Wmtemp output wrong with kernel 4.8.0-1-amd64
Hi all.
Running Sid which recently went to kernel 4.8.0-1-amd64. But Wmtemp
outout is wrong: both CPU and motherboard temps are 41.
Wmtemp is a WindowMaker dock applet that displays CPU and motherboard
temps as they are gathered by Lm-sensors.
Lm-sensors has some programs, one of them the 'sensors' command which
will show all the data that is currently gathered.
The following is the output of sensors with kernel 4.7.0-1-amd64:
<----------------------------------------------------------------------------------------------->
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.28 V (min = +0.80 V, max = +1.80 V)
3.3V Voltage: +3.26 V (min = +2.97 V, max = +3.63 V)
5V Voltage: +5.03 V (min = +4.50 V, max = +5.50 V)
12V Voltage: +11.90 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2860 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS2 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +34.0°C (high = +60.0°C, crit = +75.0°C)
MB Temperature: +27.0°C (high = +45.0°C, crit = +75.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +25.1°C (high = +70.0°C)
(crit = +90.0°C, hyst = +88.0°C)
nouveau-pci-0400
Adapter: PCI adapter
temp1: +41.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +2.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
nouveau-pci-0500
Adapter: PCI adapter
temp1: +40.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +2.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
<----------------------------------------------------------------------------------------------->
The following is the output of sensors with kernel 4.8.0-1-amd64:
<----------------------------------------------------------------------------------------------->
nouveau-pci-0400
Adapter: PCI adapter
temp1: +41.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +2.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.04 V (min = +0.80 V, max = +1.80 V)
3.3V Voltage: +3.28 V (min = +2.97 V, max = +3.63 V)
5V Voltage: +5.00 V (min = +4.50 V, max = +5.50 V)
12V Voltage: +11.90 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2922 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS1 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS2 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +29.0°C (high = +60.0°C, crit = +75.0°C)
MB Temperature: +28.0°C (high = +45.0°C, crit = +75.0°C)
nouveau-pci-0500
Adapter: PCI adapter
temp1: +40.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +2.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +18.5°C (high = +70.0°C)
(crit = +90.0°C, hyst = +88.0°C)
<----------------------------------------------------------------------------------------------->
As can be seen, data is the same but the order is different. It appears
that the output of nouveau-pci-0400 is used, while that of
atk0110-acpi-0 should be.
Can anyone shed light on this?
Hugo
Reply to: