Re: Set the MTU on the interface
Алексей wrote:
> --=-+rZWYbegwcP6FxaxjrFp
> Content-Type: text/plain; charset="UTF-8"
> Content-Transfer-Encoding: binary
> Content-Length: 836
>
> Hi!
>
> I need an advice about how can I set the MTU on the interface which is
> not in fact configured. So to explain in more detail:
>
> I have a debian box acting as a router and it has interface let's say
> eth0. Eth0 itself doesn't have any IP configuration, all IP
> configuration and routing is done on vlan interfaces bound to eth0. I
> need to route jumbo frames so I need to set the MTU on vlan interfaces
> to 9000 and consequently I need to set MTU to 9000 on the physical
> eth0 also. However, as i have only one line for eth0 in
> /etc/network/interfaces:
>
> auto eth0
So then define at least that component of eth0. No need for an IP
address / gateway / etc.
--
|_|O|_| Registered Linux user #585947
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: 05CA 9A50 3F2E 1335 4DC5 4AEE 8E11 DDF3 1279 A281
Reply to: