Bug#236197: xserver-xfree86: [ati/radeon] Dual Head not working after upgrade from 4.3.0-2 to 4.3.0-3.
On Sun, 2004-03-07 at 12:57, Dominique Dumont wrote:
> Hello Miguel
>
> Miguel Marques <miguel@yorku.ca> writes:
> > When I upgraded again to 4.3.0-3 to get the extra information
> > requested by Christian, dual head worked just fine.
>
>
> I have some trouble to set up dual head on my radeon 9200 card. Could
> you send me your XF86Config-4 file so I can use it for reference ?
>
Hi,
attached is a XF86Config-4, which does Dualhead just fine here.
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY
[Radeon 7000/VE]
cheers.
Christian
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "USBMouse"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "record"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "USBMouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "AlwaysCore"
Option "ZaxisMapping" "4 5"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
Screen 0
# CloneDisplay "2"
EndSection
Section "Device"
Identifier "Card1"
Driver "ati"
BusId "PCI:1:0:0"
Screen 1
# CloneDisplay "2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "IMPS/2"
Option "ZaxisMapping" "4 5"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Eizo"
ModelName "FlexScan"
HorizSync 30-96
VertRefresh 50-160
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Eizo"
ModelName "FlexScan"
HorizSync 30-96
VertRefresh 50-160
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Reply to: