|
Hi, Debian, We have a system with debian8.3, the poweroff is not working and everytime it will be perform a restart instead. However when we use debian8.4, it works normally. Below is the log, do you have any advice? Stopping Permit User Sessions... Stopping Login Service... [[32m OK [0m] Stopped Permit User Sessions. [[32m OK [0m] Stopped Login Service. [[32m OK [0m] Stopped target Basic System. [[32m OK [0m] Stopped target Slices. [[32m OK [0m] Removed slice User and Session Slice. [[32m OK [0m] Stopped target Paths. [[32m OK [0m] Stopped target Timers. [[32m OK [0m] Stopped target Sockets. [[32m OK [0m] Closed bonescript.socket. [[32m OK [0m] Closed cloud9.socket. [[32m OK [0m] Closed Avahi mDNS/DNS-SD Stack Activation Socket. [[32m OK [0m] Closed D-Bus System Message Bus Socket. [[32m OK [0m] Closed Syslog Socket. [[32m OK [0m] Stopped target System Initialization. Stopping Network Time Synchronization... [[32m OK [0m] Stopped target Encrypted Volumes. Stopping Update UTMP about System Boot/Shutdown... Stopping Apply Kernel Variables... [[32m OK [0m] Stopped Apply Kernel Variables. Stopping Load Kernel Modules... [[32m OK [0m] Stopped Load Kernel Modules. Stopping LSB: Raise network interfaces.... [[32m OK [0m] Stopped target Swap. [[32m OK [0m] Stopped target Remote File Systems. [[32m OK [0m] Stopped target Remote File Systems (Pre). [[32m OK [0m] Stopped Network Time Synchronization. [[32m OK [0m] Stopped Update UTMP about System Boot/Shutdown. [[32m OK [0m] Stopped LSB: Raise network interfaces.. Stopping Load/Save Random Seed... Stopping Create Volatile Files and Directories... [[32m OK [0m] Stopped Create Volatile Files and Directories. [[32m OK [0m] Stopped target Local File Systems. [ Unmounting /run/user/1000... Unmounting /sys/kernel/debug... [[32m OK [0m] Stopped Load/Save Random Seed. [[32m OK [0m] Unmounted /run/user/1000. [[32m OK [0m] Unmounted /sys/kernel/debug. [[32m OK [0m] Reached target Unmount All Filesystems. [[32m OK [0m] Stopped target Local File Systems (Pre). Stopping Create Static Device Nodes in /dev... [[32m OK [0m] Stopped Create Static Device Nodes in /dev. Stopping Remount Root and Kernel File Systems... [[32m OK [0m] Stopped Remount Root and Kernel File Systems. [[32m OK [0m] Reached target Shutdown. [[32m OK [0m] Reached target Final Step. Starting Power-Off... [ 150.866978] musb-dsps 47401c00.usb: otg: usb_otg_unregister_hcd: device not registered to otg core [ 151.007745] reboot: Power down U-Boot SPL 2016.01-00001-g4eb802e (Jan 13 2016 - 11:14:31) Trying to boot from MMC bad magic U-Boot 2016.01-00001-g4eb802e (Jan 13 2016 - 11:14:31 -0600), Build: jenkins-github_Bootloader-Builder-313 Watchdog enabled I2C: ready DRAM: 512 MiB Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Net: not set. Validating first E-fuse MAC cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds Card did not respond to voltage select! gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! Card did not respond to voltage select! switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 1684 bytes read in 24 ms (68.4 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.1.15-ti-rt-r43 ... 7800752 bytes read in 456 ms (16.3 MiB/s) loading /boot/dtbs/4.1.15-ti-rt-r43/am335x-boneblack.dtb ... 60524 bytes read in 53 ms (1.1 MiB/s) loading /boot/initrd.img-4.1.15-ti-rt-r43 ... 4096241 bytes read in 295 ms (13.2 MiB/s) debug: [console=ttyO0,115200n8 root=UUID=9e40711b-4280-4fcf-8f38-cccd31acadea ro rootfstype=ext4 rootwait coherent_pool=1M quiet cape_universal=enable] ... debug: [bootz 0x82000000 0x88080000:3e80f1 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x7707b0 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fc17000, end 8ffff0f1 ... OK Loading Device Tree to 8fc05000, end 8fc16c6b ... OK Starting kernel ... [ 3.486371] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 3.797722] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.943360] bone_capemgr bone_capemgr: slot #0: No cape found [ 4.003336] bone_capemgr bone_capemgr: slot #1: No cape found [ 4.063335] bone_capemgr bone_capemgr: slot #2: No cape found [ 4.123332] bone_capemgr bone_capemgr: slot #3: No cape found Loading, please wait... fsck from util-linux 2.25.2 fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmcblk0p1 fsck exited with status code 8 [ 14.188357] systemd-fsck[191]: BOOT: clean, 123350/240000 files, 777018/958208 blocks [ 21.141667] remoteproc1: failed to load am335x-pru0-fw [ 21.165857] remoteproc1: request_firmware failed: -2 [ 21.170942] pru-rproc 4a334000.pru0: rproc_boot failed [ 21.555665] remoteproc1: failed to load am335x-pru1-fw [ 21.561101] remoteproc1: request_firmware failed: -2 [ 21.686423] pru-rproc 4a338000.pru1: rproc_boot failed Debian GNU/Linux 8 beaglebone ttyS0 BeagleBoard.org Debian Image 2016-01-24 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] The IP Address for usb0 is: 192.168.7.2 Thanks, Gladys The information contained in this message may be confidential and legally protected under applicable law. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, forwarding, dissemination, or reproduction of this message is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message. |