Bug#528311: xserver-xorg-video-savage: "[drm] Could not set DRM device bus ID." when applications tries to use drm
Package: xserver-xorg-video-savage
Version: 1:2.2.1-2.lenny1
Severity: important
According to glxinfo GLX is rendered indirectly, and this appears in the
Xorg log:
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2009-05-09 00:21 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1718516 2009-03-15 16:30 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
/etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1077 2009-05-09 00:21 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 54234 2009-05-12 01:29 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny1)
Current Operating System: Linux garfield.tagmedia.dk 2.6.26-2-openvz-686 #1 SMP Thu Mar 26 03:55:11 UTC 2009 i686
Build Date: 15 March 2009 03:18:10PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 12 01:23:31 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 2
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3148 card 1106,3148 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1462,787c rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) S3 Inc. VT8375 [ProSavage8 KM266/KL266] rev 0, Mem @ 0xe9000000/19, 0xe0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xea000000 from 0xeaffffff to 0xe9ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[2] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[3] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[5] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[1] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[2] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[3] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[5] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched savage from file name savage.ids in autoconfig
(==) Matched savage for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) SAVAGE: driver (version 2.2.1) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ProSavageDDR found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[5] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[6] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[7] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[14] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) SAVAGE(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 16/16
(==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): 2560x1005 TFT LCD panel detected but not active
(--) SAVAGE(0): Found 5 modes at this depth:
[111] 640 x 480, 60Hz, 75Hz, 85Hz, 100Hz, 160Hz
[114] 800 x 600, 60Hz, 75Hz, 85Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz
[122] 1600 x 1200, 60Hz
(II) SAVAGE(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) SAVAGE(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) SAVAGE(0): Unable to estimate virtual size
(II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x400 85Hz.
(II) SAVAGE(0): Not using default mode "640x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x200 85Hz.
(II) SAVAGE(0): Not using default mode "320x200" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 320x240 60Hz.
(II) SAVAGE(0): Not using default mode "320x240" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 320x240 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 320x240 75Hz.
(II) SAVAGE(0): Not using default mode "320x240" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 320x240 85Hz.
(II) SAVAGE(0): Not using default mode "320x240" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 400x300 56Hz.
(II) SAVAGE(0): Not using default mode "400x300" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): No suitable BIOS mode found for 400x300 60Hz.
(II) SAVAGE(0): Not using default mode "400x300" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 400x300 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 400x300 75Hz.
(II) SAVAGE(0): Not using default mode "400x300" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 400x300 85Hz.
(II) SAVAGE(0): Not using default mode "400x300" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 512x384 87Hz.
(II) SAVAGE(0): Not using default mode "512x384" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 512x384 60Hz.
(II) SAVAGE(0): Not using default mode "512x384" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 512x384 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 512x384 75Hz.
(II) SAVAGE(0): Not using default mode "512x384" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 512x384 84Hz.
(II) SAVAGE(0): Not using default mode "512x384" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 75Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x960 60Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x960 85Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 11a at 75Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 11a at 85Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): Chose mode 122 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 122 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 122 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 122 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 122 at 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1792x1344 60Hz.
(II) SAVAGE(0): Not using default mode "1792x1344" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1856x1392 60Hz.
(II) SAVAGE(0): Not using default mode "1856x1392" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1440 60Hz.
(II) SAVAGE(0): Not using default mode "1920x1440" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x768 60Hz.
(II) SAVAGE(0): Not using default mode "1280x768" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x384 60Hz.
(II) SAVAGE(0): Not using default mode "640x384" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x800 59Hz.
(II) SAVAGE(0): Not using default mode "1280x800" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x400 59Hz.
(II) SAVAGE(0): Not using default mode "640x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x768 54Hz.
(II) SAVAGE(0): Not using default mode "1152x768" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x384 54Hz.
(II) SAVAGE(0): Not using default mode "576x384" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 85Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 59Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 70Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 74Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 85Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1440x900 60Hz.
(II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 720x450 60Hz.
(II) SAVAGE(0): Not using default mode "720x450" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1024 59Hz.
(II) SAVAGE(0): Not using default mode "1600x1024" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 60Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 60Hz.
(II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x600 60Hz.
(II) SAVAGE(0): Not using default mode "960x600" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 72Hz.
(II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x600 72Hz.
(II) SAVAGE(0): Not using default mode "960x600" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Virtual size is 800x600 (pitch 800)
(**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MS[B]
[1] 0 0 0xe9000000 - 0xe907ffff (0x80000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xeb001000 - 0xeb0010ff (0x100) MX[B]
[7] -1 0 0xea000000 - 0xe9ffffff (0x0) MX[B]O
[8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[9] -1 0 0xe9000000 - 0xe907ffff (0x80000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0xe0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3148; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xea000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xea100000
(II) SAVAGE(0): [drm] aperture handle = 0xe2000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x1c265000
(II) SAVAGE(0): [drm] Status page mapped at 0xa785f000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): virtualX:800,virtualY:600
(II) SAVAGE(0): bpp:16,tiledwidthBytes:1664,tiledBufferSize:1011712
(II) SAVAGE(0): bpp:16,widthBytes:1664,BufferSize:999424
(II) SAVAGE(0): videoRambytes:0x00800000
(II) SAVAGE(0): textureSize:0x002fd000
(II) SAVAGE(0): textureSize:0x002fd000
(II) SAVAGE(0): textureOffset:0x004e2000
(II) SAVAGE(0): depthOffset:0x003eb000,depthPitch:1664
(II) SAVAGE(0): backOffset:0x002f4000,backPitch:1664
(II) SAVAGE(0): Reserved back buffer at offset 0x2f4000
(II) SAVAGE(0): Reserved depth buffer at offset 0x3eb000
(II) SAVAGE(0): Reserved 3060 kb for textures at offset 0x4e2000
(II) SAVAGE(0): Using 1259 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Setting up tile and stipple cache:
30 128x128 slots
6 256x256 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x000f4000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00000680
(II) SAVAGE(0): [junkers] backbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] backOffset:0x002f4000
(II) SAVAGE(0): [junkers] backPitch:0x00000680
(II) SAVAGE(0): [junkers] depthbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] depthOffset:0x003eb000
(II) SAVAGE(0): [junkers] depthPitch:0x00000680
(II) SAVAGE(0): [junkers] textureOffset:0x004e2000
(II) SAVAGE(0): [junkers] textureSize:0x002fd000
(II) SAVAGE(0): [junkers] textureSize:0x002fd000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000001
(II) SAVAGE(0): [junkers] agp:offset:0x01000000
(II) SAVAGE(0): [junkers] agp:size:0x01000000
(II) SAVAGE(0): [junkers] agp:map:0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xe9000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers:map:0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x1c265000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status:map:0xa785f000
(II) SAVAGE(0): [junkers] agpTextures:handle:0xea100000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers] apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0xea000000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000006
(II) SAVAGE(0): [junkers] width:0x00000320
(II) SAVAGE(0): [junkers] height:0x00000258
(II) SAVAGE(0): [junkers] mem:0x00800000
(II) SAVAGE(0): [junkers] cpp:2
(II) SAVAGE(0): [junkers] zpp:2
(II) SAVAGE(0): [junkers] agpMode:1
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x000f4000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] backOffset:0x002f4000
(II) SAVAGE(0): [junkers] depthbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] depthOffset:0x003eb000
(II) SAVAGE(0): [junkers] textureOffset:0x004e2000
(II) SAVAGE(0): [junkers] textureSize:0x002c0000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000012
(II) SAVAGE(0): [junkers] agpTextureHandle:0xea100000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers] apertureHandle:0xe2000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00001000
(II) SAVAGE(0): [junkers] statusHandle:0x1c265000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x22
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Generic Keyboard: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
(II) SAVAGE(0): [drm] removed 1 reserved context for kernel
(II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xe056f000 at 0xa7860000
(II) SAVAGE(0): [drm] Closed DRM master.
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 7104 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(==) SAVAGE(0): Write-combining range (0xe0000000,0x8000000)
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.0
(EE) [drm] Could not set DRM device bus ID.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Using 1448 lines for offscreen memory.
(II) SAVAGE(0): DPMS enabled
(WW) SAVAGE(0): Direct rendering disabled
(==) RandR enabled
(II) AIGLX: Screen 0 is not DRI capable
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) evaluating device (Configured Mouse)
(II) evaluating device (Generic Keyboard)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
[config/hal] couldn't initialise context: (null) ((null))
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-openvz-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-savage depends on:
ii libc6 2.7-18 GNU C Library: Shared libraries
ii xserver-xorg-core 2:1.4.2-10.lenny1 Xorg X server - core server
xserver-xorg-video-savage recommends no packages.
xserver-xorg-video-savage suggests no packages.
-- no debconf information
Reply to: