[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#112008: marked as done (xserver-xfree86: [mga] corrupted screen at 1280x1024 on MGA G200 AGP rev 3)



Your message dated Thu, 07 Jun 2007 20:49:52 +0200
with message-id <46685350.5020900@ens-lyon.org>
and subject line ping timeout, closing
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: xserver-xfree86
Version: 4.1.0-5
Severity: important
Tags: woody

Problems occur running XFree86 4.1.0 on an HP Vectra PC which has an MGA
chipset as an integrated graphics card.

In XFree86 any attempt to run at above 1280x1024 resolution caused the
video output to appear twice on the screen (as would be caused, perhaps,
if the timing from Hsync to the start of the image data was alternately
long and short) and there are also some black, horizontal lines on the
screen.

Running at 1280x1024 resolution stopped this problem, but even at
1280x1024 the black horizontal line sometimes appear when scrolling
windows.

The situation with XFree 4.0 was much the same as with version 3, but
starting with Xfree 4.1 the resolution at which the problem appears
has dropped so that even 1280x1024 now shows the problem and 1152x864
is OK.

I suspect the screen resoultion is less the issue rather the clock rate
required to support it.  I attach a log file of the server starting
at the 1280x1024 resolution.

The problem occurs on the HP Vectra which appears to have the MGA200
chip and not on the MGA400 I have at home (in a non-HP machine)

-- System Information
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux tuborg 2.4.9 #2 Mon Sep 3 11:08:09 BST 2001 i686
Locale: LANG=C, LC_CTYPE=C

Versions of packages xserver-xfree86 depends on:
ii  debconf                       0.9.95     Debian configuration management sy
ii  libc6                         2.2.4-1    GNU C Library: Shared libraries an
ii  xserver-common                4.1.0-5    files and utilities common to all 
ii  zlib1g                        1:1.1.3-15 compression library - runtime


This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: xx August 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Sep 11 16:43:53 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Taxan 2100LR"
(**) |   |-->Device "HP Integrated"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "gb"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) Matrox MGA G200 AGP rev 3, Mem @ 0xe6000000/24, 0xe4000000/14, 0xe5000000/23
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
	mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(--) Assigning device section with no busID to primary device
(--) Chipset mgag200 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(WW) Warning, couldn't open module mga_hal
(EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mgag200"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE6000000
(--) MGA(0): MMIO registers at 0xE4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE5000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07540
(--) MGA(0): Found and verified enhanced Video BIOS info block
(**) MGA(0): VideoRAM: 8192 kByte
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.2.0
(==) MGA(0): Write-combining range (0xe6000000,0x800000)
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info

(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 250 MHz
(II) MGA(0): Taxan 2100LR: Using hsync range of 32.00-90.00 kHz
(II) MGA(0): Taxan 2100LR: Using vrefresh range of 70.00-120.00 Hz
(II) MGA(0): Clock range:  12.00 to 250.00 MHz
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x960" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1400x1050" (vrefresh out of range)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(==) MGA(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(==) MGA(0): Write-combining range (0xe6000000,0x800000)
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI
(EE) MGA(0): Need at least 15360 kB video memory at this resolution, bit depth
(II) MGA(0): Using 614 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid filled trapezoids
	8x8 mono pattern filled rectangles
	8x8 mono pattern filled trapezoids
	Indirect CPU to Screen color expansion
	Screen to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		20 128x128 slots
		5 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(--) MGA(0): Direct rendering disabled
PEXExtensionInit: Couldn't open default PEX font file  Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "PS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Generic Mouse: always reports core events
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
	No such file or directory.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!



--- End Message ---
--- Begin Message ---
Closing this bug since I didn't get any reply from the submitter (or
repliers) after my ping about a month ago. If anybody ever reproduces
this problem, feel free to reopen.

Brice


--- End Message ---

Reply to: