Bug#322550: xlibmesa-dri: Confirmed on i810
Package: xlibmesa-dri
Version: 6.8.2.dfsg.1-9
Followup-For: Bug #322550
Hello,
I can confirm this happens here with the i810 driver. Commenting out the
'Load "dri"' line fixes the problem. I attach the full log, but this bit
is probably of interest:
---
Fatal server error:
EnterVT failed for screen 0
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional
informati
on.
Error in I810WaitLpRing(), now is 71488, start is 69487
pgetbl_ctl: 0xef20001 pgetbl_err: 0x0
ipeir: 0 iphdr: 0
LP ring tail: 8 head: 0 len: 0 start 0
eir: 0 esr: 0 emr: 3d
instdone: ff7b instpm: 0
memmode: 4 instps: 0
hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0
space: 65520 wanted 65528
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd094e000 at
0x40001000
FatalError re-entered, aborting
lockup
---
There two reports may be related:
https://bugs.freedesktop.org/show_bug.cgi?id=1467
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=327507
HTH,
George B.
-- Package-specific info:
VGA-compatible devices on PCI bus:
0000:00:01.0 VGA compatible controller: Intel Corporation 82810 CGC [Chipset Graphics Controller] (rev 03)
<-snip> Skip log file as it is with DRI disabled, see attached file
GL-library linkage of glxinfo executable:
libGLU.so.1 => /usr/X11R6/lib/libGLU.so.1 (0x412ba000)
libGL.so.1 => /usr/X11R6/lib/libGL.so.1 (0x41254000)
glxinfo reports:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x25 16 tc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x26 16 tc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x27 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x29 16 dc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x2a 16 dc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27.20050707
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Versions of packages xlibmesa-dri depends on:
ii xlibmesa-gl 6.8.2.dfsg.1-9 Mesa 3D graphics library [X.Org]
xlibmesa-dri recommends no packages.
-- no debconf information
X Window System Version 6.8.2 (Debian 6.8.2.dfsg.1-9 20051014051248 David Nusinow <dnusinow@debian.org>)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.12-1-686 i686 [ELF]
Current Operating System: Linux dx-mon-001 2.4.27.20050707 #1 Fri Jul 8 08:58:55 BST 2005 i686
Build Date: 14 October 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.27.20050707 (root@dx-mon-001) (gcc version 3.3.6 (Debian 1:3.3.6-7)) #1 Fri Jul 8 08:58:55 BST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 15:13:08 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Samsung SyncMaster 913N"
(**) | |-->Device "Intel Corporation 82810 CGC [Chipset Graphics Controller]"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(**) Option "XkbOptions" "ctrl:nocaps"
(**) XKB: options: "ctrl:nocaps"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7120 card 1028,0108 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7121 card 1028,0108 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 1028,0108 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:0c:0: chip 10b7,9200 card 1028,00fe rev 78 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xff800000 - 0xff9fffff (0x200000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xf8000000/26, 0xffa00000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[1] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[4] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[6] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[7] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[8] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[1] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[4] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[6] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[7] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[8] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[6] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[11] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[14] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G
(II) Primary Device is: PCI 00:01:0
(--) Chipset i810 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[6] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[11] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[14] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[15] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[6] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[14] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[16] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[17] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 34.40
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: SAM Model: 11f Serial#: 1296707897
(II) I810(0): Year: 2005 Week: 7
(II) I810(0): EDID Version: 1.3
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate Composite
(II) I810(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) I810(0): Gamma: 2.20
(II) I810(0): DPMS capabilities: Off; RGB/Color Display
(II) I810(0): First detailed timing is preferred mode
(II) I810(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
(II) I810(0): blueX: 0.143 blueY: 0.102 whiteX: 0.310 whiteY: 0.330
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@56Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1280x1024@75Hz
(II) I810(0): 1152x870@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) I810(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) I810(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) I810(0): Monitor name: SyncMaster
(II) I810(0): Serial No: H9NY207905
(--) I810(0): Chipset: "i810"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xFFA00000
(II) I810(0): I810CheckAvailableMemory: 206844k available
(**) I810(0): Will alloc AGP framebuffer: 32768 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) I810(0): config file vrefresh range 50-75Hz not within DDC vrefresh ranges.
(II) I810(0): Samsung SyncMaster 913N: Using hsync range of 30.00-65.00 kHz
(II) I810(0): Samsung SyncMaster 913N: Using vrefresh range of 50.00-75.00 Hz
(II) I810(0): Clock range: 9.50 to 163.00 MHz
(II) I810(0): Not using default mode "640x350" (vrefresh out of range)
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (vrefresh out of range)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x400" (vrefresh out of range)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (vrefresh out of range)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(WW) (1680x1050,Samsung SyncMaster 913N) mode clock 147.14MHz exceeds DDC maximum 140MHz
(II) I810(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "1440x900" (width too large for virtual size)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) I810(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) I810(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) I810(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) I810(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) I810(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(**) I810(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) I810(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(--) I810(0): Display dimensions: (380, 300) mm
(--) I810(0): DPI set to (85, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No symbols found
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(**) I810(0): page flipping disabled
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xffa00000 - 0xffa7ffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xff8ffc00 - 0xff8ffc7f (0x80) MX[B]
[8] -1 0 0xffa00000 - 0xffa7ffff (0x80000) MX[B](B)
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[16] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x0000dcd0 - 0x0000dcdf (0x10) IX[B]
[19] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) I810(0): [drm] DRM interface version 1.0
(II) I810(0): [drm] created "i810" driver at busid "pci:0000:00:01.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xd094e000
(II) I810(0): [drm] mapped SAREA 0xd094e000 to 0x40001000
(II) I810(0): [drm] framebuffer handle = 0xf8000000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] Registers = 0xffa00000
(II) I810(0): [agp] dcacheHandle : 0x0
(II) I810(0): [agp] GART: no dcache memory found
(II) I810(0): [agp] Bound backbuffer memory
(II) I810(0): [agp] Bound depthbuffer memory
(II) I810(0): [agp] Bound System Texture Memory
(II) I810(0): [agp] GART: Allocated 4K for mouse cursor image
(II) I810(0): [agp] GART: ARGB cursor alloc failed
(II) I810(0): Adding 384 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): [dri] Buffer map : 16fb000
(II) I810(0): [drm] added 256 4096 byte DMA buffers
(II) I810(0): [drm] Init PRE v1.4 interface.
(II) I810(0): [drm] dma control initialized, using IRQ 16
(II) I810(0): [dri] visual configs initialized.
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 108.0 MHz [ 0x10 0x2 0x20 ] [ 18 4 2 ]
(II) I810(0): chose watermark 0x22210000: (tab.freq 108.0)
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
16 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(II) I810(0): X context handle = 0x00000007
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(==) I810(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Generic Keyboard: XkbLayout: "gb"
(**) Option "XkbOptions" "ctrl:nocaps"
(**) Generic Keyboard: XkbOptions: "ctrl:nocaps"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/psaux"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Device: "/dev/input/mice"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) UnloadModule: "mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
Fatal server error:
EnterVT failed for screen 0
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Error in I810WaitLpRing(), now is 71488, start is 69487
pgetbl_ctl: 0xef20001 pgetbl_err: 0x0
ipeir: 0 iphdr: 0
LP ring tail: 8 head: 0 len: 0 start 0
eir: 0 esr: 0 emr: 3d
instdone: ff7b instpm: 0
memmode: 4 instps: 0
hwstam: 9ac7 ier: 0 imr: 9ac7 iir: 0
space: 65520 wanted 65528
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd094e000 at 0x40001000
FatalError re-entered, aborting
lockup
Reply to: