[    3.632666] ata_piix 0000:00:1f.2: version 2.13
[    3.632706] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.632720] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.632810] ata_piix 0000:00:1f.2: setting latency timer to 64
[    3.633110] scsi0 : ata_piix
[    3.648478] scsi1 : ata_piix
[    3.652513] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    3.652525] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    3.812024] usb 1-6: new high speed USB device using ehci_hcd and address 4
[    3.828362] ata1.00: ATA-8: ST9160827AS, 3.AAA, max UDMA/133
[    3.828370] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.844390] ata1.00: configured for UDMA/133
[    3.844593] scsi 0:0:0:0: Direct-Access     ATA      ST9160827AS      3.AA PQ: 0 ANSI: 5
[    3.954875] usb 1-6: New USB device found, idVendor=0bda, idProduct=0158
[    3.954884] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.954890] usb 1-6: Product: USB2.0-CRW
[    3.954894] usb 1-6: Manufacturer: Generic
[    3.954899] usb 1-6: SerialNumber: 20071114173400000
[    3.955047] usb 1-6: configuration #1 chosen from 1 choice
[    3.977026] Initializing USB Mass Storage driver...
[    3.979046] scsi2 : SCSI emulation for USB Mass Storage devices
[    3.979303] usbcore: registered new interface driver usb-storage
[    3.979313] USB Mass Storage support registered.
[    3.979327] usb-storage: device found at 4
[    3.979332] usb-storage: waiting for device to settle before scanning
[    4.028823] Uniform Multi-Platform E-IDE driver
[    4.053250] Driver 'sd' needs updating - please use bus_type methods
[    4.053539] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    4.053596] sd 0:0:0:0: [sda] Write Protect is off
[    4.053606] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.053694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.054031]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    4.167396] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.200127] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    4.376447] usb 2-1: New USB device found, idVendor=0603, idProduct=00f2
[    4.376455] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.376462] usb 2-1: Product: USB Keyboard
[    4.376466] usb 2-1: Manufacturer: NOVATEK
[    4.376628] usb 2-1: configuration #1 chosen from 1 choice
[    4.409407] usbcore: registered new interface driver hiddev
[    4.425036] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[    4.425157] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input0
[    4.461643] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[    4.461817] generic-usb 0003:0603:00F2.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1/input1
[    4.461854] usbcore: registered new interface driver usbhid
[    4.461860] usbhid: v2.6:USB HID core driver
[    4.616100] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    4.788467] usb 2-2: New USB device found, idVendor=0458, idProduct=0007
[    4.788475] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.788482] usb 2-2: Product: Optical Mouse
[    4.788487] usb 2-2: Manufacturer:  KYE  
[    4.788657] usb 2-2: configuration #1 chosen from 1 choice
[    4.804975] input:  KYE   Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[    4.805135] generic-usb 0003:0458:0007.0003: input,hidraw2: USB HID v1.10 Mouse [ KYE   Optical Mouse] on usb-0000:00:1d.0-2/input0
[    5.165050] PM: Starting manual resume from disk
[    5.246190] kjournald starting.  Commit interval 5 seconds
[    5.246209] EXT3-fs: mounted filesystem with journal data mode.
[    6.840408] udev: starting version 141
[    7.104348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.104469] ACPI: Power Button [PWRF]
[    7.104702] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    7.104783] ACPI: Power Button [PWRB]
[    7.117507] ACPI: SSDT 3f7ae180 0023C (v01  PmRef  Cpu0Ist 00003000 INTL 20060113)
[    7.118338] ACPI: SSDT 3f7ae450 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20060113)
[    7.119931] Monitor-Mwait will be used to enter C-1 state
[    7.120074] Monitor-Mwait will be used to enter C-2 state
[    7.120138] Monitor-Mwait will be used to enter C-3 state
[    7.120164] Marking TSC unstable due to TSC halts in idle
[    7.120352] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    7.120444] processor ACPI_CPU:00: registered as cooling_device0
[    7.120460] ACPI: Processor [P001] (supports 8 throttling states)
[    7.121478] ACPI: SSDT 3f7ae0b0 000CC (v01  PmRef  Cpu1Ist 00003000 INTL 20060113)
[    7.122253] ACPI: SSDT 3f7ae3c0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060113)
[    7.150708] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    7.150784] processor ACPI_CPU:01: registered as cooling_device1
[    7.150797] ACPI: Processor [P002] (supports 8 throttling states)
[    7.283652] eeepc: Eee PC Hotkey Driver
[    7.283989] eeepc: Hotkey init flags 0x41
[    7.284258] eeepc: Get control methods supported: 0x0
[    7.284537] input: Asus EeePC extra buttons as /devices/virtual/input/input6
[    7.645753] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.655800] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    7.698724] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[    7.705868] rt2860 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.706439] 
[    7.706442] 
[    7.706444] === pAd = f8f4f000, size = 580808 ===
[    7.706447] 
[    7.706454] <-- RTMPAllocAdapterBlock, Status=0
[    7.706565] rt2860 0000:03:00.0: setting latency timer to 64
[    7.721513] intel_rng: FWH not detected
[    8.256252] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.256337] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.976372] usb-storage: device scan complete
[    8.978353] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    8.981635] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    9.684015] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
[    9.684033] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[    9.684320] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   10.258793] Adding 1951856k swap on /dev/sda7.  Priority:-1 extents:1 across:1951856k 
[   10.419465] EXT3 FS on sda1, internal journal
[   10.609896] loop: module loaded
[  178.173250] kjournald starting.  Commit interval 5 seconds
[  178.173643] EXT3 FS on sda9, internal journal
[  178.173661] EXT3-fs: mounted filesystem with journal data mode.
[  178.213214] kjournald starting.  Commit interval 5 seconds
[  178.213540] EXT3 FS on sda6, internal journal
[  178.213559] EXT3-fs: mounted filesystem with journal data mode.
[  178.243890] kjournald starting.  Commit interval 5 seconds
[  178.244146] EXT3 FS on sda5, internal journal
[  178.244163] EXT3-fs: mounted filesystem with journal data mode.
[  178.267749] kjournald starting.  Commit interval 5 seconds
[  178.268057] EXT3 FS on sda8, internal journal
[  178.268074] EXT3-fs: mounted filesystem with journal data mode.
[  178.313673] kjournald starting.  Commit interval 5 seconds
[  178.314122] EXT3 FS on sda2, internal journal
[  178.314143] EXT3-fs: mounted filesystem with journal data mode.
[  178.330907] kjournald starting.  Commit interval 5 seconds
[  178.331235] EXT3 FS on sda3, internal journal
[  178.331253] EXT3-fs: mounted filesystem with journal data mode.
[  178.377875] kjournald starting.  Commit interval 5 seconds
[  178.378132] EXT3 FS on sda10, internal journal
[  178.378149] EXT3-fs: mounted filesystem with journal data mode.
[  179.936919] ip_tables: (C) 2000-2006 Netfilter Core Team
[  180.000721] nf_conntrack version 0.5.0 (16250 buckets, 65000 max)
[  180.001024] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[  180.001032] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[  180.001037] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[  180.227738] r8169: eth0: link up
[  180.227761] r8169: eth0: link up
[  183.019015] RPC: Registered udp transport module.
[  183.019023] RPC: Registered tcp transport module.
[  183.132843] Slow work thread pool: Starting up
[  183.132978] Slow work thread pool: Ready
[  183.133097] FS-Cache: Loaded
[  183.227222] FS-Cache: Netfs 'nfs' registered for caching
[  183.334386] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  184.835015] fuse init (API version 7.11)
[  190.616102] eth0: no IPv6 routers present
[  191.500069] Clocksource tsc unstable (delta = -158357386 ns)
[  196.240796] device eth0 entered promiscuous mode
[  201.880088] lp: driver loaded but no devices found
[  201.975662] ppdev: user-space parallel port driver

Attachment: Xorg.0.log.old
Description: application/trash


Reply to: