Re: Dual boot: one legacy, the other uefi
Le 06/10/2019 à 22:45, Beco a écrit :
Now the system can boot both systems ok. But to choose which one you want,
you need to enter the BIOS, change legacy to UEFI, and vice-versa, then you
can boot.
Would you mind telling which systems boots in EFI mode and which one
boots in legacy mode ?
Not a good way to keep.
Some people think otherwise. It is not the most convenient, but it
prevents Windows to interfere with GRUB's operation.
Lets give the devices some names.
/dev/sda4 is windows 10
/dev/sda5 is debian buster 10
/dev/sda6 is swap
Grub is installed at sda5 with Debian, but when updated it doesn't
recognize A Windows partition.
Of course not. Both systems must be set up to boot in the same mode.
Can you point me to a possible howto, blog, set of instructions or even
abstract ideas that are in the right direction?
If Windows boots in EFI mode :
Mount the EFI partition on /boot/efi.
Install grub-efi-amd64.
Boot some Linux media in EFI mode.
Chroot into the Debian system, mount the usual pseudo-filesystems
(/proc, /dev...) and the EFI partition.
Run grub-install.
Run update-grub.
Done.
If Windows boots in legacy mode :
Create a partition with "BIOS boot" type. 100 ko is more than enough.
Install grub-pc.
Done.
Reply to: