Bug#362853: I had the same problem
I had the same problem. I have a "AlpsPS/2 ALPS DualPoint TouchPad" ( cat
/proc/bus/input/devices )
According to: http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad , the
"InoutDevice" section should be very different for Synaptic users as opposed
to ALPS users.
I solved it by replacing, in /etc/X11/xorg.conf :
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
by:
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
# LeftEdge (Integer) - X coordinate for left edge.
Option "LeftEdge" "130"
# RightEdge (Integer) - X coordinate for right edge.
Option "RightEdge" "840"
# TopEdge (Integer) - Y coordinate for top edge.
Option "TopEdge" "130"
# BottomEdge (Integer) - Y coordinate for bottom edge.
Option "BottomEdge" "640"
# FingerLow (Integer) - When finger pressure drops below this value,
# the driver counts it as a release.
Option "FingerLow" "7"
# FingerHigh (Integer) - When finger pressure goes above this value,
# the driver counts it as a touch.
Option "FingerHigh" "8"
# MaxTapTime (Integer) - Maximum time (in milliseconds) for detecting
# a tap.
Option "MaxTapTime" "180"
# MaxTapMove (Integer) - Maximum movement of the finger for detecting
# a tap.
Option "MaxTapMove" "110"
# EmulateMidButtonTime (Integer) - Maximum time (in milliseconds) for
# middle button emulation.
Option "EmulateMidButtonTime" "75"
# VertScrollDelta (Integer) - Move distance of the finger for a
# scroll event.
Option "VertScrollDelta" "20"
# HorizScrollDelta (Integer) - Move distance of the finger for a
# scroll event.
Option "HorizScrollDelta" "20"
# MinSpeed (Float) - Minimum speed factor.
Option "MinSpeed" "0.60"
# MaxSpeed (Float) - Maximum speed factor.
Option "MaxSpeed" "1.10"
# AccelFactor (Float) - Acceleration factor.
Option "AccelFactor" "0.030"
# EdgeMotionMinSpeed (Integer) - Slowest setting for edge motion
# speed.
Option "EdgeMotionMinSpeed" "200"
# EdgeMotionMaxSpeed (Integer) - Fastest setting for edge motion
# speed.
Option "EdgeMotionMaxSpeed" "200"
# UpDownScrolling (Boolean) - If on, the up/down buttons generate
# button 4/5 events. If off, the up button generates a double click
# and the down button generates a button 2 event.
Option "UpDownScrolling" "1"
# CircularScrolling (Bool) - If on, circular scrolling is used.
Option "CircularScrolling" "1"
# CircScrollDelta (Float) - Move angle (radians) of finger to
# generate a scroll event.
Option "CircScrollDelta" "0.1"
# CircScrollTrigger (Integer) - Trigger region on the touchpad
# to start circular scrolling.
# 0 All Edges
# 1 Top Edge
# 2 Top Right Corner
# 3 Right Edge
# 4 Bottom Right Corner
# 5 Bottom Edge
# 6 Bottom Left Corner
# 7 Left Edge
# 8 Top Left Corner
Option "CircScrollTrigger" "2"
# SHMConfig (Boolean) - Switch on/off shared memory for
# configuration. (allows parameters to be changed with synclient
# program).
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
EndSection
The activation of SHMConfig makes it possible to use the synclient command:
synclient -l
Miry
______________________________________________
LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com
Reply to: