[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Raid 0

На 2018-11-06 15:49, Finariu Florin написа:
Somebody can help me with some information about why I can not see the
Raid0 created in bios?
I have a motherboard EPC602D8A with 2 chipsets: Intel C602 (Sata 2 x
4, Sata 3 x 2) and Marvell SE9172 (Sata 3 x 2). I create in BIOS a
Raid0 on Marvel and another Raid0 on Intel C602.
When I start installation of OS in the section 'detect disk' it's show
me nothing ask me to verify if the SSDs are connected. When I install
OS with no Raid partition it see all SSDs I have plugged. I verified
all SSDs one by one all cables too but nothing...
So how can I see the Raids created in Bios? Is something else should I
do to be able to see them? I tried on RedHat, Fedora, CentOS, Kubuntu
but the same thing!
So if you have informations about this please help me !
Thank you!


Your raid controller is not probably supported. A possible workarraound could be you to use LVM.

Kind regards

Reply to: