Re: SSD Optimization - Crucial CT1000MX500SSD1

[Dan Ritter <dsr@randomstring.org>]

Marcelo Laia wrote: 
> Recently, I bought a SSD SATA Crucial CT1000MX500SSD1.
> 
> Nowadays, one week a go, debian testing system got crashed because partition
> got read only.
> 
> I suspect this is a reason from some upgrade and I suspect that an SSD
> optimization can solve this problem.
> 
> SSD firmware is up to date. This version is M3CR043.
> 
> Here is some informations:
> :~$ sudo smartctl -a /dev/sda
> https://pastebin.com/Jyrhn1A2
> 
> :~$ sudo journalctl --since "2022-09-25 00:00:00" | grep sda
> https://pastebin.com/QtCqpJPm
> 
> :~$ sudo journalctl --since "2022-09-25 00:00:00" | grep ata1
> https://pastebin.com/x5QdaYQU
> 
> :~$ sudo journalctl --since "2022-09-25 00:00:00" | grep error
> https://pastebin.com/1hEPm7YX
> 
> Have you some clue and/or advise here?

You are having hardware errors. This will not be solved by
software.

The error may be in the controller (unlikely unless it is very
hot), the data cable (possible, cheap to switch) or the disk
(likely, will need replacement).

-dsr-