[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#481529: xserver-xorg: Unusable after last upgrade (maybe wrong refresh rates?)



Hi Brice,

as I still had the same problem, I put the line:
	Option "DRI" "off" 
in the Device section of the xorg.conf file.
This might not be the optimal solution, but at least I can now use X. xrandr gives me the following output:
---------------------------------------------------------------------------------------
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1200
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 310mm
   1280x1024      60.0*+   75.0     59.9  
   1280x960       59.9  
   1152x864       75.0     74.8  
   1024x768       75.1     70.1     60.0  
   1024x768_60.00   60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     66.7     60.0  
   720x400        70.1  
   640x400        69.2  
S-video disconnected (normal left inverted right x axis y axis)
---------------------------------------------------------------------------------------
Do you have an idea of the cause of this problem ? If you need more informations, don't hesitate,


Dimitri




On Fri, 16 May 2008 20:49:50 +0200
Brice Goglin <Brice.Goglin@ens-lyon.org> wrote:

> reassign 481529 xserver-xorg-video-ati
> found 481529 1:6.8.0-1
> thank you
> 
> 
> Dimitri Chausson wrote:
> > The configuration file (xorg.conf) was not changed until I got this problem. The
> > output on the screen is unreadable (looks like biaised stripes, even though I
> > can recognize the background image).
> 
> What kind of monitors do you have? One on the DVI output right? Which
> resolution and refresh rate did you get before the upgrade?
> 
> Do you have a way to open a terminal and run xrandr commands to see the
> available mode and switch to another one?
> 
> Can you try adding:
>     Option "Monitor-DVI-0" "Configured Monitor"
> to the Device section and:
>     Modeline "1024x768_60.00"  64.11  1024 1080 1184 1344  768 769 772
> 795  -HSync +Vsync
>     Option "PreferredMode" "1024x768_60.00"
> to the Monitor section?
> 
> It is supposed to force 1024x768 at 60Hz (Modeline comes from gtf 1024
> 768 60).
> 
> Brice



Reply to: