[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Install ok, boot fail



I'm using an ADLINk Nanox-tx, The Bios ia an American Megatrends A1.2
The BIOS reports that EMT64 is supported.
Boot settings are coorect. I took care to set the HD as first device, but with no joy.

The system succesfully boot the installation ISO from USB, so I also tried to put the HD in an USB interface adapter but again without results.

I started installing the Debian AMD64 bit version. Thought that this was the problen, I did another installation with the i386 distro, but still without results.

>>"I've seen HP EFI32/64 craptops that just did not run grub but whatever windows loader they could come up with."

That looks to be a similar case: Windows was ok.

Thanks!

Fabrizio


2016-02-05 15:20 GMT+01:00 <debian@semioptimal.net>:
Hi Fabrizio,

> I'm using a single board computer
you need to be more specific. What Computer? As you're saying BIOS and later on other computer this sounds like i386 or amd64. But is it
- EFI64
- EFI32
- actually BIOS?

other than that:
boot settings correct?

I've seen HP EFI32/64 craptops that just did not run grub but whatever windows loader they could come up with.

Regards, Arian




--
Fabrizio

Reply to: