Re: Get an error when i use new kernel

[stan clay <neversettlely@gmail.com>]

 I'm sorry, I haven't finished. I sent it by mistake，

 the error log is：

[  26.367633] nvme 0000:01:00.0: AER: PCIe Bus Error:
severity=Corrected, type=Data Link Layer, (Transmitter ID)
[  26.367633] nvme 0000:01:00.0: AER:   device [1e0f:0009] error
status/mask=00001000/00006000
[  26.367633] nvme 0000:01: AER:  [12]    Timeout

i use lspci to search this device(1e0f:0009),and i got the error device is 

➜  ~ lspci -nn |grep 0009
01:00.0 Non-Volatile memory controller [0108]: KIOXIA Corporation Device [1e0f:0009] (rev 01)

the device is my ssd

I searched the Internet for this error and found some similar errors and solutions, such as in the grub.cfg Riga PCI = ***, etc., but it doesn't work here. I found that their error reporting devices are different from mine

stan clay <neversettlely@gmail.com> 于2020年8月26日周三 上午10:26写道：

Yesterday, I upgraded unstable from stable and installed a new kernel, but I couldn't get into the system with the new kernel. I got an error

[  26.367633] nvme 0000:01:00.0: AER: PCIe Bus Error:
severity=Corrected, type=Data Link Layer, (Transmitter ID)
[  26.367633] nvme 0000:01:00.0: AER:   device [1e0f:0009] error
status/mask=00001000/00006000