[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: loss of mbmon function



On 11/2/22 07:26, Alexander V. Makartsev wrote:
On 02.11.2022 05:55, gene heskett wrote:
On 11/1/22 16:52, Alexander V. Makartsev wrote:
First step is to find model and make of IC that provides sensor functions.
Does this command gives any clues?
$ sudo sensors-detect

answered yes to all the default NO questions and still got only:
# Chip drivers
coretemp
nct6775

Which are now loaded, but still no voltages or fans are reported.

These two has to be sufficient. Just make sure these modules are loaded:
$ lsmod | grep -iE 'coretemp|nct6775'

Now "sensors" utility should be able to output values from every available sources of super I/O IC.
    $ sensors

They were not autoloaded, which I'd call a bug, but manually modprobed and now present
in an lsmod output, sensors still aren't working except in the bios.

gkrellm and sensors both say essentially the same thing:
ene@coyote:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +32.0°C  (high = +84.0°C, crit = +100.0°C)
Core 0:        +30.0°C  (high = +84.0°C, crit = +100.0°C)
Core 1:        +30.0°C  (high = +84.0°C, crit = +100.0°C)
Core 2:        +32.0°C  (high = +84.0°C, crit = +100.0°C)
Core 3:        +30.0°C  (high = +84.0°C, crit = +100.0°C)
Core 4:        +32.0°C  (high = +84.0°C, crit = +100.0°C)
Core 5:        +30.0°C  (high = +84.0°C, crit = +100.0°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)


And the first disk in the raid fails the read test, 2nd one being tested ( -t long) now, in fact s/b done.
And it looks exactly like the first drive
====================
gene@coyote:~$ sudo smartctl /dev/sdf -a
[sudo] password for gene:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-19-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 870 EVO 1TB
Serial Number:    S626NF0R302502E
LU WWN Device Id: 5 002538 f413394a9
Firmware Version: SVT01B6Q
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Nov  2 08:03:40 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 117)    The previous self-test completed having
                    the read element of the test failed.
Total time to complete Offline
data collection:         (    0) seconds.
Offline data collection
capabilities:              (0x53) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  85) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE UPDATED  WHEN_FAILED RAW_VALUE   5 Reallocated_Sector_Ct   0x0033   099   099   010    Pre-fail Always       -       1   9 Power_On_Hours          0x0032   097   097   000    Old_age Always       -       10581  12 Power_Cycle_Count       0x0032   099   099   000    Old_age Always       -       58 177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail Always       -       21 179 Used_Rsvd_Blk_Cnt_Tot   0x0013   099   099   010    Pre-fail Always       -       1 181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age Always       -       0 182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age Always       -       0 183 Runtime_Bad_Block       0x0013   099   099   010    Pre-fail Always       -       1 187 Reported_Uncorrect      0x0032   100   100   000    Old_age Always       -       0 190 Airflow_Temperature_Cel 0x0032   069   049   000    Old_age Always       -       31 195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age Always       -       0 199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age Always       -       0 235 Unknown_Attribute       0x0012   099   099   000    Old_age Always       -       36 241 Total_LBAs_Written      0x0032   099   099   000    Old_age Always       -       36284196270

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining LifeTime(hours)  LBA_of_first_error # 1  Extended offline    Completed: read failure       50% 10580         1920805984

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
  256        0    65535  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Why did it not even start the read test? On to the next two drives. So far the only diff is the LBA of first error. ???

Thank you, Take care and stay well, Alexander V. Makartsev.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>


Reply to: