Re: How exactly do I create a Debian live USB?

[Махно <mindaugasceliesius@gmail.com>]

Hello. Your PC doesn't have a floppy drive, but you have /dev/fd0, and many things will try to use it. You can disable this message (blk_update_request: I/O error, dev fd0, sector 0 op).

As root

# rmmod floppy
# echo "blacklist floppy" | tee /etc/modprobe.d/blacklist-floppy.conf 
# dpkg-reconfigure initramfs-tools 

2021-10-12, an, 03:30 Sean Behan <seanwbehan@riseup.net> rašė:

That cp command looks fine, but if you want to try using dd with
offsets, try:

sudo dd if=debian-live-11.0.0-amd64-standard.iso of=/dev/sdb bs=4M

if is input file, of is output file, bs is blocksize which I set to 4MB
which is a typical block size

If that still doesn't work it's likely an issue with the USB flash drive
you're using.

---
Sean Behan

On 2021-10-11 06:38, kaye n wrote:
> Hello Friends!
>
> I did this and was able to boot my newly created Debian 11 live USB but was
> stuck in a black terminal-like screen where it says, I/O error, etc.
>
> Using GParted, I created an MS-DOS partition table and formatted the USB
> stick in fat32.
>
> Then I used these commands
>
> sudo cp  debian-live-11.0.0-amd64-standard.iso /dev/sdb
> sync
>
> All seemed fine until I booted the live USB and got the error message as
> stated above.
>
> Thank you for your time.