[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: smartctl cannot access my storage, need syntax help



On 1/15/24 14:56, gene heskett wrote:
root@coyote:~# for j in /dev/disk/by-id/* ; do printf '%s\t%s\n' "$(realpath "$j")" "$j" ; done
/dev/sr0        /dev/disk/by-id/ata-ATAPI_iHAS424_B_3524253_327133504865
/dev/sdi        /dev/disk/by-id/ata-Gigastone_SSD_GST02TBG221146
/dev/sdj1       /dev/disk/by-id/ata-Gigastone_SSD_GST02TBG221146-part1
/dev/sdh        /dev/disk/by-id/ata-Gigastone_SSD_GSTD02TB230102
/dev/sdh1       /dev/disk/by-id/ata-Gigastone_SSD_GSTD02TB230102-part1
/dev/sdk        /dev/disk/by-id/ata-Gigastone_SSD_GSTG02TB230206
/dev/sdk1       /dev/disk/by-id/ata-Gigastone_SSD_GSTG02TB230206-part1
/dev/sdf        /dev/disk/by-id/ata-Samsung_SSD_870_EVO_1TB_S626NF0R302498T

... 2 pairs with identical "serial numbers", ...


Are you certain that it is not two drives that fail to connect at boot? You previously posted smartctl reports indicating a bad SATA connection.


If you disconnect everything except one Gigastone SSD, connect it to a known good motherboard SATA port using a known good SATA cable, connect it to a known good PSU power cable, boot live media into a rescue shell, examine the Gigastone, write down the serial number, shutdown, and repeat for the four other Gigastone drives, can you confirm the duplicate serial numbers?


David


Reply to: